Overall: 3256/7232 fields covered

ADC

0x40012400: Analog to digital converter

88/88 fields covered. Toggle Registers.

STAT

status register

Offset: 0x0, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STRC
rw 		STIC
rw 		EOIC
rw 		EOC
rw 		WDE
rw
Toggle Fields.

WDE

Bit 0: Analog watchdog event flag.

Allowed values:
0: NoEvent: No analog watchdog event occurred
1: Event: Analog watchdog event occurred

EOC

Bit 1: End of group conversion flag.

Allowed values:
0: NotComplete: Conversion is not complete
1: Complete: Conversion complete

EOIC

Bit 2: End of inserted group conversion flag.

Allowed values:
0: NotComplete: Conversion is not complete
1: Complete: Conversion complete

STIC

Bit 3: Start flag of inserted channel group.

Allowed values:
0: NotStarted: No inserted channel group conversion started
1: Started: Inserted channel group conversion has started

STRC

Bit 4: Start flag of regular channel group.

Allowed values:
0: NotStarted: No regular channel conversion started
1: Started: Regular channel conversion has started

CTL0

control register 0

Offset: 0x4, reset: 0x00000000, access: read-write

13/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DRES
rw 		RWDEN
rw 		IWDEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DISNUM
rw 		DISIC
rw 		DISRC
rw 		ICA
rw 		WDSC
rw 		SM
rw 		EOICIE
rw 		WDEIE
rw 		EOCIE
rw 		WDCHSEL
rw
Toggle Fields.

WDCHSEL

Bits 0-4: Analog watchdog channel select.

Allowed values: 0-18

EOCIE

Bit 5: Interrupt enable for EOC.

Allowed values:
0: Disabled: EOC interrupt disabled
1: Enabled: EOC interrupt enabled. An interrupt is generated when the EOC bit is set

WDEIE

Bit 6: Interrupt enable for WDE.

Allowed values:
0: Disabled: WDE interrupt disabled
1: Enabled: WDE interrupt enabled. An interrupt is generated when the WDE bit is set

EOICIE

Bit 7: Interrupt enable for EOIC.

Allowed values:
0: Disabled: EOIC interrupt disabled
1: Enabled: EOIC interrupt enabled. An interrupt is generated when the EOIC bit is set

SM

Bit 8: Scan mode.

Allowed values:
0: Disabled: Scan mode disabled
1: Enabled: Scan mode enabled

WDSC

Bit 9: When in scan mode, analog watchdog is effective on a single channel.

Allowed values:
0: All: Analog watchdog enabled on all channels
1: Single: Analog watchdog enabled on a single channel

ICA

Bit 10: Inserted channel group convert automatically.

Allowed values:
0: Disabled: Automatic inserted group conversion disabled
1: Enabled: Automatic inserted group conversion enabled

DISRC

Bit 11: Discontinuous mode on regular channels.

Allowed values:
0: Disabled: Discontinuous mode on regular channels disabled
1: Enabled: Discontinuous mode on regular channels enabled

DISIC

Bit 12: Discontinuous mode on injected channels.

Allowed values:
0: Disabled: Discontinuous mode on inserted channels disabled
1: Enabled: Discontinuous mode on inserted channels enabled

DISNUM

Bits 13-15: Number of conversions in discontinuous mode.

Allowed values: 0-7

IWDEN

Bit 22: Inserted channel analog watchdog enable.

Allowed values:
0: Disabled: Analog watchdog disabled on inserted channels
1: Enabled: Analog watchdog enabled on inserted channels

RWDEN

Bit 23: Regular channel analog watchdog enable.

Allowed values:
0: Disabled: Analog watchdog disabled on regular channels
1: Enabled: Analog watchdog enabled on regular channels

DRES

Bits 24-25: ADC resolution.

Allowed values:
0: Bits12: 12 bit resolution
1: Bits10: 10 bit resolution
2: Bits8: 8 bit resolution
3: Bits6: 6 bit resolution

CTL1

control register 1

Offset: 0x8, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VBATEN
rw 		TSVREN
rw 		SWRCST
rw 		SWICST
rw 		ETERC
rw 		ETSRC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETEIC
rw 		ETSIC
rw 		DAL
rw 		DMA
rw 		RSTCLB
rw 		CLB
rw 		CTN
rw 		ADCON
rw
Toggle Fields.

ADCON

Bit 0: ADC ON.

Allowed values:
0: Disabled: Disable ADC conversion/calibration and go to power down mode
1: Enabled: Enable ADC and to start conversion

CTN

Bit 1: Continuous mode.

Allowed values:
0: Single: Single conversion mode
1: Continuous: Continuous conversion mode

CLB

Bit 2: ADC calibration.

Allowed values:
0: Complete: Calibration completed
1: NotComplete: Calibrating

RSTCLB

Bit 3: Reset calibration.

Allowed values:
0: Complete: Calibration completed
1: NotComplete: Calibrating

DMA

Bit 8: DMA request enable.

Allowed values:
0: Disabled: DMA mode disabled
1: Enabled: DMA mode enabled

DAL

Bit 11: Data alignment.

Allowed values:
0: Right: Right alignment
1: Left: Left alignment

ETSIC

Bits 12-14: External trigger select for inserted channel.

Allowed values:
0: Timer0Trgo: Timer 0 TRGO event
1: Timer0Ch3: Timer 0 channel 3 event
2: Timer1Trgo: Timer 1 TRGO event
3: Timer1Ch0: Timer 1 channel 0 event
4: Timer2Ch2: Timer 2 channel 3 event
5: Timer14Trgo: Timer 14 TRGO event
6: Exti15: EXTI line 15
7: Swicst: SWICST

ETEIC

Bit 15: External trigger enable for inserted channel.

Allowed values:
0: Disabled: Conversion on external event disabled
1: Enabled: Conversion on external event enabled

ETSRC

Bits 17-19: External trigger select for regular channel.

Allowed values:
0: Timer0Ch0: Timer 0 channel 0 event
1: Timer0Ch1: Timer 0 channel 1 event
2: Timer0Ch2: Timer 0 channel 2 event
3: Timer1Ch1: Timer 1 channel 1 event
4: Timer2Trgo: Timer 2 TRGO event
5: Timer14Ch0: Timer 14 channel 0 event
6: Exti11: EXTI line 11
7: Swrcst: SWRCST

ETERC

Bit 20: External trigger enable for regular channel.

Allowed values:
0: Disabled: Conversion on external event disabled
1: Enabled: Conversion on external event enabled

SWICST

Bit 21: Start on inserted channel.

Allowed values:
0: Started: Reset state
1: NotStarted: Starting conversion of inserted channels

SWRCST

Bit 22: Start on regular channel.

Allowed values:
0: Started: Reset state
1: NotStarted: Starting conversion of regular channels

TSVREN

Bit 23: Channel 16 and 17 enable of ADC.

Allowed values:
0: Disabled: Channel 16 and 17 disabled
1: Enabled: Channel 16 and 17 enabled

VBATEN

Bit 24: enable/disable the VBAT channel.

Allowed values:
0: Disabled: VBAT channel disabled
1: Enabled: VBAT channel enabled

SAMPT0

Sampling time register 1

Offset: 0xC, reset: 0x00000000, access: read-write

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SPT18
rw 		SPT17
rw 		SPT16
rw 		SPT15
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPT15
rw 		SPT14
rw 		SPT13
rw 		SPT12
rw 		SPT11
rw 		SPT10
rw
Toggle Fields.

SPT10

Bits 0-2: Channel 10 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT11

Bits 3-5: Channel 11 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT12

Bits 6-8: Channel 12 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT13

Bits 9-11: Channel 13 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT14

Bits 12-14: Channel 14 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT15

Bits 15-17: Channel 15 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT16

Bits 18-20: Channel 16 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT17

Bits 21-23: Channel 17 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT18

Bits 24-26: Channel 18 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SAMPT1

Sampling time register 2

Offset: 0x10, reset: 0x00000000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SPT9
rw 		SPT8
rw 		SPT7
rw 		SPT6
rw 		SPT5
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPT5
rw 		SPT4
rw 		SPT3
rw 		SPT2
rw 		SPT1
rw 		SPT0
rw
Toggle Fields.

SPT0

Bits 0-2: Channel 0 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT1

Bits 3-5: Channel 1 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT2

Bits 6-8: Channel 2 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT3

Bits 9-11: Channel 3 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT4

Bits 12-14: Channel 4 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT5

Bits 15-17: Channel 5 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT6

Bits 18-20: Channel 6 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT7

Bits 21-23: Channel 7 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT8

Bits 24-26: Channel 8 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

SPT9

Bits 27-29: Channel 9 sample time selection.

Allowed values:
0: Cycles1_5: 1.5 ADC clock cycles
1: Cycles7_5: 7.5 ADC clock cycles
2: Cycles13_5: 13.5 ADC clock cycles
3: Cycles28_5: 28.5 ADC clock cycles
4: Cycles41_5: 41.5 ADC clock cycles
5: Cycles55_5: 55.5 ADC clock cycles
6: Cycles71_5: 71.5 ADC clock cycles
7: Cycles239_5: 239.5 ADC clock cycles

IOFF0

Inserted channel data offset register 0

Offset: 0x14, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOFF
rw
Toggle Fields.

IOFF

Bits 0-11: Data offset for inserted channel 0.

Allowed values: 0-4095

IOFF1

Inserted channel data offset register 1

Offset: 0x18, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOFF
rw
Toggle Fields.

IOFF

Bits 0-11: Data offset for inserted channel 1.

Allowed values: 0-4095

IOFF2

Inserted channel data offset register 2

Offset: 0x1C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOFF
rw
Toggle Fields.

IOFF

Bits 0-11: Data offset for inserted channel 2.

Allowed values: 0-4095

IOFF3

Inserted channel data offset register 3

Offset: 0x20, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IOFF
rw
Toggle Fields.

IOFF

Bits 0-11: Data offset for inserted channel 3.

Allowed values: 0-4095

WDHT

watchdog higher threshold register

Offset: 0x24, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDHT
rw
Toggle Fields.

WDHT

Bits 0-11: Analog watchdog higher threshold.

Allowed values: 0-4095

WDLT

watchdog lower threshold register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDLT
rw
Toggle Fields.

WDLT

Bits 0-11: Analog watchdog lower threshold.

Allowed values: 0-4095

RSQ0

regular sequence register 0

Offset: 0x2C, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RL
rw 		RSQ16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSQ16
rw 		RSQ15
rw 		RSQ14
rw 		RSQ13
rw
Toggle Fields.

RSQ13

Bits 0-4: 13th conversion in regular sequence.

Allowed values: 0-18

RSQ14

Bits 5-9: 14th conversion in regular sequence.

Allowed values: 0-18

RSQ15

Bits 10-14: 15th conversion in regular sequence.

Allowed values: 0-18

RSQ16

Bits 15-19: 16th conversion in regular sequence.

Allowed values: 0-18

RL

Bits 20-23: Regular channel group length.

Allowed values: 0-15

RSQ1

regular sequence register 1

Offset: 0x30, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSQ12
rw 		RSQ11
rw 		RSQ10
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSQ10
rw 		RSQ9
rw 		RSQ8
rw 		RSQ7
rw
Toggle Fields.

RSQ7

Bits 0-4: 7th conversion in regular sequence.

Allowed values: 0-18

RSQ8

Bits 5-9: 8th conversion in regular sequence.

Allowed values: 0-18

RSQ9

Bits 10-14: 9th conversion in regular sequence.

Allowed values: 0-18

RSQ10

Bits 15-19: 10th conversion in regular sequence.

Allowed values: 0-18

RSQ11

Bits 20-24: 11th conversion in regular sequence.

Allowed values: 0-18

RSQ12

Bits 25-29: 12th conversion in regular sequence.

Allowed values: 0-18

RSQ2

regular sequence register 2

Offset: 0x34, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RSQ6
rw 		RSQ5
rw 		RSQ4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RSQ4
rw 		RSQ3
rw 		RSQ2
rw 		RSQ1
rw
Toggle Fields.

RSQ1

Bits 0-4: 1st conversion in regular sequence.

Allowed values: 0-18

RSQ2

Bits 5-9: 2nd conversion in regular sequence.

Allowed values: 0-18

RSQ3

Bits 10-14: 3rd conversion in regular sequence.

Allowed values: 0-18

RSQ4

Bits 15-19: 4th conversion in regular sequence.

Allowed values: 0-18

RSQ5

Bits 20-24: 5th conversion in regular sequence.

Allowed values: 0-18

RSQ6

Bits 25-29: 6th conversion in regular sequence.

Allowed values: 0-18

ISQ

Inserted sequence register

Offset: 0x38, reset: 0x00000000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IL
rw 		ISQ4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISQ4
rw 		ISQ3
rw 		ISQ2
rw 		ISQ1
rw
Toggle Fields.

ISQ1

Bits 0-4: 1st conversion in injected sequence.

Allowed values: 0-18

ISQ2

Bits 5-9: 2nd conversion in injected sequence.

Allowed values: 0-18

ISQ3

Bits 10-14: 3rd conversion in injected sequence.

Allowed values: 0-18

ISQ4

Bits 15-19: 4th conversion in injected sequence.

Allowed values: 0-18

IL

Bits 20-21: Inserted channel group length.

Allowed values: 0-3

IDATA0

injected data register 0

Offset: 0x3C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDATAn
r
Toggle Fields.

IDATAn

Bits 0-15: Inserted number n conversion data.

Allowed values: 0-65535

IDATA1

injected data register 1

Offset: 0x40, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDATAn
r
Toggle Fields.

IDATAn

Bits 0-15: Inserted number n conversion data.

Allowed values: 0-65535

IDATA2

injected data register 2

Offset: 0x44, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDATAn
r
Toggle Fields.

IDATAn

Bits 0-15: Inserted number n conversion data.

Allowed values: 0-65535

IDATA3

injected data register 3

Offset: 0x48, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDATAn
r
Toggle Fields.

IDATAn

Bits 0-15: Inserted number n conversion data.

Allowed values: 0-65535

RDATA

regular data register

Offset: 0x4C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDATA
r
Toggle Fields.

RDATA

Bits 0-15: Regular channel data.

Allowed values: 0-65535

OVSAMPCTL

oversample control register

Offset: 0x80, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TOVS
rw 		OVSS
rw 		OVSR
rw 		OVSEN
rw
Toggle Fields.

OVSEN

Bit 0: Oversampler Enable.

Allowed values:
0: Disabled: Oversampling disabled
1: Enabled: Oversampling enabled

OVSR

Bits 2-4: Oversampling ratio.

Allowed values:
0: Times2: 2x
1: Times4: 4x
2: Times8: 8x
3: Times16: 16x
4: Times32: 32x
5: Times64: 64x
6: Times128: 128x
7: Times256: 256x

OVSS

Bits 5-8: Oversampling shift.

Allowed values: 0-8

TOVS

Bit 9: Triggered Oversampling.

Allowed values:
0: Consecutive: All oversampled conversions are done consecutively
1: Individual: Each oversampled conversion needs a trigger

CAN0

0x40006400: Controller area network

263/2061 fields covered. Toggle Registers.

CTL

Control register

Offset: 0x0, reset: 0x00010002, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DFZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWRST
rw 		TTC
rw 		ABOR
rw 		AWU
rw 		ARD
rw 		RFOD
rw 		TFO
rw 		SLPWMOD
rw 		IWMOD
rw
Toggle Fields.

IWMOD

Bit 0: Initial working mode.

Allowed values:
0: Disabled: Disable initial working mode
1: Enabled: Enable initial working mode

SLPWMOD

Bit 1: Sleep working mode.

Allowed values:
0: Active: Disable sleep mode, bus activity detected
1: Sleep: Enable sleep mode

TFO

Bit 2: Transmit FIFO order.

Allowed values:
0: Identifier: Order by identifier of the frame
1: FIFO: First in first out order

RFOD

Bit 3: Receive FIFO overwrite disable.

Allowed values:
0: Overwrite: Overwrite full receive FIFO with incoming frame
1: Discard: Discard incoming frame when receive FIFO is full

ARD

Bit 4: Automatic retransmission disable.

Allowed values:
0: Enabled: Enable automatic retransmission
1: Disabled: Disable automatic retransmission

AWU

Bit 5: Automatic wakeup.

Allowed values:
0: Manual: Sleep state is set by software
1: Automatic: Sleep state is set automatically by hardware

ABOR

Bit 6: Automatic bus-off recovery.

Allowed values:
0: Manual: Bus off state is set by software
1: Automatic: Bus off state is set automatically by hardware

TTC

Bit 7: Time-triggered communication.

Allowed values:
0: Disabled: Disable time-triggered communication
1: Enabled: Enable time-triggered communication

SWRST

Bit 15: Software reset.

Allowed values:
0: NotResetting: Finished resetting
1: Resetting: Reset in progress

DFZ

Bit 16: Debug freeze.

Allowed values:
0: Continue: Continue running CAN during debug
1: Stop: Stop CAN reception and transmission during debug hold

STAT

Status register

Offset: 0x4, reset: 0x00000C02, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXL
r 		LASTRX
r 		RS
r 		TS
r 		SLPIF
rw 		WUIF
rw 		ERRIF
rw 		SLPWS
r 		IWS
r
Toggle Fields.

IWS

Bit 0: Initial working state.

Allowed values:
0: Normal: CAN is not in initial working mode
1: Initial: CAN is in initial working mode

SLPWS

Bit 1: Sleep working state.

Allowed values:
0: Normal: CAN is not in sleep working mode
1: Sleeping: CAN is in sleep working mode

ERRIF

Bit 2: Error interrupt flag.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

WUIF

Bit 3: Status change interrupt flag of wakeup from sleep working mode.

Allowed values:
0: NoWakeup: No wakeup event
1: Wakeup: Wakeup event

SLPIF

Bit 4: Status change interrupt flag of sleep working mode entering.

Allowed values:
0: Awake: CAN is not entering sleep working mode
1: Sleeping: CAN is entering sleep working mode

TS

Bit 8: Transmitting state.

Allowed values:
0: NotWorking: CAN is not working in transmitting state
1: Working: CAN is working in transmitting state

RS

Bit 9: Receiving state.

Allowed values:
0: NotWorking: CAN is not working in receiving state
1: Working: CAN is working in receiving state

LASTRX

Bit 10: Last sample value of Rx pin.

RXL

Bit 11: RX level.

TSTAT

Transmit status register

Offset: 0x8, reset: 0x1C000000, access: Unspecified

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TMLS2
r 		TMLS1
r 		TMLS0
r 		TME2
r 		TME1
r 		TME0
r 		NUM
r 		MST2
rw 		MTE2
rw 		MAL2
rw 		MTFNERR2
rw 		MTF2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MST1
rw 		MTE1
rw 		MAL1
rw 		MTFNERR1
rw 		MTF1
rw 		MST0
rw 		MTE0
rw 		MAL0
rw 		MTFNERR0
rw 		MTF0
rw
Toggle Fields.

MTF0

Bit 0: Mailbox 0 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR0

Bit 1: Mailbox 0 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL0

Bit 2: Mailbox 0 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE0

Bit 3: Mailbox 0 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST0

Bit 7: Mailbox 0 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

MTF1

Bit 8: Mailbox 1 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR1

Bit 9: Mailbox 1 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL1

Bit 10: Mailbox 1 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE1

Bit 11: Mailbox 1 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST1

Bit 15: Mailbox 1 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

MTF2

Bit 16: Mailbox 2 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR2

Bit 17: Mailbox 2 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL2

Bit 18: Mailbox 2 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE2

Bit 19: Mailbox 2 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST2

Bit 23: Mailbox 2 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

NUM

Bits 24-25: number of the transmit FIFO mailbox in which the frame will be transmitted if at least one mailbox is empty.

Allowed values: 0-2

TME0

Bit 26: Transmit mailbox 0 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TME1

Bit 27: Transmit mailbox 1 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TME2

Bit 28: Transmit mailbox 2 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TMLS0

Bit 29: Transmit mailbox 0 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

TMLS1

Bit 30: Transmit mailbox 1 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

TMLS2

Bit 31: Transmit mailbox 2 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

RFIFO0

Receive message FIFO0 register

Offset: 0xC, reset: 0x00000000, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFD0
rw 		RFO0
rw 		RFF0
rw 		RFL0
r
Toggle Fields.

RFL0

Bits 0-1: Receive FIFO 0 length.

Allowed values: 0-3

RFF0

Bit 3: Receive FIFO 0 full.

Allowed values:
0: NotFull: Receive FIFO is not full
1: Full: Receive FIFO is full

RFO0

Bit 4: Receive FIFO 0 overfull.

Allowed values:
0: NotOverfull: Receive FIFO is not overfull
1: Overfull: Receive FIFO is overfull

RFD0

Bit 5: Receive FIFO 0 dequeue.

Allowed values:
0: Finished: Dequeuing done
1: InProgress: Dequeuing in progress

RFIFO1

Receive message FIFO1 register

Offset: 0x10, reset: 0x00000000, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFD1
rw 		RFO1
rw 		RFF1
rw 		RFL1
r
Toggle Fields.

RFL1

Bits 0-1: Receive FIFO1 length.

Allowed values: 0-3

RFF1

Bit 3: Receive FIFO1 full.

Allowed values:
0: NotFull: Receive FIFO is not full
1: Full: Receive FIFO is full

RFO1

Bit 4: Receive FIFO1 overfull.

Allowed values:
0: NotOverfull: Receive FIFO is not overfull
1: Overfull: Receive FIFO is overfull

RFD1

Bit 5: Receive FIFO1 dequeue.

Allowed values:
0: Finished: Dequeuing done
1: InProgress: Dequeuing in progress

INTEN

Interrupt enable register

Offset: 0x14, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SLPWIE
rw 		WIE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRIE
rw 		ERRNIE
rw 		BOIE
rw 		PERRIE
rw 		WERRIE
rw 		RFOIE1
rw 		RFFIE1
rw 		RFNEIE1
rw 		RFOIE0
rw 		RFFIE0
rw 		RFNEIE0
rw 		TMEIE
rw
Toggle Fields.

TMEIE

Bit 0: Transmit mailbox empty interrupt enable.

Allowed values:
0: Disabled: Transmit mailbox empty interrupt is disabled
1: Enabled: Transmit mailbox empty interrupt is enabled

RFNEIE0

Bit 1: Receive FIFO0 not empty interrupt enable.

Allowed values:
0: Disabled: Receive FIFO not empty interrupt is disabled
1: Enabled: Receive FIFO not empty interrupt is enabled

RFFIE0

Bit 2: Receive FIFO0 full interrupt enable.

Allowed values:
0: Disabled: Receive FIFO full interrupt is disabled
1: Enabled: Receive FIFO full interrupt is enabled

RFOIE0

Bit 3: Receive FIFO0 overfull interrupt enable.

Allowed values:
0: Disabled: Receive FIFO overfull interrupt is disabled
1: Enabled: Receive FIFO overfull interrupt is enabled

RFNEIE1

Bit 4: Receive FIFO1 not empty interrupt enable.

Allowed values:
0: Disabled: Receive FIFO not empty interrupt is disabled
1: Enabled: Receive FIFO not empty interrupt is enabled

RFFIE1

Bit 5: Receive FIFO1 full interrupt enable.

Allowed values:
0: Disabled: Receive FIFO full interrupt is disabled
1: Enabled: Receive FIFO full interrupt is enabled

RFOIE1

Bit 6: Receive FIFO1 overfull interrupt enable.

Allowed values:
0: Disabled: Receive FIFO overfull interrupt is disabled
1: Enabled: Receive FIFO overfull interrupt is enabled

WERRIE

Bit 8: Warning error interrupt enable.

Allowed values:
0: Disabled: Warning error interrupt is disabled
1: Enabled: Warning error interrupt is enabled

PERRIE

Bit 9: Passive error interrupt enable.

Allowed values:
0: Disabled: Passive error interrupt is disabled
1: Enabled: Passive error interrupt is enabled

BOIE

Bit 10: Bus-off interrupt enable.

Allowed values:
0: Disabled: Bus-off interrupt is disabled
1: Enabled: Bus-off interrupt is enabled

ERRNIE

Bit 11: Error number interrupt enable.

Allowed values:
0: Disabled: Error number interrupt is disabled
1: Enabled: Error number interrupt is enabled

ERRIE

Bit 15: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt is disabled
1: Enabled: Error interrupt is enabled

WIE

Bit 16: Wakeup interrupt enable.

Allowed values:
0: Disabled: Wakeup interrupt is disabled
1: Enabled: Wakeup interrupt is enabled

SLPWIE

Bit 17: Sleep working interrupt enable.

Allowed values:
0: Disabled: Sleep working interrupt is disabled
1: Enabled: Sleep working interrupt is enabled

ERR

Error register

Offset: 0x18, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RECNT
r 		TECNT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRN
rw 		BOERR
r 		PERR
r 		WERR
r
Toggle Fields.

WERR

Bit 0: Warning error.

Allowed values:
0: NoError: No warning error
1: Error: Warning error

PERR

Bit 1: Passive error.

Allowed values:
0: NoError: No passive error
1: Error: Passive error

BOERR

Bit 2: Bus-off error.

Allowed values:
0: NoError: No bus-off error
1: Error: Bus-off error

ERRN

Bits 4-6: Error number.

Allowed values:
0: NoError: No Error
1: Stuff: Stuff Error
2: Form: Form Error
3: Ack: Acknowledgment Error
4: BitRecessive: Bit recessive Error
5: BitDominant: Bit dominant Error
6: Crc: CRC Error
7: Custom: Set by software

TECNT

Bits 16-23: Transmit Error Count.

Allowed values: 0-255

RECNT

Bits 24-31: Receive Error Count.

Allowed values: 0-255

BT

Bit timing register

Offset: 0x1C, reset: 0x12300000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SCMOD
rw 		LCMOD
rw 		SJW
rw 		BS2
rw 		BS1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BAUDPSC
rw
Toggle Fields.

BAUDPSC

Bits 0-9: Baud rate prescaler.

Allowed values: 0-1023

BS1

Bits 16-19: Bit segment 1.

Allowed values: 0-3

BS2

Bits 20-22: Bit segment 2.

Allowed values: 0-3

SJW

Bits 24-25: Resynchronization jump width.

Allowed values: 0-3

LCMOD

Bit 30: Loopback communication mode.

Allowed values:
0: Disabled: Loop Back Mode disabled
1: Enabled: Loop Back Mode enabled

SCMOD

Bit 31: Silent communication mode.

Allowed values:
0: Normal: Normal operation
1: Silent: Silent Mode

TMI0

Transmit mailbox identifier register 0

Offset: 0x180, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP0

Transmit mailbox property register 0

Offset: 0x184, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA00

Transmit mailbox data0 register

Offset: 0x188, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA10

Transmit mailbox data1 register

Offset: 0x18C, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

TMI1

Transmit mailbox identifier register

Offset: 0x190, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP1

Transmit mailbox property register

Offset: 0x194, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA01

Transmit mailbox data0 register

Offset: 0x198, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA11

Transmit mailbox data1 register

Offset: 0x19C, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

TMI2

Transmit mailbox identifier register

Offset: 0x1A0, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP2

Transmit mailbox property register

Offset: 0x1A4, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA02

Transmit mailbox data0 register

Offset: 0x1A8, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA12

Transmit mailbox data1 register

Offset: 0x1AC, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

RFIFOMI0

Receive FIFO mailbox identifier register

Offset: 0x1B0, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
r 		EFID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
r 		FF
r 		FT
r
Toggle Fields.

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

RFIFOMP0

Receive FIFO mailbox property register

Offset: 0x1B4, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FI
r 		DLENC
r
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

FI

Bits 8-15: Filtering index.

Allowed values: 0-255

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

RFIFOMDATA00

Receive FIFO mailbox data0 register

Offset: 0x1B8, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
r 		DB2
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
r 		DB0
r
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

RFIFOMDATA10

Receive FIFO mailbox data1 register

Offset: 0x1BC, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
r 		DB6
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
r 		DB4
r
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

RFIFOMI1

Receive FIFO mailbox identifier register

Offset: 0x1C0, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
r 		EFID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
r 		FF
r 		FT
r
Toggle Fields.

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

RFIFOMP1

Receive FIFO mailbox property register

Offset: 0x1C4, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FI
r 		DLENC
r
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

FI

Bits 8-15: Filtering index.

Allowed values: 0-255

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

RFIFOMDATA01

Receive FIFO mailbox data0 register

Offset: 0x1C8, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
r 		DB2
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
r 		DB0
r
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

RFIFOMDATA11

Receive FIFO mailbox data1 register

Offset: 0x1CC, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
r 		DB6
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
r 		DB4
r
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

FCTL

Filter control register

Offset: 0x200, reset: 0x2A1C0E01, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HBC1F
rw 		FLD
rw
Toggle Fields.

FLD

Bit 0: Filter lock disable.

Allowed values:
0: Disabled: Filter lock disabled
1: Enabled: Filter lock enabled

HBC1F

Bits 8-13: Header bank of CAN1 filter.

Allowed values: 0-28

FMCFG

Filter mode configuration register

Offset: 0x204, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FMOD27
rw 		FMOD26
rw 		FMOD25
rw 		FMOD24
rw 		FMOD23
rw 		FMOD22
rw 		FMOD21
rw 		FMOD20
rw 		FMOD19
rw 		FMOD18
rw 		FMOD17
rw 		FMOD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FMOD15
rw 		FMOD14
rw 		FMOD13
rw 		FMOD12
rw 		FMOD11
rw 		FMOD10
rw 		FMOD9
rw 		FMOD8
rw 		FMOD7
rw 		FMOD6
rw 		FMOD5
rw 		FMOD4
rw 		FMOD3
rw 		FMOD2
rw 		FMOD1
rw 		FMOD0
rw
Toggle Fields.

FMOD0

Bit 0: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD1

Bit 1: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD2

Bit 2: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD3

Bit 3: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD4

Bit 4: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD5

Bit 5: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD6

Bit 6: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD7

Bit 7: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD8

Bit 8: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD9

Bit 9: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD10

Bit 10: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD11

Bit 11: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD12

Bit 12: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD13

Bit 13: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD14

Bit 14: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD15

Bit 15: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD16

Bit 16: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD17

Bit 17: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD18

Bit 18: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD19

Bit 19: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD20

Bit 20: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD21

Bit 21: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD22

Bit 22: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD23

Bit 23: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD24

Bit 24: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD25

Bit 25: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD26

Bit 26: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD27

Bit 27: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FSCFG

Filter scale configuration register

Offset: 0x20C, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FS27
rw 		FS26
rw 		FS25
rw 		FS24
rw 		FS23
rw 		FS22
rw 		FS21
rw 		FS20
rw 		FS19
rw 		FS18
rw 		FS17
rw 		FS16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FS15
rw 		FS14
rw 		FS13
rw 		FS12
rw 		FS11
rw 		FS10
rw 		FS9
rw 		FS8
rw 		FS7
rw 		FS6
rw 		FS5
rw 		FS4
rw 		FS3
rw 		FS2
rw 		FS1
rw 		FS0
rw
Toggle Fields.

FS0

Bit 0: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS1

Bit 1: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS2

Bit 2: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS3

Bit 3: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS4

Bit 4: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS5

Bit 5: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS6

Bit 6: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS7

Bit 7: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS8

Bit 8: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS9

Bit 9: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS10

Bit 10: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS11

Bit 11: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS12

Bit 12: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS13

Bit 13: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS14

Bit 14: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS15

Bit 15: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS16

Bit 16: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS17

Bit 17: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS18

Bit 18: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS19

Bit 19: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS20

Bit 20: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS21

Bit 21: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS22

Bit 22: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS23

Bit 23: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS24

Bit 24: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS25

Bit 25: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS26

Bit 26: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS27

Bit 27: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FAFIFO

Filter associated FIFO register

Offset: 0x214, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FAF27
rw 		FAF26
rw 		FAF25
rw 		FAF24
rw 		FAF23
rw 		FAF22
rw 		FAF21
rw 		FAF20
rw 		FAF19
rw 		FAF18
rw 		FAF17
rw 		FAF16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FAF15
rw 		FAF14
rw 		FAF13
rw 		FAF12
rw 		FAF11
rw 		FAF10
rw 		FAF9
rw 		FAF8
rw 		FAF7
rw 		FAF6
rw 		FAF5
rw 		FAF4
rw 		FAF3
rw 		FAF2
rw 		FAF1
rw 		FAF0
rw
Toggle Fields.

FAF0

Bit 0: Filter 0 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF1

Bit 1: Filter 1 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF2

Bit 2: Filter 2 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF3

Bit 3: Filter 3 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF4

Bit 4: Filter 4 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF5

Bit 5: Filter 5 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF6

Bit 6: Filter 6 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF7

Bit 7: Filter 7 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF8

Bit 8: Filter 8 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF9

Bit 9: Filter 9 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF10

Bit 10: Filter 10 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF11

Bit 11: Filter 11 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF12

Bit 12: Filter 12 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF13

Bit 13: Filter 13 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF14

Bit 14: Filter 14 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF15

Bit 15: Filter 15 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF16

Bit 16: Filter 16 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF17

Bit 17: Filter 17 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF18

Bit 18: Filter 18 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF19

Bit 19: Filter 19 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF20

Bit 20: Filter 20 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF21

Bit 21: Filter 21 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF22

Bit 22: Filter 22 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF23

Bit 23: Filter 23 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF24

Bit 24: Filter 24 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF25

Bit 25: Filter 25 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF26

Bit 26: Filter 26 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF27

Bit 27: Filter 27 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FW

Filter working register

Offset: 0x21C, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FW27
rw 		FW26
rw 		FW25
rw 		FW24
rw 		FW23
rw 		FW22
rw 		FW21
rw 		FW20
rw 		FW19
rw 		FW18
rw 		FW17
rw 		FW16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FW15
rw 		FW14
rw 		FW13
rw 		FW12
rw 		FW11
rw 		FW10
rw 		FW9
rw 		FW8
rw 		FW7
rw 		FW6
rw 		FW5
rw 		FW4
rw 		FW3
rw 		FW2
rw 		FW1
rw 		FW0
rw
Toggle Fields.

FW0

Bit 0: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW1

Bit 1: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW2

Bit 2: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW3

Bit 3: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW4

Bit 4: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW5

Bit 5: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW6

Bit 6: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW7

Bit 7: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW8

Bit 8: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW9

Bit 9: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW10

Bit 10: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW11

Bit 11: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW12

Bit 12: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW13

Bit 13: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW14

Bit 14: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW15

Bit 15: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW16

Bit 16: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW17

Bit 17: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW18

Bit 18: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW19

Bit 19: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW20

Bit 20: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW21

Bit 21: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW22

Bit 22: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW23

Bit 23: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW24

Bit 24: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW25

Bit 25: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW26

Bit 26: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW27

Bit 27: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

F0DATA0

Filter 0 data 0 register

Offset: 0x240, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F0DATA1

Filter 0 data 1 register

Offset: 0x244, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F1DATA0

Filter 1 data 0 register

Offset: 0x248, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F1DATA1

Filter 1 data 1 register

Offset: 0x24C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F2DATA0

Filter 2 data 0 register

Offset: 0x250, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F2DATA1

Filter 2 data 1 register

Offset: 0x254, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F3DATA0

Filter 3 data 0 register

Offset: 0x258, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F3DATA1

Filter 3 data 1 register

Offset: 0x25C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F4DATA0

Filter 4 data 0 register

Offset: 0x260, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F4DATA1

Filter 4 data 1 register

Offset: 0x264, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F5DATA0

Filter 5 data 0 register

Offset: 0x268, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F5DATA1

Filter 5 data 1 register

Offset: 0x26C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F6DATA0

Filter 6 data 0 register

Offset: 0x270, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F6DATA1

Filter 6 data 1 register

Offset: 0x274, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F7DATA0

Filter 7 data 0 register

Offset: 0x278, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F7DATA1

Filter 7 data 1 register

Offset: 0x27C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F8DATA0

Filter 8 data 0 register

Offset: 0x280, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F8DATA1

Filter 8 data 1 register

Offset: 0x284, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F9DATA0

Filter 9 data 0 register

Offset: 0x288, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F9DATA1

Filter 9 data 1 register

Offset: 0x28C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F10DATA0

Filter 10 data 0 register

Offset: 0x290, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F10DATA1

Filter 10 data 1 register

Offset: 0x294, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F11DATA0

Filter 11 data 0 register

Offset: 0x298, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F11DATA1

Filter 11 data 1 register

Offset: 0x29C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F12DATA0

Filter 12 data 0 register

Offset: 0x2A0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F12DATA1

Filter 12 data 1 register

Offset: 0x2A4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F13DATA0

Filter 13 data 0 register

Offset: 0x2A8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F13DATA1

Filter 13 data 1 register

Offset: 0x2AC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F14DATA0

Filter 14 data 0 register

Offset: 0x2B0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F14DATA1

Filter 14 data 1 register

Offset: 0x2B4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F15DATA0

Filter 15 data 0 register

Offset: 0x2B8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F15DATA1

Filter 15 data 1 register

Offset: 0x2BC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F16DATA0

Filter 16 data 0 register

Offset: 0x2C0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F16DATA1

Filter 16 data 1 register

Offset: 0x2C4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F17DATA0

Filter 17 data 0 register

Offset: 0x2C8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F17DATA1

Filter 17 data 1 register

Offset: 0x2CC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F18DATA0

Filter 18 data 0 register

Offset: 0x2D0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F18DATA1

Filter 18 data 1 register

Offset: 0x2D4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F19DATA0

Filter 19 data 0 register

Offset: 0x2D8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F19DATA1

Filter 19 data 1 register

Offset: 0x2DC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F20DATA0

Filter 20 data 0 register

Offset: 0x2E0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F20DATA1

Filter 20 data 1 register

Offset: 0x2E4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F21DATA0

Filter 21 data 0 register

Offset: 0x2E8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F21DATA1

Filter 21 data 1 register

Offset: 0x2EC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F22DATA0

Filter 22 data 0 register

Offset: 0x2F0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F22DATA1

Filter 22 data 1 register

Offset: 0x2F4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F23DATA0

Filter 23 data 0 register

Offset: 0x2F8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F23DATA1

Filter 23 data 1 register

Offset: 0x2FC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F24DATA0

Filter 24 data 0 register

Offset: 0x300, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F24DATA1

Filter 24 data 1 register

Offset: 0x304, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F25DATA0

Filter 25 data 0 register

Offset: 0x308, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F25DATA1

Filter 25 data 1 register

Offset: 0x30C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F26DATA0

Filter 26 data 0 register

Offset: 0x310, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F26DATA1

Filter 26 data 1 register

Offset: 0x314, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F27DATA0

Filter 27 data 0 register

Offset: 0x318, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F27DATA1

Filter 27 data 1 register

Offset: 0x31C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

PHYCTL

PHY control register

Offset: 0x3FC, reset: 0x00000300, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POMOD
r 		PHYEN
r
Toggle Fields.

PHYEN

Bit 0: PHY enable bit.

Allowed values:
0: Disabled: CAN PHY disabled
1: Enabled: CAN PHY enabled

POMOD

Bits 8-9: CAN PHY output driver control.

Allowed values:
0: LowSlope: Low slope mode
1: MiddleSlope: Middle slope mode
2: HighSlope: High slope mode
3: HighSpeed: High speed mode

CAN1

0x40006800: Controller area network

263/2061 fields covered. Toggle Registers.

CTL

Control register

Offset: 0x0, reset: 0x00010002, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DFZ
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWRST
rw 		TTC
rw 		ABOR
rw 		AWU
rw 		ARD
rw 		RFOD
rw 		TFO
rw 		SLPWMOD
rw 		IWMOD
rw
Toggle Fields.

IWMOD

Bit 0: Initial working mode.

Allowed values:
0: Disabled: Disable initial working mode
1: Enabled: Enable initial working mode

SLPWMOD

Bit 1: Sleep working mode.

Allowed values:
0: Active: Disable sleep mode, bus activity detected
1: Sleep: Enable sleep mode

TFO

Bit 2: Transmit FIFO order.

Allowed values:
0: Identifier: Order by identifier of the frame
1: FIFO: First in first out order

RFOD

Bit 3: Receive FIFO overwrite disable.

Allowed values:
0: Overwrite: Overwrite full receive FIFO with incoming frame
1: Discard: Discard incoming frame when receive FIFO is full

ARD

Bit 4: Automatic retransmission disable.

Allowed values:
0: Enabled: Enable automatic retransmission
1: Disabled: Disable automatic retransmission

AWU

Bit 5: Automatic wakeup.

Allowed values:
0: Manual: Sleep state is set by software
1: Automatic: Sleep state is set automatically by hardware

ABOR

Bit 6: Automatic bus-off recovery.

Allowed values:
0: Manual: Bus off state is set by software
1: Automatic: Bus off state is set automatically by hardware

TTC

Bit 7: Time-triggered communication.

Allowed values:
0: Disabled: Disable time-triggered communication
1: Enabled: Enable time-triggered communication

SWRST

Bit 15: Software reset.

Allowed values:
0: NotResetting: Finished resetting
1: Resetting: Reset in progress

DFZ

Bit 16: Debug freeze.

Allowed values:
0: Continue: Continue running CAN during debug
1: Stop: Stop CAN reception and transmission during debug hold

STAT

Status register

Offset: 0x4, reset: 0x00000C02, access: Unspecified

9/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXL
r 		LASTRX
r 		RS
r 		TS
r 		SLPIF
rw 		WUIF
rw 		ERRIF
rw 		SLPWS
r 		IWS
r
Toggle Fields.

IWS

Bit 0: Initial working state.

Allowed values:
0: Normal: CAN is not in initial working mode
1: Initial: CAN is in initial working mode

SLPWS

Bit 1: Sleep working state.

Allowed values:
0: Normal: CAN is not in sleep working mode
1: Sleeping: CAN is in sleep working mode

ERRIF

Bit 2: Error interrupt flag.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

WUIF

Bit 3: Status change interrupt flag of wakeup from sleep working mode.

Allowed values:
0: NoWakeup: No wakeup event
1: Wakeup: Wakeup event

SLPIF

Bit 4: Status change interrupt flag of sleep working mode entering.

Allowed values:
0: Awake: CAN is not entering sleep working mode
1: Sleeping: CAN is entering sleep working mode

TS

Bit 8: Transmitting state.

Allowed values:
0: NotWorking: CAN is not working in transmitting state
1: Working: CAN is working in transmitting state

RS

Bit 9: Receiving state.

Allowed values:
0: NotWorking: CAN is not working in receiving state
1: Working: CAN is working in receiving state

LASTRX

Bit 10: Last sample value of Rx pin.

RXL

Bit 11: RX level.

TSTAT

Transmit status register

Offset: 0x8, reset: 0x1C000000, access: Unspecified

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TMLS2
r 		TMLS1
r 		TMLS0
r 		TME2
r 		TME1
r 		TME0
r 		NUM
r 		MST2
rw 		MTE2
rw 		MAL2
rw 		MTFNERR2
rw 		MTF2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MST1
rw 		MTE1
rw 		MAL1
rw 		MTFNERR1
rw 		MTF1
rw 		MST0
rw 		MTE0
rw 		MAL0
rw 		MTFNERR0
rw 		MTF0
rw
Toggle Fields.

MTF0

Bit 0: Mailbox 0 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR0

Bit 1: Mailbox 0 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL0

Bit 2: Mailbox 0 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE0

Bit 3: Mailbox 0 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST0

Bit 7: Mailbox 0 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

MTF1

Bit 8: Mailbox 1 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR1

Bit 9: Mailbox 1 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL1

Bit 10: Mailbox 1 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE1

Bit 11: Mailbox 1 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST1

Bit 15: Mailbox 1 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

MTF2

Bit 16: Mailbox 2 transmit finished.

Allowed values:
0: InProgress: Mailbox transmission still in progress
1: Finished: Mailbox transmission finished

MTFNERR2

Bit 17: Mailbox 2 transmit finished and no error.

Allowed values:
0: FinishedWithError: Mailbox transmission finished with an error
1: FinishedNoError: Mailbox transmission finished with no error

MAL2

Bit 18: Mailbox 2 arbitration lost.

Allowed values:
0: NoArbitrationLost: Arbitration was not lost
1: ArbitrationLost: Arbitration lost

MTE2

Bit 19: Mailbox 2 transmit error.

Allowed values:
0: NoError: There was no error
1: Error: An error was detected

MST2

Bit 23: Mailbox 2 stop transmitting.

Allowed values:
0: NotStop: Mailbox is not stopped, or is empty
1: Stop: Stop mailbox transmitting

NUM

Bits 24-25: number of the transmit FIFO mailbox in which the frame will be transmitted if at least one mailbox is empty.

Allowed values: 0-2

TME0

Bit 26: Transmit mailbox 0 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TME1

Bit 27: Transmit mailbox 1 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TME2

Bit 28: Transmit mailbox 2 empty.

Allowed values:
0: NotEmpty: Transmit mailbox not empty
1: Empty: Transmit mailbox is empty

TMLS0

Bit 29: Transmit mailbox 0 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

TMLS1

Bit 30: Transmit mailbox 1 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

TMLS2

Bit 31: Transmit mailbox 2 last sending in transmit FIFO.

Allowed values:
0: NotLast: The mailbox doesn't have the last sending order
1: Last: The mailbox has the last sending order with at least two frames pending

RFIFO0

Receive message FIFO0 register

Offset: 0xC, reset: 0x00000000, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFD0
rw 		RFO0
rw 		RFF0
rw 		RFL0
r
Toggle Fields.

RFL0

Bits 0-1: Receive FIFO 0 length.

Allowed values: 0-3

RFF0

Bit 3: Receive FIFO 0 full.

Allowed values:
0: NotFull: Receive FIFO is not full
1: Full: Receive FIFO is full

RFO0

Bit 4: Receive FIFO 0 overfull.

Allowed values:
0: NotOverfull: Receive FIFO is not overfull
1: Overfull: Receive FIFO is overfull

RFD0

Bit 5: Receive FIFO 0 dequeue.

Allowed values:
0: Finished: Dequeuing done
1: InProgress: Dequeuing in progress

RFIFO1

Receive message FIFO1 register

Offset: 0x10, reset: 0x00000000, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFD1
rw 		RFO1
rw 		RFF1
rw 		RFL1
r
Toggle Fields.

RFL1

Bits 0-1: Receive FIFO1 length.

Allowed values: 0-3

RFF1

Bit 3: Receive FIFO1 full.

Allowed values:
0: NotFull: Receive FIFO is not full
1: Full: Receive FIFO is full

RFO1

Bit 4: Receive FIFO1 overfull.

Allowed values:
0: NotOverfull: Receive FIFO is not overfull
1: Overfull: Receive FIFO is overfull

RFD1

Bit 5: Receive FIFO1 dequeue.

Allowed values:
0: Finished: Dequeuing done
1: InProgress: Dequeuing in progress

INTEN

Interrupt enable register

Offset: 0x14, reset: 0x00000000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SLPWIE
rw 		WIE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRIE
rw 		ERRNIE
rw 		BOIE
rw 		PERRIE
rw 		WERRIE
rw 		RFOIE1
rw 		RFFIE1
rw 		RFNEIE1
rw 		RFOIE0
rw 		RFFIE0
rw 		RFNEIE0
rw 		TMEIE
rw
Toggle Fields.

TMEIE

Bit 0: Transmit mailbox empty interrupt enable.

Allowed values:
0: Disabled: Transmit mailbox empty interrupt is disabled
1: Enabled: Transmit mailbox empty interrupt is enabled

RFNEIE0

Bit 1: Receive FIFO0 not empty interrupt enable.

Allowed values:
0: Disabled: Receive FIFO not empty interrupt is disabled
1: Enabled: Receive FIFO not empty interrupt is enabled

RFFIE0

Bit 2: Receive FIFO0 full interrupt enable.

Allowed values:
0: Disabled: Receive FIFO full interrupt is disabled
1: Enabled: Receive FIFO full interrupt is enabled

RFOIE0

Bit 3: Receive FIFO0 overfull interrupt enable.

Allowed values:
0: Disabled: Receive FIFO overfull interrupt is disabled
1: Enabled: Receive FIFO overfull interrupt is enabled

RFNEIE1

Bit 4: Receive FIFO1 not empty interrupt enable.

Allowed values:
0: Disabled: Receive FIFO not empty interrupt is disabled
1: Enabled: Receive FIFO not empty interrupt is enabled

RFFIE1

Bit 5: Receive FIFO1 full interrupt enable.

Allowed values:
0: Disabled: Receive FIFO full interrupt is disabled
1: Enabled: Receive FIFO full interrupt is enabled

RFOIE1

Bit 6: Receive FIFO1 overfull interrupt enable.

Allowed values:
0: Disabled: Receive FIFO overfull interrupt is disabled
1: Enabled: Receive FIFO overfull interrupt is enabled

WERRIE

Bit 8: Warning error interrupt enable.

Allowed values:
0: Disabled: Warning error interrupt is disabled
1: Enabled: Warning error interrupt is enabled

PERRIE

Bit 9: Passive error interrupt enable.

Allowed values:
0: Disabled: Passive error interrupt is disabled
1: Enabled: Passive error interrupt is enabled

BOIE

Bit 10: Bus-off interrupt enable.

Allowed values:
0: Disabled: Bus-off interrupt is disabled
1: Enabled: Bus-off interrupt is enabled

ERRNIE

Bit 11: Error number interrupt enable.

Allowed values:
0: Disabled: Error number interrupt is disabled
1: Enabled: Error number interrupt is enabled

ERRIE

Bit 15: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt is disabled
1: Enabled: Error interrupt is enabled

WIE

Bit 16: Wakeup interrupt enable.

Allowed values:
0: Disabled: Wakeup interrupt is disabled
1: Enabled: Wakeup interrupt is enabled

SLPWIE

Bit 17: Sleep working interrupt enable.

Allowed values:
0: Disabled: Sleep working interrupt is disabled
1: Enabled: Sleep working interrupt is enabled

ERR

Error register

Offset: 0x18, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RECNT
r 		TECNT
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRN
rw 		BOERR
r 		PERR
r 		WERR
r
Toggle Fields.

WERR

Bit 0: Warning error.

Allowed values:
0: NoError: No warning error
1: Error: Warning error

PERR

Bit 1: Passive error.

Allowed values:
0: NoError: No passive error
1: Error: Passive error

BOERR

Bit 2: Bus-off error.

Allowed values:
0: NoError: No bus-off error
1: Error: Bus-off error

ERRN

Bits 4-6: Error number.

Allowed values:
0: NoError: No Error
1: Stuff: Stuff Error
2: Form: Form Error
3: Ack: Acknowledgment Error
4: BitRecessive: Bit recessive Error
5: BitDominant: Bit dominant Error
6: Crc: CRC Error
7: Custom: Set by software

TECNT

Bits 16-23: Transmit Error Count.

Allowed values: 0-255

RECNT

Bits 24-31: Receive Error Count.

Allowed values: 0-255

BT

Bit timing register

Offset: 0x1C, reset: 0x12300000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SCMOD
rw 		LCMOD
rw 		SJW
rw 		BS2
rw 		BS1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BAUDPSC
rw
Toggle Fields.

BAUDPSC

Bits 0-9: Baud rate prescaler.

Allowed values: 0-1023

BS1

Bits 16-19: Bit segment 1.

Allowed values: 0-3

BS2

Bits 20-22: Bit segment 2.

Allowed values: 0-3

SJW

Bits 24-25: Resynchronization jump width.

Allowed values: 0-3

LCMOD

Bit 30: Loopback communication mode.

Allowed values:
0: Disabled: Loop Back Mode disabled
1: Enabled: Loop Back Mode enabled

SCMOD

Bit 31: Silent communication mode.

Allowed values:
0: Normal: Normal operation
1: Silent: Silent Mode

TMI0

Transmit mailbox identifier register 0

Offset: 0x180, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP0

Transmit mailbox property register 0

Offset: 0x184, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA00

Transmit mailbox data0 register

Offset: 0x188, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA10

Transmit mailbox data1 register

Offset: 0x18C, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

TMI1

Transmit mailbox identifier register

Offset: 0x190, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP1

Transmit mailbox property register

Offset: 0x194, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA01

Transmit mailbox data0 register

Offset: 0x198, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA11

Transmit mailbox data1 register

Offset: 0x19C, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

TMI2

Transmit mailbox identifier register

Offset: 0x1A0, reset: 0x00000000, access: read-write

3/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
rw 		EFID
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
rw 		FF
rw 		FT
rw 		TEN
rw
Toggle Fields.

TEN

Bit 0: Transmit enable.

Allowed values:
0: Disabled: Transmit disabled
1: Enabled: Transmit enabled

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

TMP2

Transmit mailbox property register

Offset: 0x1A4, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSEN
rw 		DLENC
rw
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

TSEN

Bit 8: Time stamp enable.

Allowed values:
0: Disabled: Timestamp disabled
1: Enabled: Timestamp enabled

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

TMDATA02

Transmit mailbox data0 register

Offset: 0x1A8, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
rw 		DB2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
rw 		DB0
rw
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

TMDATA12

Transmit mailbox data1 register

Offset: 0x1AC, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
rw 		DB6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
rw 		DB4
rw
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

RFIFOMI0

Receive FIFO mailbox identifier register

Offset: 0x1B0, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
r 		EFID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
r 		FF
r 		FT
r
Toggle Fields.

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

RFIFOMP0

Receive FIFO mailbox property register

Offset: 0x1B4, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FI
r 		DLENC
r
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

FI

Bits 8-15: Filtering index.

Allowed values: 0-255

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

RFIFOMDATA00

Receive FIFO mailbox data0 register

Offset: 0x1B8, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
r 		DB2
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
r 		DB0
r
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

RFIFOMDATA10

Receive FIFO mailbox data1 register

Offset: 0x1BC, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
r 		DB6
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
r 		DB4
r
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

RFIFOMI1

Receive FIFO mailbox identifier register

Offset: 0x1C0, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SFID_EFID
r 		EFID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EFID
r 		FF
r 		FT
r
Toggle Fields.

FT

Bit 1: Frame type.

Allowed values:
0: Data: Data frame
1: Remote: Remote frame

FF

Bit 2: Frame format.

Allowed values:
0: Standard: Standard format frame
1: Extended: Extended format frame

EFID

Bits 3-20: The frame identifier.

SFID_EFID

Bits 21-31: The frame identifier.

RFIFOMP1

Receive FIFO mailbox property register

Offset: 0x1C4, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TS
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FI
r 		DLENC
r
Toggle Fields.

DLENC

Bits 0-3: Data length code.

Allowed values: 0-15

FI

Bits 8-15: Filtering index.

Allowed values: 0-255

TS

Bits 16-31: Time stamp.

Allowed values: 0-65535

RFIFOMDATA01

Receive FIFO mailbox data0 register

Offset: 0x1C8, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB3
r 		DB2
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB1
r 		DB0
r
Toggle Fields.

DB0

Bits 0-7: Data byte 0.

Allowed values: 0-255

DB1

Bits 8-15: Data byte 1.

Allowed values: 0-255

DB2

Bits 16-23: Data byte 2.

Allowed values: 0-255

DB3

Bits 24-31: Data byte 3.

Allowed values: 0-255

RFIFOMDATA11

Receive FIFO mailbox data1 register

Offset: 0x1CC, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DB7
r 		DB6
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DB5
r 		DB4
r
Toggle Fields.

DB4

Bits 0-7: Data byte 4.

Allowed values: 0-255

DB5

Bits 8-15: Data byte 5.

Allowed values: 0-255

DB6

Bits 16-23: Data byte 6.

Allowed values: 0-255

DB7

Bits 24-31: Data byte 7.

Allowed values: 0-255

FCTL

Filter control register

Offset: 0x200, reset: 0x2A1C0E01, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HBC1F
rw 		FLD
rw
Toggle Fields.

FLD

Bit 0: Filter lock disable.

Allowed values:
0: Disabled: Filter lock disabled
1: Enabled: Filter lock enabled

HBC1F

Bits 8-13: Header bank of CAN1 filter.

Allowed values: 0-28

FMCFG

Filter mode configuration register

Offset: 0x204, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FMOD27
rw 		FMOD26
rw 		FMOD25
rw 		FMOD24
rw 		FMOD23
rw 		FMOD22
rw 		FMOD21
rw 		FMOD20
rw 		FMOD19
rw 		FMOD18
rw 		FMOD17
rw 		FMOD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FMOD15
rw 		FMOD14
rw 		FMOD13
rw 		FMOD12
rw 		FMOD11
rw 		FMOD10
rw 		FMOD9
rw 		FMOD8
rw 		FMOD7
rw 		FMOD6
rw 		FMOD5
rw 		FMOD4
rw 		FMOD3
rw 		FMOD2
rw 		FMOD1
rw 		FMOD0
rw
Toggle Fields.

FMOD0

Bit 0: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD1

Bit 1: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD2

Bit 2: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD3

Bit 3: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD4

Bit 4: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD5

Bit 5: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD6

Bit 6: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD7

Bit 7: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD8

Bit 8: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD9

Bit 9: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD10

Bit 10: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD11

Bit 11: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD12

Bit 12: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD13

Bit 13: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD14

Bit 14: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD15

Bit 15: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD16

Bit 16: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD17

Bit 17: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD18

Bit 18: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD19

Bit 19: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD20

Bit 20: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD21

Bit 21: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD22

Bit 22: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD23

Bit 23: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD24

Bit 24: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD25

Bit 25: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD26

Bit 26: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FMOD27

Bit 27: Filter mode.

Allowed values:
0: Mask: Mask mode
1: List: List mode

FSCFG

Filter scale configuration register

Offset: 0x20C, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FS27
rw 		FS26
rw 		FS25
rw 		FS24
rw 		FS23
rw 		FS22
rw 		FS21
rw 		FS20
rw 		FS19
rw 		FS18
rw 		FS17
rw 		FS16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FS15
rw 		FS14
rw 		FS13
rw 		FS12
rw 		FS11
rw 		FS10
rw 		FS9
rw 		FS8
rw 		FS7
rw 		FS6
rw 		FS5
rw 		FS4
rw 		FS3
rw 		FS2
rw 		FS1
rw 		FS0
rw
Toggle Fields.

FS0

Bit 0: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS1

Bit 1: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS2

Bit 2: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS3

Bit 3: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS4

Bit 4: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS5

Bit 5: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS6

Bit 6: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS7

Bit 7: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS8

Bit 8: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS9

Bit 9: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS10

Bit 10: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS11

Bit 11: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS12

Bit 12: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS13

Bit 13: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS14

Bit 14: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS15

Bit 15: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS16

Bit 16: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS17

Bit 17: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS18

Bit 18: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS19

Bit 19: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS20

Bit 20: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS21

Bit 21: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS22

Bit 22: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS23

Bit 23: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS24

Bit 24: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS25

Bit 25: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS26

Bit 26: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FS27

Bit 27: Filter scale .

Allowed values:
0: Scale16: Filter with 16-bit scale
1: Scale32: Filter with 32-bit scale

FAFIFO

Filter associated FIFO register

Offset: 0x214, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FAF27
rw 		FAF26
rw 		FAF25
rw 		FAF24
rw 		FAF23
rw 		FAF22
rw 		FAF21
rw 		FAF20
rw 		FAF19
rw 		FAF18
rw 		FAF17
rw 		FAF16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FAF15
rw 		FAF14
rw 		FAF13
rw 		FAF12
rw 		FAF11
rw 		FAF10
rw 		FAF9
rw 		FAF8
rw 		FAF7
rw 		FAF6
rw 		FAF5
rw 		FAF4
rw 		FAF3
rw 		FAF2
rw 		FAF1
rw 		FAF0
rw
Toggle Fields.

FAF0

Bit 0: Filter 0 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF1

Bit 1: Filter 1 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF2

Bit 2: Filter 2 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF3

Bit 3: Filter 3 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF4

Bit 4: Filter 4 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF5

Bit 5: Filter 5 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF6

Bit 6: Filter 6 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF7

Bit 7: Filter 7 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF8

Bit 8: Filter 8 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF9

Bit 9: Filter 9 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF10

Bit 10: Filter 10 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF11

Bit 11: Filter 11 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF12

Bit 12: Filter 12 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF13

Bit 13: Filter 13 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF14

Bit 14: Filter 14 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF15

Bit 15: Filter 15 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF16

Bit 16: Filter 16 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF17

Bit 17: Filter 17 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF18

Bit 18: Filter 18 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF19

Bit 19: Filter 19 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF20

Bit 20: Filter 20 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF21

Bit 21: Filter 21 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF22

Bit 22: Filter 22 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF23

Bit 23: Filter 23 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF24

Bit 24: Filter 24 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF25

Bit 25: Filter 25 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF26

Bit 26: Filter 26 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FAF27

Bit 27: Filter 27 associated FIFO.

Allowed values:
0: FIFO0: Filter associated with FIFO0
1: FIFO1: Filter associated with FIFO1

FW

Filter working register

Offset: 0x21C, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FW27
rw 		FW26
rw 		FW25
rw 		FW24
rw 		FW23
rw 		FW22
rw 		FW21
rw 		FW20
rw 		FW19
rw 		FW18
rw 		FW17
rw 		FW16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FW15
rw 		FW14
rw 		FW13
rw 		FW12
rw 		FW11
rw 		FW10
rw 		FW9
rw 		FW8
rw 		FW7
rw 		FW6
rw 		FW5
rw 		FW4
rw 		FW3
rw 		FW2
rw 		FW1
rw 		FW0
rw
Toggle Fields.

FW0

Bit 0: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW1

Bit 1: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW2

Bit 2: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW3

Bit 3: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW4

Bit 4: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW5

Bit 5: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW6

Bit 6: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW7

Bit 7: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW8

Bit 8: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW9

Bit 9: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW10

Bit 10: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW11

Bit 11: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW12

Bit 12: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW13

Bit 13: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW14

Bit 14: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW15

Bit 15: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW16

Bit 16: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW17

Bit 17: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW18

Bit 18: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW19

Bit 19: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW20

Bit 20: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW21

Bit 21: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW22

Bit 22: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW23

Bit 23: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW24

Bit 24: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW25

Bit 25: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW26

Bit 26: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

FW27

Bit 27: Filter working.

Allowed values:
0: Disabled: Filter working disabled
1: Enabled: Filter working enabled

F0DATA0

Filter 0 data 0 register

Offset: 0x240, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F0DATA1

Filter 0 data 1 register

Offset: 0x244, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F1DATA0

Filter 1 data 0 register

Offset: 0x248, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F1DATA1

Filter 1 data 1 register

Offset: 0x24C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F2DATA0

Filter 2 data 0 register

Offset: 0x250, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F2DATA1

Filter 2 data 1 register

Offset: 0x254, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F3DATA0

Filter 3 data 0 register

Offset: 0x258, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F3DATA1

Filter 3 data 1 register

Offset: 0x25C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F4DATA0

Filter 4 data 0 register

Offset: 0x260, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F4DATA1

Filter 4 data 1 register

Offset: 0x264, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F5DATA0

Filter 5 data 0 register

Offset: 0x268, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F5DATA1

Filter 5 data 1 register

Offset: 0x26C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F6DATA0

Filter 6 data 0 register

Offset: 0x270, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F6DATA1

Filter 6 data 1 register

Offset: 0x274, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F7DATA0

Filter 7 data 0 register

Offset: 0x278, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F7DATA1

Filter 7 data 1 register

Offset: 0x27C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F8DATA0

Filter 8 data 0 register

Offset: 0x280, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F8DATA1

Filter 8 data 1 register

Offset: 0x284, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F9DATA0

Filter 9 data 0 register

Offset: 0x288, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F9DATA1

Filter 9 data 1 register

Offset: 0x28C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F10DATA0

Filter 10 data 0 register

Offset: 0x290, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F10DATA1

Filter 10 data 1 register

Offset: 0x294, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F11DATA0

Filter 11 data 0 register

Offset: 0x298, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F11DATA1

Filter 11 data 1 register

Offset: 0x29C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F12DATA0

Filter 12 data 0 register

Offset: 0x2A0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F12DATA1

Filter 12 data 1 register

Offset: 0x2A4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F13DATA0

Filter 13 data 0 register

Offset: 0x2A8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F13DATA1

Filter 13 data 1 register

Offset: 0x2AC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F14DATA0

Filter 14 data 0 register

Offset: 0x2B0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F14DATA1

Filter 14 data 1 register

Offset: 0x2B4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F15DATA0

Filter 15 data 0 register

Offset: 0x2B8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F15DATA1

Filter 15 data 1 register

Offset: 0x2BC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F16DATA0

Filter 16 data 0 register

Offset: 0x2C0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F16DATA1

Filter 16 data 1 register

Offset: 0x2C4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F17DATA0

Filter 17 data 0 register

Offset: 0x2C8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F17DATA1

Filter 17 data 1 register

Offset: 0x2CC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F18DATA0

Filter 18 data 0 register

Offset: 0x2D0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F18DATA1

Filter 18 data 1 register

Offset: 0x2D4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F19DATA0

Filter 19 data 0 register

Offset: 0x2D8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F19DATA1

Filter 19 data 1 register

Offset: 0x2DC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F20DATA0

Filter 20 data 0 register

Offset: 0x2E0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F20DATA1

Filter 20 data 1 register

Offset: 0x2E4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F21DATA0

Filter 21 data 0 register

Offset: 0x2E8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F21DATA1

Filter 21 data 1 register

Offset: 0x2EC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F22DATA0

Filter 22 data 0 register

Offset: 0x2F0, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F22DATA1

Filter 22 data 1 register

Offset: 0x2F4, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F23DATA0

Filter 23 data 0 register

Offset: 0x2F8, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F23DATA1

Filter 23 data 1 register

Offset: 0x2FC, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F24DATA0

Filter 24 data 0 register

Offset: 0x300, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F24DATA1

Filter 24 data 1 register

Offset: 0x304, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F25DATA0

Filter 25 data 0 register

Offset: 0x308, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F25DATA1

Filter 25 data 1 register

Offset: 0x30C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F26DATA0

Filter 26 data 0 register

Offset: 0x310, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F26DATA1

Filter 26 data 1 register

Offset: 0x314, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F27DATA0

Filter 27 data 0 register

Offset: 0x318, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

F27DATA1

Filter 27 data 1 register

Offset: 0x31C, reset: 0x00000000, access: read-write

0/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FD31
rw 		FD30
rw 		FD29
rw 		FD28
rw 		FD27
rw 		FD26
rw 		FD25
rw 		FD24
rw 		FD23
rw 		FD22
rw 		FD21
rw 		FD20
rw 		FD19
rw 		FD18
rw 		FD17
rw 		FD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FD15
rw 		FD14
rw 		FD13
rw 		FD12
rw 		FD11
rw 		FD10
rw 		FD9
rw 		FD8
rw 		FD7
rw 		FD6
rw 		FD5
rw 		FD4
rw 		FD3
rw 		FD2
rw 		FD1
rw 		FD0
rw
Toggle Fields.

FD0

Bit 0: Filter data.

FD1

Bit 1: Filter data.

FD2

Bit 2: Filter data.

FD3

Bit 3: Filter data.

FD4

Bit 4: Filter data.

FD5

Bit 5: Filter data.

FD6

Bit 6: Filter data.

FD7

Bit 7: Filter data.

FD8

Bit 8: Filter data.

FD9

Bit 9: Filter data.

FD10

Bit 10: Filter data.

FD11

Bit 11: Filter data.

FD12

Bit 12: Filter data.

FD13

Bit 13: Filter data.

FD14

Bit 14: Filter data.

FD15

Bit 15: Filter data.

FD16

Bit 16: Filter data.

FD17

Bit 17: Filter data.

FD18

Bit 18: Filter data.

FD19

Bit 19: Filter data.

FD20

Bit 20: Filter data.

FD21

Bit 21: Filter data.

FD22

Bit 22: Filter data.

FD23

Bit 23: Filter data.

FD24

Bit 24: Filter data.

FD25

Bit 25: Filter data.

FD26

Bit 26: Filter data.

FD27

Bit 27: Filter data.

FD28

Bit 28: Filter data.

FD29

Bit 29: Filter data.

FD30

Bit 30: Filter data.

FD31

Bit 31: Filter data.

PHYCTL

PHY control register

Offset: 0x3FC, reset: 0x00000300, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POMOD
r 		PHYEN
r
Toggle Fields.

PHYEN

Bit 0: PHY enable bit.

Allowed values:
0: Disabled: CAN PHY disabled
1: Enabled: CAN PHY enabled

POMOD

Bits 8-9: CAN PHY output driver control.

Allowed values:
0: LowSlope: Low slope mode
1: MiddleSlope: Middle slope mode
2: HighSlope: High slope mode
3: HighSpeed: High speed mode

CEC

0x40007800: HDMI-CEC controller

1/40 fields covered. Toggle Registers.

CTL

control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ENDOM
rw 		SOM
rw 		CECEN
rw
Toggle Fields.

CECEN

Bit 0: Enable/disable HDMI-CEC controller.

SOM

Bit 1: Start of sending a message.

ENDOM

Bit 2: ENDOM bit value in the next frame in TX mode.

CFG

Configuration register

Offset: 0x4, reset: 0x00000000, access: read-write

0/9 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LMEN
rw 		OADR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SFTOPT
rw 		BCNG
rw 		RLBPEGEN
rw 		RBREGEN
rw 		RBRESTP
rw 		RTOL
rw 		SFT
rw
Toggle Fields.

SFT

Bits 0-2: Signal Free Time.

RTOL

Bit 3: Reception bit timing tolerance.

RBRESTP

Bit 4: Whether stop receive message when detected RBRE.

RBREGEN

Bit 5: Generate Error-bit when detected RBRE in singlecast.

RLBPEGEN

Bit 6: Generate Error-bit when detected RLBPE in singlecast.

BCNG

Bit 7: Do not generate Error-bit in broadcast message.

SFTOPT

Bit 8: The SFT start option.

OADR

Bits 16-30: Own Address.

LMEN

Bit 31: Listen mode enable.

TDATA

Transmit data register

Offset: 0x8, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXDATA
w
Toggle Fields.

TXDATA

Bits 0-7: Tx Data register.

RDATA

Rx Data Register

Offset: 0xC, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RXDATA
r
Toggle Fields.

RXDATA

Bits 0-7: CEC Rx Data Register.

INTF

Interrupt Flag Register

Offset: 0x10, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAERR
rw 		TERR
rw 		TU
rw 		TEND
rw 		TBR
rw 		LSTARB
rw 		RAE
rw 		RLBPE
rw 		RSBPE
rw 		RBRE
rw 		RO
rw 		REND
rw 		RBR
rw
Toggle Fields.

RBR

Bit 0: Rx-Byte data received.

REND

Bit 1: End of Reception.

RO

Bit 2: RX Overrun.

RBRE

Bit 3: Bit Rising Error.

RSBPE

Bit 4: Short Bit Period Error.

RLBPE

Bit 5: Long Bit Period Error.

RAE

Bit 6: Rx ACK Error.

LSTARB

Bit 7: Arbitration lost.

TBR

Bit 8: Tx-Byte data request.

TEND

Bit 9: Transmission successfully end.

TU

Bit 10: Tx data buffer underrun.

TERR

Bit 11: Tx-Error.

TAERR

Bit 12: Tx ACK Error flag.

INTEN

interrupt enable register

Offset: 0x14, reset: 0x00000000, access: read-write

0/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TAERRIE
rw 		TERRIE
rw 		TUIE
rw 		TXENDIE
rw 		TBRIE
rw 		LSTARBIE
rw 		RAEIE
rw 		RLBPEIE
rw 		RSBPEIE
rw 		RBREIE
rw 		ROIE
rw 		RENDIE
rw 		RBRIE
rw
Toggle Fields.

RBRIE

Bit 0: RBR Interrupt Enable.

RENDIE

Bit 1: REND Interrupt Enable.

ROIE

Bit 2: RO Interrupt Enable.

RBREIE

Bit 3: RBRE Interrupt Enable.

RSBPEIE

Bit 4: RSBPE Interrupt Enable.

RLBPEIE

Bit 5: RLBPE Interrupt Enable.

RAEIE

Bit 6: RAE Interrupt Enable.

LSTARBIE

Bit 7: ALRLST Interrupt Enable.

TBRIE

Bit 8: TBR Interrupt Enable.

TXENDIE

Bit 9: TEND Interrupt Enable.

TUIE

Bit 10: TU Interrupt Enable.

TERRIE

Bit 11: TERR Interrupt Enable.

TAERRIE

Bit 12: TAERR Interrupt Enable.

CMP

0x4001001C: Comparator

18/18 fields covered. Toggle Registers.

CS

control and status register

Offset: 0x0, reset: 0x00000000, access: Unspecified

18/18 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CMP1LK
rw 		CMP1O
r 		CMP1HST
rw 		CMP1PL
rw 		CMP1OSEL
rw 		WNDEN
rw 		CMP1MSEL
rw 		CMP1M
rw 		CMP1EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMP0LK
rw 		CMP0O
r 		CMP0HST
rw 		CMP0PL
rw 		CMP0OSEL
rw 		CMP0MSEL
rw 		CMP0M
rw 		CMP0SW
rw 		CMP0EN
rw
Toggle Fields.

CMP0EN

Bit 0: CMP0 enable.

Allowed values:
0: Disabled: Comparator disabled
1: Enabled: Comparator enabled

CMP0SW

Bit 1: CMP0 switch.

Allowed values:
0: Open: Switch open
1: Closed: Switch closed

CMP0M

Bits 2-3: CMP0 mode.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
2: LowSpeed: Low speed / low power
3: VeryLowSpeed: Very-low speed / ultra-low power

CMP0MSEL

Bits 4-6: CMP0_M input selection.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: PA4: PA4 (DAC0
5: PA5: PA5
6: PA0: PA0

CMP0OSEL

Bits 8-10: Comparator 0 output selection.

Allowed values:
0: NoSelection: No selection
1: Timer0BreakInput: Timer 0 break input
2: Timer0InputCapture0: Timer 0 Input capture 0
3: Timer0OCPREClearInput: Timer 0 OCPRE_CLR input
4: Timer1InputCapture3: Timer 1 input capture 3
5: Timer1OCPREClearInput: Timer 1 OCPRE_CLR input
6: Timer2InputCapture0: Timer 2 input capture 0
7: Timer2OCPREClearInput: Timer 2 OCPRE_CLR input

CMP0PL

Bit 11: Polarity of CMP0 output.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

CMP0HST

Bits 12-13: CMP0 hysteresis.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

CMP0O

Bit 14: CMP0 output.

Allowed values:
0: Low: Non-inverting input below inverting input
1: High: Non-inverting input above inverting input

CMP0LK

Bit 15: CMP0 lock.

Allowed values:
0: ReadWrite: Control bits are read-write
1: ReadOnly: Control bits are read-only

CMP1EN

Bit 16: CMP1 enable.

Allowed values:
0: Disabled: Comparator disabled
1: Enabled: Comparator enabled

CMP1M

Bits 18-19: CMP1 mode.

Allowed values:
0: HighSpeed: High speed / full power
1: MediumSpeed: Medium speed / medium power
2: LowSpeed: Low speed / low power
3: VeryLowSpeed: Very-low speed / ultra-low power

CMP1MSEL

Bits 20-22: CMP1_M input selection.

Allowed values:
0: OneQuarterVRef: 1/4 of VRefint
1: OneHalfVRef: 1/2 of VRefint
2: ThreeQuarterVRef: 3/4 of VRefint
3: VRef: VRefint
4: PA4: PA4 (DAC0
5: PA5: PA5
6: PA0: PA0

WNDEN

Bit 23: Window mode enable.

Allowed values:
0: Disabled: Window mode disabled
1: Enabled: Window mode enabled

CMP1OSEL

Bits 24-26: CMP1 output selection.

Allowed values:
0: NoSelection: No selection
1: Timer0BreakInput: Timer 0 break input
2: Timer0InputCapture0: Timer 0 Input capture 0
3: Timer0OCPREClearInput: Timer 0 OCPRE_CLR input
4: Timer1InputCapture3: Timer 1 input capture 3
5: Timer1OCPREClearInput: Timer 1 OCPRE_CLR input
6: Timer2InputCapture0: Timer 2 input capture 0
7: Timer2OCPREClearInput: Timer 2 OCPRE_CLR input

CMP1PL

Bit 27: Polarity of CMP1 output.

Allowed values:
0: NotInverted: Output is not inverted
1: Inverted: Output is inverted

CMP1HST

Bits 28-29: CMP1 hysteresis.

Allowed values:
0: NoHysteresis: No hysteresis
1: LowHysteresis: Low hysteresis
2: MediumHysteresis: Medium hysteresis
3: HighHysteresis: High hysteresis

CMP1O

Bit 30: CMP1 output.

Allowed values:
0: Low: Non-inverting input below inverting input
1: High: Non-inverting input above inverting input

CMP1LK

Bit 31: CMP1 lock.

Allowed values:
0: ReadWrite: Control bits are read-write
1: ReadOnly: Control bits are read-only

CRC

0x40023000: cyclic redundancy check calculation unit

6/6 fields covered. Toggle Registers.

DATA

Data register

Offset: 0x0, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: CRC calculation result.

Allowed values: 0-4294967295

FDATA

Free data register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FDATA
rw
Toggle Fields.

FDATA

Bits 0-7: Free Data Register bits.

Allowed values: 0-255

CTL

Control register

Offset: 0x8, reset: 0x00000000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
REV_O
rw 		REV_I
rw 		RST
rw
Toggle Fields.

RST

Bit 0: reset bit.

Allowed values:
1: Reset: Resets the DATA register to IDATA, with no effect on FDATA

REV_I

Bits 5-6: Input Data Reverse Function.

Allowed values:
0: Normal: Bit order not affected
1: Byte: Bit reversal done by byte
2: HalfWord: Bit reversal done by half-word
3: Word: Bit reversal done by word

REV_O

Bit 7: Output Data Reverse Function.

Allowed values:
0: Normal: Bit order not affected
1: Reversed: Bit reversed output

IDATA

Initial CRC value

Offset: 0x10, reset: 0xFFFFFFFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IDATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IDATA
rw
Toggle Fields.

IDATA

Bits 0-31: Configurable initial CRC data value.

Allowed values: 0-4294967295

DAC

0x40007400: Digital-to-analog converter

30/30 fields covered. Toggle Registers.

CTL

control register

Offset: 0x0, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DDUDRIE1
rw 		DDMAEN1
rw 		DTSEL1
rw 		DTEN1
rw 		DBOFF1
rw 		DEN1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DDUDRIE0
rw 		DDMAEN0
rw 		DTSEL0
rw 		DTEN0
rw 		DBOFF0
rw 		DEN0
rw
Toggle Fields.

DEN0

Bit 0: DAC0 enable.

Allowed values:
0: Disabled: DAC channel disabled
1: Enabled: DAC channel enabled

DBOFF0

Bit 1: DAC0 output buffer turn off.

Allowed values:
0: Enabled: DAC X output buffer enabled
1: Disabled: DAC X output buffer disabled

DTEN0

Bit 2: DAC0 trigger enable.

Allowed values:
0: Disabled: DAC trigger disabled
1: Enabled: DAC trigger enabled

DTSEL0

Bits 3-5: DAC0 trigger selection.

Allowed values:
0: TIMER5_TRGO: Timer 5 TRGO event
1: TIMER2_TRGO: Timer 2 TRGO event
3: TIMER14_TRGO: Timer 14 TRGO event
4: TIMER1_TRGO: Timer 1 TRGO event
6: EXTERNAL9: External line9
7: SOFTWARE: Software trigger

DDMAEN0

Bit 12: DAC0 DMA enable.

Allowed values:
0: Disabled: DAC DMA mode disabled
1: Enabled: DAC DMA mode enabled

DDUDRIE0

Bit 13: DAC0 DMA Underrun Interrupt enable.

Allowed values:
0: Disabled: DAC DMA Underrun Interrupt disabled
1: Enabled: DAC DMA Underrun Interrupt enabled

DEN1

Bit 16: DAC1 enable.

Allowed values:
0: Disabled: DAC channel disabled
1: Enabled: DAC channel enabled

DBOFF1

Bit 17: DAC1 output buffer turn off.

Allowed values:
0: Enabled: DAC X output buffer enabled
1: Disabled: DAC X output buffer disabled

DTEN1

Bit 18: DAC1 trigger enable.

Allowed values:
0: Disabled: DAC trigger disabled
1: Enabled: DAC trigger enabled

DTSEL1

Bits 19-21: DAC1 trigger selection.

Allowed values:
0: TIMER5_TRGO: Timer 5 TRGO event
1: TIMER2_TRGO: Timer 2 TRGO event
3: TIMER14_TRGO: Timer 14 TRGO event
4: TIMER1_TRGO: Timer 1 TRGO event
6: EXTERNAL9: External line9
7: SOFTWARE: Software trigger

DDMAEN1

Bit 28: DAC1 DMA enable.

Allowed values:
0: Disabled: DAC DMA mode disabled
1: Enabled: DAC DMA mode enabled

DDUDRIE1

Bit 29: DAC1 DMA Underrun Interrupt enable.

Allowed values:
0: Disabled: DAC DMA Underrun Interrupt disabled
1: Enabled: DAC DMA Underrun Interrupt enabled

SWT

software trigger register

Offset: 0x4, reset: 0x00000000, access: write-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWTR1
w 		SWTR0
w
Toggle Fields.

SWTR0

Bit 0: DAC0 software trigger.

Allowed values:
0: Disabled: DAC channel X software trigger disabled
1: Enabled: DAC channel X software trigger enabled

SWTR1

Bit 1: DAC1 software trigger.

Allowed values:
0: Disabled: DAC channel X software trigger disabled
1: Enabled: DAC channel X software trigger enabled

DAC0_R12DH

DAC0 12-bit right-aligned data holding register

Offset: 0x8, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 0-11: DAC0 12-bit right-aligned data.

Allowed values: 0-4095

DAC0_L12DH

DAC0 12-bit left aligned data holding register

Offset: 0xC, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 4-15: DAC0 12-bit left-aligned data.

Allowed values: 0-4095

DAC0_R8DH

DAC0 8-bit right aligned data holding register

Offset: 0x10, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 0-7: DAC0 8-bit right-aligned data.

Allowed values: 0-255

DAC1_R12DH

DAC1 12-bit right-aligned data holding register

Offset: 0x14, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC1_DH
rw
Toggle Fields.

DAC1_DH

Bits 0-11: DAC1 12-bit right-aligned data.

Allowed values: 0-4095

DAC1_L12DH

DAC1 12-bit left aligned data holding register

Offset: 0x18, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC1_DH
rw
Toggle Fields.

DAC1_DH

Bits 4-15: DAC1 12-bit left-aligned data.

Allowed values: 0-4095

DAC1_R8DH

DAC1 8-bit right aligned data holding register

Offset: 0x1C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC1_DH
rw
Toggle Fields.

DAC1_DH

Bits 0-7: DAC1 8-bit right-aligned data.

Allowed values: 0-255

DACC_R12DH

DAC concurrent mode 12-bit right-aligned data holding register

Offset: 0x20, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DAC1_DH
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 0-11: DAC0 12-bit right-aligned data.

Allowed values: 0-4095

DAC1_DH

Bits 16-27: DAC1 12-bit right-aligned data.

Allowed values: 0-4095

DACC_L12DH

DAC concurrent mode 12-bit left aligned data holding register

Offset: 0x24, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DAC1_DH
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 4-15: DAC0 12-bit left-aligned data.

Allowed values: 0-4095

DAC1_DH

Bits 20-31: DAC1 12-bit left-aligned data.

Allowed values: 0-4095

DACC_R8DH

DAC concurrent mode 8-bit right aligned data holding register

Offset: 0x28, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC1_DH
rw 		DAC0_DH
rw
Toggle Fields.

DAC0_DH

Bits 0-7: DAC0 8-bit right-aligned data.

Allowed values: 0-255

DAC1_DH

Bits 8-15: DAC1 8-bit right-aligned data.

Allowed values: 0-255

DAC0_DO

DAC0 data output register

Offset: 0x2C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC0_DO
r
Toggle Fields.

DAC0_DO

Bits 0-11: DAC0 output data.

Allowed values: 0-4095

DAC1_DO

DAC1 data output register

Offset: 0x30, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DAC1_DO
r
Toggle Fields.

DAC1_DO

Bits 0-11: DAC1 output data.

Allowed values: 0-4095

STAT

status register

Offset: 0x34, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DDUDR1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DDUDR0
rw
Toggle Fields.

DDUDR0

Bit 13: DAC0 DMA underrun flag.

Allowed values:
0: NoUnderrun: No DMA underrun error condition occurred
1: Underrun: DMA underrun error condition occurred

DDUDR1

Bit 29: DAC1 DMA underrun flag.

Allowed values:
0: NoUnderrun: No DMA underrun error condition occurred
1: Underrun: DMA underrun error condition occurred

DBG

0xE0042000: Debug support

20/20 fields covered. Toggle Registers.

ID

MCU Device ID Code Register

Offset: 0x0, reset: 0x0, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ID_CODE
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ID_CODE
r
Toggle Fields.

ID_CODE

Bits 0-31: DBG ID code register.

Allowed values: 0-4294967295

CTL0

Debug Control Register 0

Offset: 0x4, reset: 0x0, access: read-write

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIMER13_HOLD
rw 		CAN1_HOLD
rw 		TIMER5_HOLD
rw 		I2C2_HOLD
rw 		I2C1_HOLD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2C0_HOLD
rw 		CAN0_HOLD
rw 		TIMER2_HOLD
rw 		TIMER1_HOLD
rw 		TIMER0_HOLD
rw 		WWDGT_HOLD
rw 		FWDGT_HOLD
rw 		STB_HOLD
rw 		DSLP_HOLD
rw 		SLP_HOLD
rw
Toggle Fields.

SLP_HOLD

Bit 0: Sleep mode hold register.

Allowed values:
0: Disabled: No effect
1: Enabled: In sleep mode the AHB clock is on

DSLP_HOLD

Bit 1: Deep-sleep mode hold register.

Allowed values:
0: Disabled: No effect
1: Enabled: In deep-sleep mode the AHB clock and system clock are provided by IRC8M

STB_HOLD

Bit 2: Standby mode hold register.

Allowed values:
0: Disabled: No effect
1: Enabled: In standby mode the AHB clock and system clock are provided by IRC8M

FWDGT_HOLD

Bit 8: FWDGT hold register.

Allowed values:
0: Continue: Continue running the watchdog timer as usual
1: Stop: Hold the watchdog timer for debug when the core is halted

WWDGT_HOLD

Bit 9: WWDGT hold register.

Allowed values:
0: Continue: Continue running the watchdog timer as usual
1: Stop: Hold the watchdog timer for debug when the core is halted

TIMER0_HOLD

Bit 10: Timer 0 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

TIMER1_HOLD

Bit 11: Timer 1 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

TIMER2_HOLD

Bit 12: Timer 2 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

CAN0_HOLD

Bit 14: CAN 0 hold register.

Allowed values:
0: Continue: Continue running CAN as usual
1: Stop: Hold the CAN for debug when the core is halted

I2C0_HOLD

Bit 15: I2C0 hold register.

Allowed values:
0: Continue: Continue running I2C as usual
1: Stop: Hold the I2C timeout for debug when the core is halted

I2C1_HOLD

Bit 16: I2C1 hold register.

Allowed values:
0: Continue: Continue running I2C as usual
1: Stop: Hold the I2C timeout for debug when the core is halted

I2C2_HOLD

Bit 17: I2C2 hold register.

Allowed values:
0: Continue: Continue running I2C as usual
1: Stop: Hold the I2C timeout for debug when the core is halted

TIMER5_HOLD

Bit 19: Timer 5 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

CAN1_HOLD

Bit 21: CAN1 hold register.

Allowed values:
0: Continue: Continue running CAN as usual
1: Stop: Hold the CAN for debug when the core is halted

TIMER13_HOLD

Bit 27: Timer 13 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

CTL1

Debug Control Register 1

Offset: 0x8, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIMER16_HOLD
rw 		TIMER15_HOLD
rw 		TIMER14_HOLD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTC_HOLD
rw
Toggle Fields.

RTC_HOLD

Bit 10: RTC hold register.

Allowed values:
0: Continue: Continue running the RTC as usual
1: Stop: Hold the RTC for debug when the core is halted

TIMER14_HOLD

Bit 16: Timer 14 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

TIMER15_HOLD

Bit 17: Timer 15 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

TIMER16_HOLD

Bit 18: Timer 16 hold register.

Allowed values:
0: Continue: Continue running the timer as usual
1: Stop: Hold the timer counter for debug when the core is halted

DMA

0x40020000: DMA controller

147/161 fields covered. Toggle Registers.

INTF

DMA interrupt flag register (DMA_INTF)

Offset: 0x0, reset: 0x00000000, access: read-only

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ERRIF6
r 		HTFIF6
r 		FTFIF6
r 		GIF6
r 		ERRIF5
r 		HTFIF5
r 		FTFIF5
r 		GIF5
r 		ERRIF4
r 		HTFIF4
r 		FTFIF4
r 		GIF4
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRIF3
r 		HTFIF3
r 		FTFIF3
r 		GIF3
r 		ERRIF2
r 		HTFIF2
r 		FTFIF2
r 		GIF2
r 		ERRIF1
r 		HTFIF1
r 		FTFIF1
r 		GIF1
r 		ERRIF0
r 		HTFIF0
r 		FTFIF0
r 		GIF0
r
Toggle Fields.

GIF0

Bit 0: Global interrupt flag of channel 0.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF0

Bit 1: Full transfer finish flag of channel 0.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF0

Bit 2: Half transfer finish flag of channel 0.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF0

Bit 3: Transfer access error flag of channel 0.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF1

Bit 4: Global interrupt flag of channel 1.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF1

Bit 5: Full transfer finish flag of channel 1.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF1

Bit 6: Half transfer finish flag of channel 1.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF1

Bit 7: Transfer access error flag of channel 1.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF2

Bit 8: Global interrupt flag of channel 2.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF2

Bit 9: Full transfer finish flag of channel 2.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF2

Bit 10: Half transfer finish flag of channel 2.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF2

Bit 11: Transfer access error flag of channel 2.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF3

Bit 12: Global interrupt flag of channel 3.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF3

Bit 13: Full transfer finish flag of channel 3.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF3

Bit 14: Half transfer finish flag of channel 3.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF3

Bit 15: Transfer access error flag of channel 3.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF4

Bit 16: Global interrupt flag of channel 4.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF4

Bit 17: Full transfer finish flag of channel 4.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF4

Bit 18: Half transfer finish flag of channel 4.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF4

Bit 19: Transfer access error flag of channel 4.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF5

Bit 20: Global interrupt flag of channel 5.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF5

Bit 21: Full transfer finish flag of channel 5.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF5

Bit 22: Half transfer finish flag of channel 5.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF5

Bit 23: Transfer access error flag of channel 5.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

GIF6

Bit 24: Global interrupt flag of channel 6.

Allowed values:
0: NoEvent: No transfer error, half event, complete event
1: Event: A transfer error, half event or complete event has occured

FTFIF6

Bit 25: Full transfer finish flag of channel 6.

Allowed values:
0: NotComplete: No transfer complete event
1: Complete: A transfer complete event has occured

HTFIF6

Bit 26: Half transfer finish flag of channel 6.

Allowed values:
0: NotHalf: No half transfer event
1: Half: A half transfer event has occured

ERRIF6

Bit 27: Transfer access error flag of channel 6.

Allowed values:
0: NoError: No transfer error
1: Error: A transfer error has occured

INTC

DMA interrupt flag clear register (DMA_INTC)

Offset: 0x4, reset: 0x00000000, access: write-only

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ERRIFC6
w 		HTFIFC6
w 		FTFIFC6
w 		GIFC6
w 		ERRIFC5
w 		HTFIFC5
w 		FTFIFC5
w 		GIFC5
w 		ERRIFC4
w 		HTFIFC4
w 		FTFIFC4
w 		GIFC4
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ERRIFC3
w 		HTFIFC3
w 		FTFIFC3
w 		GIFC3
w 		ERRIFC2
w 		HTFIFC2
w 		FTFIFC2
w 		GIFC2
w 		ERRIFC1
w 		HTFIFC1
w 		FTFIFC1
w 		GIFC1
w 		ERRIFC0
w 		HTFIFC0
w 		FTFIFC0
w 		GIFC0
w
Toggle Fields.

GIFC0

Bit 0: Clear global interrupt flag of channel 0.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC0

Bit 1: Clear bit for Full transfer finish flag of channel 0.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC0

Bit 2: Clear bit for half transfer finish flag of channel 0.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC0

Bit 3: Clear bit for transfer access error flag of channel 0.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC1

Bit 4: Clear global interrupt flag of channel 1.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC1

Bit 5: Clear bit for Full transfer finish flag of channel 1.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC1

Bit 6: Clear bit for half transfer finish flag of channel 1.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC1

Bit 7: Clear bit for transfer access error flag of channel 1.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC2

Bit 8: Clear global interrupt flag of channel 2.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC2

Bit 9: Clear bit for Full transfer finish flag of channel 2.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC2

Bit 10: Clear bit for half transfer finish flag of channel 2.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC2

Bit 11: Clear bit for transfer access error flag of channel 2.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC3

Bit 12: Clear global interrupt flag of channel 3.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC3

Bit 13: Clear bit for Full transfer finish flag of channel 3.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC3

Bit 14: Clear bit for half transfer finish flag of channel 3.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC3

Bit 15: Clear bit for transfer access error flag of channel 3.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC4

Bit 16: Clear global interrupt flag of channel 4.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC4

Bit 17: Clear bit for Full transfer finish flag of channel 4.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC4

Bit 18: Clear bit for half transfer finish flag of channel 4.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC4

Bit 19: Clear bit for transfer access error flag of channel 4.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC5

Bit 20: Clear global interrupt flag of channel 5.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC5

Bit 21: Clear bit for Full transfer finish flag of channel 5.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC5

Bit 22: Clear bit for half transfer finish flag of channel 5.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC5

Bit 23: Clear bit for transfer access error flag of channel 5.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

GIFC6

Bit 24: Clear global interrupt flag of channel 6.

Allowed values:
1: Clear: Clears the GIF flag in INTF

FTFIFC6

Bit 25: Clear bit for Full transfer finish flag of channel 6.

Allowed values:
1: Clear: Clears the FDFIF flag in INTF

HTFIFC6

Bit 26: Clear bit for half transfer finish flag of channel 6.

Allowed values:
1: Clear: Clears the HTFIF flag in INTF

ERRIFC6

Bit 27: Clear bit for transfer access error flag of channel 6.

Allowed values:
1: Clear: Clears the ERRIF flag in INTF

CH0CTL

DMA channel configuration register (DMA_CH0CTL0)

Offset: 0x8, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH0CNT

DMA channel 0 counter register

Offset: 0xC, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH0PADDR

DMA channel 0 peripheral base address register

Offset: 0x10, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH0MADDR

DMA channel 0 memory base address register

Offset: 0x14, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH1CTL

DMA channel configuration register (DMA_CH1CTL0)

Offset: 0x1C, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH1CNT

DMA channel 1 counter register

Offset: 0x20, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH1PADDR

DMA channel 1 peripheral base address register

Offset: 0x24, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH1MADDR

DMA channel 1 memory base address register

Offset: 0x28, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH2CTL

DMA channel configuration register (DMA_CH2CTL0)

Offset: 0x30, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH2CNT

DMA channel 2 counter register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH2PADDR

DMA channel 2 peripheral base address register

Offset: 0x38, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH2MADDR

DMA channel 2 memory base address register

Offset: 0x3C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH3CTL

DMA channel configuration register (DMA_CH3CTL0)

Offset: 0x44, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH3CNT

DMA channel 3 counter register

Offset: 0x48, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH3PADDR

DMA channel 3 peripheral base address register

Offset: 0x4C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH3MADDR

DMA channel 3 memory base address register

Offset: 0x50, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH4CTL

DMA channel configuration register (DMA_CH4CTL0)

Offset: 0x58, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH4CNT

DMA channel 4 counter register

Offset: 0x5C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH4PADDR

DMA channel 4 peripheral base address register

Offset: 0x60, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH4MADDR

DMA channel 4 memory base address register

Offset: 0x64, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH5CTL

DMA channel configuration register (DMA_CH5CTL0)

Offset: 0x6C, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for half transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH5CNT

DMA channel 5 counter register

Offset: 0x70, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH5PADDR

DMA channel 5 peripheral base address register

Offset: 0x74, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH5MADDR

DMA channel 5 memory base address register

Offset: 0x78, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

CH6CTL

DMA channel configuration register (DMA_CH6CTL0)

Offset: 0x80, reset: 0x00000000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
M2M
rw 		PRIO
rw 		MWIDTH
rw 		PWIDTH
rw 		MNAGA
rw 		PNAGA
rw 		CMEN
rw 		DIR
rw 		ERRIE
rw 		HTFIE
rw 		FTFIE
rw 		CHEN
rw
Toggle Fields.

CHEN

Bit 0: Channel enable.

Allowed values:
0: Disabled: Channel disabled
1: Enabled: Channel enabled

FTFIE

Bit 1: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Full transfer interrupt disabled
1: Enabled: Full transfer interrupt enabled

HTFIE

Bit 2: Enable bit for full transfer finish interrupt.

Allowed values:
0: Disabled: Half transfer interrupt disabled
1: Enabled: Half transfer interrupt enabled

ERRIE

Bit 3: Enable bit for tranfer access error interrupt.

Allowed values:
0: Disabled: Transfer error interrupt disabled
1: Enabled: Transfer error interrupt enabled

DIR

Bit 4: Transfer mode.

Allowed values:
0: FromPeripheral: Read from peripheral
1: FromMemory: Read from memory

CMEN

Bit 5: Circular mode enable.

Allowed values:
0: Disabled: Circular buffer disabled
1: Enabled: Circular buffer enabled

PNAGA

Bit 6: Next address generation algorithm of peripheral.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

MNAGA

Bit 7: Next address generation algorithm of memory.

Allowed values:
0: Fixed: Fixed address mode
1: Increment: Increment address mode

PWIDTH

Bits 8-9: Transfer data size of peripheral.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

MWIDTH

Bits 10-11: Transfer data size of memory.

Allowed values:
0: Bits8: 8-bit size
1: Bits16: 16-bit size
2: Bits32: 32-bit size

PRIO

Bits 12-13: Priority Level of this channel.

Allowed values:
0: Low: Low priority
1: Medium: Medium priority
2: High: High priority
3: VeryHigh: Very high priority

M2M

Bit 14: Memory to memory mode.

Allowed values:
0: Disabled: Memory to memory mode disabled
1: Enabled: Memory to memory mode enabled

CH6CNT

DMA channel 6 counter register

Offset: 0x84, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: Transfer counter.

Allowed values: 0-65535

CH6PADDR

DMA channel 6 peripheral base address register

Offset: 0x88, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PADDR
rw
Toggle Fields.

PADDR

Bits 0-31: Peripheral base address.

CH6MADDR

DMA channel 6 memory base address register

Offset: 0x8C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MADDR
rw
Toggle Fields.

MADDR

Bits 0-31: Memory base address.

EXTI

0x40010400: External interrupt/event controller

144/144 fields covered. Toggle Registers.

INTEN

Interrupt enable register (EXTI_INTEN)

Offset: 0x0, reset: 0x0F900000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
INTEN27
rw 		INTEN26
rw 		INTEN25
rw 		INTEN24
rw 		INTEN23
rw 		INTEN22
rw 		INTEN21
rw 		INTEN20
rw 		INTEN19
rw 		INTEN18
rw 		INTEN17
rw 		INTEN16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTEN15
rw 		INTEN14
rw 		INTEN13
rw 		INTEN12
rw 		INTEN11
rw 		INTEN10
rw 		INTEN9
rw 		INTEN8
rw 		INTEN7
rw 		INTEN6
rw 		INTEN5
rw 		INTEN4
rw 		INTEN3
rw 		INTEN2
rw 		INTEN1
rw 		INTEN0
rw
Toggle Fields.

INTEN0

Bit 0: Interrupt mask on line 0.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN1

Bit 1: Interrupt mask on line 1.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN2

Bit 2: Interrupt mask on line 2.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN3

Bit 3: Interrupt mask on line 3.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN4

Bit 4: Interrupt mask on line 4.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN5

Bit 5: Interrupt mask on line 5.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN6

Bit 6: Interrupt mask on line 6.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN7

Bit 7: Interrupt mask on line 7.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN8

Bit 8: Interrupt mask on line 8.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN9

Bit 9: Interrupt mask on line 9.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN10

Bit 10: Interrupt mask on line 10.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN11

Bit 11: Interrupt mask on line 11.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN12

Bit 12: Interrupt mask on line 12.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN13

Bit 13: Interrupt mask on line 13.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN14

Bit 14: Interrupt mask on line 14.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN15

Bit 15: Interrupt mask on line 15.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN16

Bit 16: Interrupt mask on line 16.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN17

Bit 17: Interrupt mask on line 17.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN18

Bit 18: Interrupt mask on line 18.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN19

Bit 19: Interrupt mask on line 19.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN20

Bit 20: Interrupt mask on line 20.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN21

Bit 21: Interrupt mask on line 21.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN22

Bit 22: Interrupt mask on line 22.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN23

Bit 23: Interrupt mask on line 23.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN24

Bit 24: Interrupt mask on line 24.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN25

Bit 25: Interrupt mask on line 25.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN26

Bit 26: Interrupt mask on line 26.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

INTEN27

Bit 27: Interrupt mask on line 27.

Allowed values:
0: Masked: Interrupt from line is disabled
1: Unmasked: Interrupt from line is enabled

EVEN

Event enable register (EXTI_EVEN)

Offset: 0x4, reset: 0x00000000, access: read-write

28/28 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EVEN27
rw 		EVEN26
rw 		EVEN25
rw 		EVEN24
rw 		EVEN23
rw 		EVEN22
rw 		EVEN21
rw 		EVEN20
rw 		EVEN19
rw 		EVEN18
rw 		EVEN17
rw 		EVEN16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EVEN15
rw 		EVEN14
rw 		EVEN13
rw 		EVEN12
rw 		EVEN11
rw 		EVEN10
rw 		EVEN9
rw 		EVEN8
rw 		EVEN7
rw 		EVEN6
rw 		EVEN5
rw 		EVEN4
rw 		EVEN3
rw 		EVEN2
rw 		EVEN1
rw 		EVEN0
rw
Toggle Fields.

EVEN0

Bit 0: Event enable on line 0.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN1

Bit 1: Event enable on line 1.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN2

Bit 2: Event enable on line 2.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN3

Bit 3: Event enable on line 3.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN4

Bit 4: Event enable on line 4.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN5

Bit 5: Event enable on line 5.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN6

Bit 6: Event enable on line 6.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN7

Bit 7: Event enable on line 7.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN8

Bit 8: Event enable on line 8.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN9

Bit 9: Event enable on line 9.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN10

Bit 10: Event enable on line 10.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN11

Bit 11: Event enable on line 11.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN12

Bit 12: Event enable on line 12.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN13

Bit 13: Event enable on line 13.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN14

Bit 14: Event enable on line 14.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN15

Bit 15: Event enable on line 15.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN16

Bit 16: Event enable on line 16.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN17

Bit 17: Event enable on line 17.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN18

Bit 18: Event enable on line 18.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN19

Bit 19: Event enable on line 19.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN20

Bit 20: Event enable on line 20.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN21

Bit 21: Event enable on line 21.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN22

Bit 22: Event enable on line 22.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN23

Bit 23: Event enable on line 23.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN24

Bit 24: Event enable on line 24.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN25

Bit 25: Event enable on line 25.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN26

Bit 26: Event enable on line 26.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

EVEN27

Bit 27: Event enable on line 27.

Allowed values:
0: Masked: Event from line is disabled
1: Unmasked: Event from line is enabled

RTEN

Rising Edge Trigger Enable register (EXTI_RTEN)

Offset: 0x8, reset: 0x00000000, access: read-write

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
RTEN22
rw 		RTEN21
rw 		RTEN19
rw 		RTEN18
rw 		RTEN17
rw 		RTEN16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTEN15
rw 		RTEN14
rw 		RTEN13
rw 		RTEN12
rw 		RTEN11
rw 		RTEN10
rw 		RTEN9
rw 		RTEN8
rw 		RTEN7
rw 		RTEN6
rw 		RTEN5
rw 		RTEN4
rw 		RTEN3
rw 		RTEN2
rw 		RTEN1
rw 		RTEN0
rw
Toggle Fields.

RTEN0

Bit 0: Rising edge trigger enable of line 0.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN1

Bit 1: Rising edge trigger enable of line 1.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN2

Bit 2: Rising edge trigger enable of line 2.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN3

Bit 3: Rising edge trigger enable of line 3.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN4

Bit 4: Rising edge trigger enable of line 4.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN5

Bit 5: Rising edge trigger enable of line 5.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN6

Bit 6: Rising edge trigger enable of line 6.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN7

Bit 7: Rising edge trigger enable of line 7.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN8

Bit 8: Rising edge trigger enable of line 8.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN9

Bit 9: Rising edge trigger enable of line 9.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN10

Bit 10: Rising edge trigger enable of line 10.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN11

Bit 11: Rising edge trigger enable of line 11.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN12

Bit 12: Rising edge trigger enable of line 12.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN13

Bit 13: Rising edge trigger enable of line 13.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN14

Bit 14: Rising edge trigger enable of line 14.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN15

Bit 15: Rising edge trigger enable of line 15.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN16

Bit 16: Rising edge trigger enable of line 16.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN17

Bit 17: Rising edge trigger enable of line 17.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN18

Bit 18: Rising edge trigger enable of line 18.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN19

Bit 19: Rising edge trigger enable of line 19.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN21

Bit 21: Rising edge trigger enable of line 21.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

RTEN22

Bit 22: Rising edge trigger enable of line 22.

Allowed values:
0: Disabled: Rising edge trigger is disabled
1: Enabled: Rising edge trigger is enabled

FTEN

Falling Egde Trigger Enable register (EXTI_FTEN)

Offset: 0xC, reset: 0x00000000, access: read-write

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FTEN22
rw 		FTEN21
rw 		FTEN19
rw 		FTEN18
rw 		FTEN17
rw 		FTEN16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FTEN15
rw 		FTEN14
rw 		FTEN13
rw 		FTEN12
rw 		FTEN11
rw 		FTEN10
rw 		FTEN9
rw 		FTEN8
rw 		FTEN7
rw 		FTEN6
rw 		FTEN5
rw 		FTEN4
rw 		FTEN3
rw 		FTEN2
rw 		FTEN1
rw 		FTEN0
rw
Toggle Fields.

FTEN0

Bit 0: Falling edge trigger enable of line 0.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN1

Bit 1: Falling edge trigger enable of line 1.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN2

Bit 2: Falling edge trigger enable of line 2.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN3

Bit 3: Falling edge trigger enable of line 3.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN4

Bit 4: Falling edge trigger enable of line 4.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN5

Bit 5: Falling edge trigger enable of line 5.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN6

Bit 6: Falling edge trigger enable of line 6.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN7

Bit 7: Falling edge trigger enable of line 7.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN8

Bit 8: Falling edge trigger enable of line 8.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN9

Bit 9: Falling edge trigger enable of line 9.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN10

Bit 10: Falling edge trigger enable of line 10.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN11

Bit 11: Falling edge trigger enable of line 11.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN12

Bit 12: Falling edge trigger enable of line 12.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN13

Bit 13: Falling edge trigger enable of line 13.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN14

Bit 14: Falling edge trigger enable of line 14.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN15

Bit 15: Falling edge trigger enable of line 15.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN16

Bit 16: Falling edge trigger enable of line 16.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN17

Bit 17: Falling edge trigger enable of line 17.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN18

Bit 18: Falling edge trigger enable of line 18.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN19

Bit 19: Falling edge trigger enable of line 19.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN21

Bit 21: Falling edge trigger enable of line 21.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

FTEN22

Bit 22: Falling edge trigger enable of line 22.

Allowed values:
0: Disabled: Falling edge trigger is disabled
1: Enabled: Falling edge trigger is enabled

SWIEV

Software interrupt event register (EXTI_SWIEV)

Offset: 0x10, reset: 0x00000000, access: read-write

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SWIEV22
rw 		SWIEV21
rw 		SWIEV19
rw 		SWIEV18
rw 		SWIEV17
rw 		SWIEV16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SWIEV15
rw 		SWIEV14
rw 		SWIEV13
rw 		SWIEV12
rw 		SWIEV11
rw 		SWIEV10
rw 		SWIEV9
rw 		SWIEV8
rw 		SWIEV7
rw 		SWIEV6
rw 		SWIEV5
rw 		SWIEV4
rw 		SWIEV3
rw 		SWIEV2
rw 		SWIEV1
rw 		SWIEV0
rw
Toggle Fields.

SWIEV0

Bit 0: Interrupt/Event software trigger on line 0.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV1

Bit 1: Interrupt/Event software trigger on line 1.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV2

Bit 2: Interrupt/Event software trigger on line 2.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV3

Bit 3: Interrupt/Event software trigger on line 3.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV4

Bit 4: Interrupt/Event software trigger on line 4.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV5

Bit 5: Interrupt/Event software trigger on line 5.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV6

Bit 6: Interrupt/Event software trigger on line 6.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV7

Bit 7: Interrupt/Event software trigger on line 7.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV8

Bit 8: Interrupt/Event software trigger on line 8.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV9

Bit 9: Interrupt/Event software trigger on line 9.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV10

Bit 10: Interrupt/Event software trigger on line 10.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV11

Bit 11: Interrupt/Event software trigger on line 11.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV12

Bit 12: Interrupt/Event software trigger on line 12.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV13

Bit 13: Interrupt/Event software trigger on line 13.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV14

Bit 14: Interrupt/Event software trigger on line 14.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV15

Bit 15: Interrupt/Event software trigger on line 15.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV16

Bit 16: Interrupt/Event software trigger on line 16.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV17

Bit 17: Interrupt/Event software trigger on line 17.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV18

Bit 18: Interrupt/Event software trigger on line 18.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV19

Bit 19: Interrupt/Event software trigger on line 19.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV21

Bit 21: Interrupt/Event software trigger on line 21.

Allowed values:
1: Pend: Generates an interrupt request

SWIEV22

Bit 22: Interrupt/Event software trigger on line 22.

Allowed values:
1: Pend: Generates an interrupt request

PD

Pending register (EXTI_PD)

Offset: 0x14, reset: 0x00000000, access: read-write

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PD22
rw 		PD21
rw 		PD19
rw 		PD18
rw 		PD17
rw 		PD16
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PD15
rw 		PD14
rw 		PD13
rw 		PD12
rw 		PD11
rw 		PD10
rw 		PD9
rw 		PD8
rw 		PD7
rw 		PD6
rw 		PD5
rw 		PD4
rw 		PD3
rw 		PD2
rw 		PD1
rw 		PD0
rw
Toggle Fields.

PD0

Bit 0: Interrupt pending status of line 0.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD1

Bit 1: Interrupt pending status of line 1.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD2

Bit 2: Interrupt pending status of line 2.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD3

Bit 3: Interrupt pending status of line 3.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD4

Bit 4: Interrupt pending status of line 4.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD5

Bit 5: Interrupt pending status of line 5.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD6

Bit 6: Interrupt pending status of line 6.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD7

Bit 7: Interrupt pending status of line 7.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD8

Bit 8: Interrupt pending status of line 8.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD9

Bit 9: Interrupt pending status of line 9.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD10

Bit 10: Interrupt pending status of line 10.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD11

Bit 11: Interrupt pending status of line 11.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD12

Bit 12: Interrupt pending status of line 12.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD13

Bit 13: Interrupt pending status of line 13.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD14

Bit 14: Interrupt pending status of line 14.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD15

Bit 15: Interrupt pending status of line 15.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD16

Bit 16: Interrupt pending status of line 16.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD17

Bit 17: Interrupt pending status of line 17.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD18

Bit 18: Interrupt pending status of line 18.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD19

Bit 19: Interrupt pending status of line 19.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD21

Bit 21: Interrupt pending status of line 21.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

PD22

Bit 22: Interrupt pending status of line 22.

Allowed values:
0: NotPending: No trigger request occurred
1: Pending: Selected trigger request occurred

FMC

0x40022000: FMC

27/27 fields covered. Toggle Registers.

WS

Wait state register

Offset: 0x0, reset: 0x00000000, access: Unspecified

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WSCNT
rw
Toggle Fields.

WSCNT

Bits 0-2: Wait state counter register.

Allowed values:
0: WS0: 0 wait states added
1: WS1: 1 wait state added
2: WS2: 2 wait states added

KEY

Flash unlock key register

Offset: 0x4, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
KEY
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
w
Toggle Fields.

KEY

Bits 0-31: FMC_CTL unlock registers.

Allowed values: 0-4294967295

OBKEY

Flash option byte unlock key register

Offset: 0x8, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OBKEY
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OBKEY
w
Toggle Fields.

OBKEY

Bits 0-31: FMC_CTL option byte operation unlock registers.

Allowed values: 0-4294967295

STAT

Flash status register

Offset: 0xC, reset: 0x00000000, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ENDF
rw 		WPERR
rw 		PGERR
rw 		BUSY
r
Toggle Fields.

BUSY

Bit 0: The flash busy bit.

Allowed values:
0: Inactive: No operation is in progress
1: Active: An operation is in progress

PGERR

Bit 2: Program error flag bit.

Allowed values:
0: NoError: There was no error
1: Error: There was an error programming flash

WPERR

Bit 4: Erase/Program protection error flag bit.

Allowed values:
0: NoError: There was no error
1: Error: There was an error erasing/programming protected pages

ENDF

Bit 5: End of operation flag bit.

Allowed values:
0: NoEvent: No end of operation occurred
1: Event: An end of operation event occurred

CTL

Flash control register

Offset: 0x10, reset: 0x00000080, access: read-write

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OBRLD
rw 		ENDIE
rw 		ERRIE
rw 		OBWEN
rw 		LK
rw 		START
rw 		OBER
rw 		OBPG
rw 		MER
rw 		PER
rw 		PG
rw
Toggle Fields.

PG

Bit 0: Main flash page program command bit.

Allowed values:
1: Program: Flash programming activated

PER

Bit 1: Main flash page erase command bit.

Allowed values:
1: PageErase: Erase activated for selected page

MER

Bit 2: Main flash mass erase command bit.

Allowed values:
1: MassErase: Erase activated for all user sectors

OBPG

Bit 4: Option byte program command bit.

Allowed values:
1: OptionByteProgramming: Program option byte activated

OBER

Bit 5: Option byte erase command bit.

Allowed values:
1: OptionByteErase: Erase option byte activated

START

Bit 6: Send erase command to FMC bit.

Allowed values:
1: Start: Trigger an erase operation

LK

Bit 7: FMC_CTL lock bit.

Allowed values:
0: Unlocked: CTL register is unlocked
1: Locked: CTL register is locked

OBWEN

Bit 9: Option byte erase/program enable bit.

Allowed values:
0: Disabled: Option byte write disabled
1: Enabled: Option byte write enabled

ERRIE

Bit 10: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt generation disabled
1: Enabled: Error interrupt generation enabled

ENDIE

Bit 12: End of operation interrupt enable.

Allowed values:
0: Disabled: End of operation interrupt disabled
1: Enabled: End of operation interrupt enabled

OBRLD

Bit 13: Option byte reload bit.

Allowed values:
1: Reload: Force option bytes reload and reset

ADDR

Flash address register

Offset: 0x14, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDR
rw
Toggle Fields.

ADDR

Bits 0-31: Flash command address.

Allowed values: 0-4294967295

OBSTAT

Option byte status register

Offset: 0x1C, reset: 0x00000000, access: read-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OB_DATA
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OB_USER
r 		PLEVEL
r 		OBERR
r
Toggle Fields.

OBERR

Bit 0: Option byte read error.

Allowed values:
0: NoError: No error with option bytes
1: Error: Option bytes and complement bytes do not match

PLEVEL

Bits 1-2: Security Protection level.

Allowed values:
0: None: No protection level
1: Low: Low protection level
3: High: High protection level

OB_USER

Bits 8-15: Store OB_USER byte of option byte block after system reset.

Allowed values: 0-255

OB_DATA

Bits 16-31: Store OB_DATA[15:0] of option byte block after system reset.

Allowed values: 0-65535

WP

Write protection register

Offset: 0x20, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OB_WP
r
Toggle Fields.

OB_WP

Bits 0-15: Store OB_WP[15:0] of option byte block after system reset.

Allowed values: 0-65535

WSEN

Flash wait state control register

Offset: 0xFC, reset: 0x00000000, access: read-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BPEN
r 		WSEN
r
Toggle Fields.

WSEN

Bit 0: FMC wait state enable register.

Allowed values:
0: NoWaitState: No wait state added
1: WaitState: Wait state added

BPEN

Bit 1: FMC bit program enable register.

PID

Flash Product ID register

Offset: 0x100, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PID
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PID
r
Toggle Fields.

PID

Bits 0-31: Product reserved ID code register1.

Allowed values: 0-4294967295

FWDGT

0x40003000: free watchdog timer

7/7 fields covered. Toggle Registers.

CTL

Control register

Offset: 0x0, reset: 0x00000000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMD
w
Toggle Fields.

CMD

Bits 0-15: Key value.

Allowed values:
21845: Enable: Enable access to PR, RLR and WINR registers (0x5555)
43690: Reset: Reset the watchdog value (0xAAAA)
52428: Start: Start the watchdog (0xCCCC)

PSC

Prescaler register

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-2: Free watchdog timer prescaler selection.

Allowed values:
0: DivideBy4: Divider /4
1: DivideBy8: Divider /8
2: DivideBy16: Divider /16
3: DivideBy32: Divider /32
4: DivideBy64: Divider /64
5: DivideBy128: Divider /128
6: DivideBy256: Divider /256
7: DivideBy256bis: Divider /256

RLD

Reload register

Offset: 0x8, reset: 0x00000FFF, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RLD
rw
Toggle Fields.

RLD

Bits 0-11: Free watchdog timer counter reload value.

Allowed values: 0-4095

STAT

Status register

Offset: 0xC, reset: 0x00000000, access: read-only

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WUD
r 		RUD
r 		PUD
r
Toggle Fields.

PUD

Bit 0: Free watchdog timer prescaler value update.

Allowed values:
0: Valid: The value read from the PSC register is valid
1: Ongoing: A write operation to to the PSC register is ongoing, so the value read is invalid

RUD

Bit 1: Free watchdog timer counter reload value update.

Allowed values:
0: Valid: The value read from the RLD register is valid
1: Ongoing: A write operation to to the RLD register is ongoing, so the value read is invalid

WUD

Bit 2: Watchdog counter window value update.

Allowed values:
0: Valid: The value read from the WND register is valid
1: Ongoing: A write operation to to the WND register is ongoing, so the value read is invalid

WND

Window register

Offset: 0x10, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WND
r
Toggle Fields.

WND

Bits 0-11: Watchdog counter window value.

Allowed values: 0-4095

GPIOA

0x48000000: General-purpose I/Os

193/193 fields covered. Toggle Registers.

CTL

GPIO port control register

Offset: 0x0, reset: 0x28000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTL15
rw 		CTL14
rw 		CTL13
rw 		CTL12
rw 		CTL11
rw 		CTL10
rw 		CTL9
rw 		CTL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTL7
rw 		CTL6
rw 		CTL5
rw 		CTL4
rw 		CTL3
rw 		CTL2
rw 		CTL1
rw 		CTL0
rw
Toggle Fields.

CTL0

Bits 0-1: Pin 0 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL1

Bits 2-3: Pin 1 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL2

Bits 4-5: Pin 2 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL3

Bits 6-7: Pin 3 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL4

Bits 8-9: Pin 4 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL5

Bits 10-11: Pin 5 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL6

Bits 12-13: Pin 6 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL7

Bits 14-15: Pin 7 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL8

Bits 16-17: Pin 8 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL9

Bits 18-19: Pin 9 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL10

Bits 20-21: Pin 10 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL11

Bits 22-23: Pin 11 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL12

Bits 24-25: Pin 12 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL13

Bits 26-27: Pin 13 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL14

Bits 28-29: Pin 14 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL15

Bits 30-31: Pin 15 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OMODE

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OM15
rw 		OM14
rw 		OM13
rw 		OM12
rw 		OM11
rw 		OM10
rw 		OM9
rw 		OM8
rw 		OM7
rw 		OM6
rw 		OM5
rw 		OM4
rw 		OM3
rw 		OM2
rw 		OM1
rw 		OM0
rw
Toggle Fields.

OM0

Bit 0: Pin 0 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM1

Bit 1: Pin 1 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM2

Bit 2: Pin 2 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM3

Bit 3: Pin 3 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM4

Bit 4: Pin 4 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM5

Bit 5: Pin 5 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM6

Bit 6: Pin 6 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM7

Bit 7: Pin 7 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM8

Bit 8: Pin 8 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM9

Bit 9: Pin 9 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM10

Bit 10: Pin 10 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM11

Bit 11: Pin 11 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM12

Bit 12: Pin 12 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM13

Bit 13: Pin 13 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM14

Bit 14: Pin 14 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM15

Bit 15: Pin 15 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPD

GPIO port output speed register

Offset: 0x8, reset: 0x0C000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPD15
rw 		OSPD14
rw 		OSPD13
rw 		OSPD12
rw 		OSPD11
rw 		OSPD10
rw 		OSPD9
rw 		OSPD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPD7
rw 		OSPD6
rw 		OSPD5
rw 		OSPD4
rw 		OSPD3
rw 		OSPD2
rw 		OSPD1
rw 		OSPD0
rw
Toggle Fields.

OSPD0

Bits 0-1: Pin 0 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD1

Bits 2-3: Pin 1 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD2

Bits 4-5: Pin 2 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD3

Bits 6-7: Pin 3 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD4

Bits 8-9: Pin 4 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD5

Bits 10-11: Pin 5 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD6

Bits 12-13: Pin 6 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD7

Bits 14-15: Pin 7 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD8

Bits 16-17: Pin 8 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD9

Bits 18-19: Pin 9 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD10

Bits 20-21: Pin 10 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD11

Bits 22-23: Pin 11 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD12

Bits 24-25: Pin 12 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD13

Bits 26-27: Pin 13 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD14

Bits 28-29: Pin 14 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD15

Bits 30-31: Pin 15 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

PUD

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x24000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUD15
rw 		PUD14
rw 		PUD13
rw 		PUD12
rw 		PUD11
rw 		PUD10
rw 		PUD9
rw 		PUD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUD7
rw 		PUD6
rw 		PUD5
rw 		PUD4
rw 		PUD3
rw 		PUD2
rw 		PUD1
rw 		PUD0
rw
Toggle Fields.

PUD0

Bits 0-1: Pin 0 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD1

Bits 2-3: Pin 1 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD2

Bits 4-5: Pin 2 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD3

Bits 6-7: Pin 3 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD4

Bits 8-9: Pin 4 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD5

Bits 10-11: Pin 5 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD6

Bits 12-13: Pin 6 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD7

Bits 14-15: Pin 7 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD8

Bits 16-17: Pin 8 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD9

Bits 18-19: Pin 9 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD10

Bits 20-21: Pin 10 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD11

Bits 22-23: Pin 11 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD12

Bits 24-25: Pin 12 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD13

Bits 26-27: Pin 13 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD14

Bits 28-29: Pin 14 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD15

Bits 30-31: Pin 15 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

ISTAT

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISTAT15
r 		ISTAT14
r 		ISTAT13
r 		ISTAT12
r 		ISTAT11
r 		ISTAT10
r 		ISTAT9
r 		ISTAT8
r 		ISTAT7
r 		ISTAT6
r 		ISTAT5
r 		ISTAT4
r 		ISTAT3
r 		ISTAT2
r 		ISTAT1
r 		ISTAT0
r
Toggle Fields.

ISTAT0

Bit 0: Port input data 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT1

Bit 1: Port input data 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT2

Bit 2: Port input data 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT3

Bit 3: Port input data 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT4

Bit 4: Port input data 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT5

Bit 5: Port input data 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT6

Bit 6: Port input data 6 .

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT7

Bit 7: Port input data 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT8

Bit 8: Port input data 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT9

Bit 9: Port input data 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT10

Bit 10: Port input data 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT11

Bit 11: Port input data 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT12

Bit 12: Port input data 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT13

Bit 13: Port input data 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT14

Bit 14: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT15

Bit 15: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

OCTL

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCTL15
rw 		OCTL14
rw 		OCTL13
rw 		OCTL12
rw 		OCTL11
rw 		OCTL10
rw 		OCTL9
rw 		OCTL8
rw 		OCTL7
rw 		OCTL6
rw 		OCTL5
rw 		OCTL4
rw 		OCTL3
rw 		OCTL2
rw 		OCTL1
rw 		OCTL0
rw
Toggle Fields.

OCTL0

Bit 0: Port output data 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL1

Bit 1: Port output data 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL2

Bit 2: Port output data 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL3

Bit 3: Port output data 3 .

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL4

Bit 4: Port output data 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL5

Bit 5: Port output data 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL6

Bit 6: Port output data 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL7

Bit 7: Port output data 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL8

Bit 8: Port output data 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL9

Bit 9: Port output data 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL10

Bit 10: Port output data 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL11

Bit 11: Port output data 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL12

Bit 12: Port output data 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL13

Bit 13: Port output data 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL14

Bit 14: Port output data 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL15

Bit 15: Port output data 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BOP

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOP15
w 		BOP14
w 		BOP13
w 		BOP12
w 		BOP11
w 		BOP10
w 		BOP9
w 		BOP8
w 		BOP7
w 		BOP6
w 		BOP5
w 		BOP4
w 		BOP3
w 		BOP2
w 		BOP1
w 		BOP0
w
Toggle Fields.

BOP0

Bit 0: Port set bit 0.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP1

Bit 1: Port set bit 1.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP2

Bit 2: Port set bit 2.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP3

Bit 3: Port set bit 3.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP4

Bit 4: Port set bit 4.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP5

Bit 5: Port set bit 5.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP6

Bit 6: Port set bit 6.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP7

Bit 7: Port set bit 7.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP8

Bit 8: Port set bit 8.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP9

Bit 9: Port set bit 9.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP10

Bit 10: Port set bit 10.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP11

Bit 11: Port set bit 11.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP12

Bit 12: Port set bit 12.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP13

Bit 13: Port set bit 13.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP14

Bit 14: Port set bit 14.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP15

Bit 15: Port set bit15.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

CR0

Bit 16: Port reset bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 17: Port reset bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 18: Port reset bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 19: Port reset bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 20: Port reset bit 4 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 21: Port reset bit 5 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 22: Port reset bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 23: Port reset bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 24: Port reset bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 25: Port reset bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 26: Port reset bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 27: Port reset bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 28: Port reset bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 29: Port reset bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 30: Port reset bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 31: Port reset bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

LOCK

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LK15
rw 		LK14
rw 		LK13
rw 		LK12
rw 		LK11
rw 		LK10
rw 		LK9
rw 		LK8
rw 		LK7
rw 		LK6
rw 		LK5
rw 		LK4
rw 		LK3
rw 		LK2
rw 		LK1
rw 		LK0
rw
Toggle Fields.

LK0

Bit 0: Port lock bit 0 .

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK1

Bit 1: Port lock bit 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK2

Bit 2: Port lock bit 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK3

Bit 3: Port lock bit 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK4

Bit 4: Port lock bit 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK5

Bit 5: Port lock bit 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK6

Bit 6: Port lock bit 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK7

Bit 7: Port lock bit 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK8

Bit 8: Port lock bit 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK9

Bit 9: Port lock bit 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK10

Bit 10: Port lock bit 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK11

Bit 11: Port lock bit 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK12

Bit 12: Port lock bit 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK13

Bit 13: Port lock bit 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK14

Bit 14: Port lock bit 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK15

Bit 15: Port lock bit 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LKK

Bit 16: Lock key .

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFSEL0

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL7
rw 		SEL6
rw 		SEL5
rw 		SEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL3
rw 		SEL2
rw 		SEL1
rw 		SEL0
rw
Toggle Fields.

SEL0

Bits 0-3: Pin 0 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL1

Bits 4-7: Pin 1 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL2

Bits 8-11: Pin 2 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL3

Bits 12-15: Pin 3 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL4

Bits 16-19: Pin 4 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL5

Bits 20-23: Pin 5 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL6

Bits 24-27: Pin 6 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL7

Bits 28-31: Pin 7 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

AFSEL1

GPIO alternate function register 1

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL15
rw 		SEL14
rw 		SEL13
rw 		SEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL11
rw 		SEL10
rw 		SEL9
rw 		SEL8
rw
Toggle Fields.

SEL8

Bits 0-3: Pin 8 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL9

Bits 4-7: Pin 9 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL10

Bits 8-11: Pin 10 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL11

Bits 12-15: Pin 11 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL12

Bits 16-19: Pin 12 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL13

Bits 20-23: Pin 13 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL14

Bits 24-27: Pin 14 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL15

Bits 28-31: Pin 15 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

BC

Port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
Toggle Fields.

CR0

Bit 0: Port cleat bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 1: Port cleat bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 2: Port cleat bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 3: Port cleat bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 4: Port cleat bit 4.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 5: Port cleat bit 5.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 6: Port cleat bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 7: Port cleat bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 8: Port cleat bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 9: Port cleat bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 10: Port cleat bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 11: Port cleat bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 12: Port cleat bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 13: Port cleat bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 14: Port cleat bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 15: Port cleat bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

TG

Port bit toggle register

Offset: 0x2C, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG15
w 		TG14
w 		TG13
w 		TG12
w 		TG11
w 		TG10
w 		TG9
w 		TG8
w 		TG7
w 		TG6
w 		TG5
w 		TG4
w 		TG3
w 		TG2
w 		TG1
w 		TG0
w
Toggle Fields.

TG0

Bit 0: Port toggle bit 0.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG1

Bit 1: Port toggle bit 1.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG2

Bit 2: Port toggle bit 2.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG3

Bit 3: Port toggle bit 3.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG4

Bit 4: Port toggle bit 4.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG5

Bit 5: Port toggle bit 5.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG6

Bit 6: Port toggle bit 6.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG7

Bit 7: Port toggle bit 7.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG8

Bit 8: Port toggle bit 8.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG9

Bit 9: Port toggle bit 9.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG10

Bit 10: Port toggle bit 10.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG11

Bit 11: Port toggle bit 11.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG12

Bit 12: Port toggle bit 12.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG13

Bit 13: Port toggle bit 13.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG14

Bit 14: Port toggle bit 14.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG15

Bit 15: Port toggle bit 15.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

GPIOB

0x48000400: General-purpose I/Os

193/193 fields covered. Toggle Registers.

CTL

GPIO port control register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTL15
rw 		CTL14
rw 		CTL13
rw 		CTL12
rw 		CTL11
rw 		CTL10
rw 		CTL9
rw 		CTL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTL7
rw 		CTL6
rw 		CTL5
rw 		CTL4
rw 		CTL3
rw 		CTL2
rw 		CTL1
rw 		CTL0
rw
Toggle Fields.

CTL0

Bits 0-1: Pin 0 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL1

Bits 2-3: Pin 1 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL2

Bits 4-5: Pin 2 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL3

Bits 6-7: Pin 3 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL4

Bits 8-9: Pin 4 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL5

Bits 10-11: Pin 5 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL6

Bits 12-13: Pin 6 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL7

Bits 14-15: Pin 7 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL8

Bits 16-17: Pin 8 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL9

Bits 18-19: Pin 9 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL10

Bits 20-21: Pin 10 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL11

Bits 22-23: Pin 11 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL12

Bits 24-25: Pin 12 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL13

Bits 26-27: Pin 13 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL14

Bits 28-29: Pin 14 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL15

Bits 30-31: Pin 15 configuration bits.

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OMODE

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OM15
rw 		OM14
rw 		OM13
rw 		OM12
rw 		OM11
rw 		OM10
rw 		OM9
rw 		OM8
rw 		OM7
rw 		OM6
rw 		OM5
rw 		OM4
rw 		OM3
rw 		OM2
rw 		OM1
rw 		OM0
rw
Toggle Fields.

OM0

Bit 0: Pin 0 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM1

Bit 1: Pin 1 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM2

Bit 2: Pin 2 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM3

Bit 3: Pin 3 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM4

Bit 4: Pin 4 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM5

Bit 5: Pin 5 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM6

Bit 6: Pin 6 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM7

Bit 7: Pin 7 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM8

Bit 8: Pin 8 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM9

Bit 9: Pin 9 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM10

Bit 10: Pin 10 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM11

Bit 11: Pin 11 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM12

Bit 12: Pin 12 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM13

Bit 13: Pin 13 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM14

Bit 14: Pin 14 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM15

Bit 15: Pin 15 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPD

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPD15
rw 		OSPD14
rw 		OSPD13
rw 		OSPD12
rw 		OSPD11
rw 		OSPD10
rw 		OSPD9
rw 		OSPD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPD7
rw 		OSPD6
rw 		OSPD5
rw 		OSPD4
rw 		OSPD3
rw 		OSPD2
rw 		OSPD1
rw 		OSPD0
rw
Toggle Fields.

OSPD0

Bits 0-1: Pin 0 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD1

Bits 2-3: Pin 1 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD2

Bits 4-5: Pin 2 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD3

Bits 6-7: Pin 3 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD4

Bits 8-9: Pin 4 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD5

Bits 10-11: Pin 5 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD6

Bits 12-13: Pin 6 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD7

Bits 14-15: Pin 7 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD8

Bits 16-17: Pin 8 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD9

Bits 18-19: Pin 9 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD10

Bits 20-21: Pin 10 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD11

Bits 22-23: Pin 11 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD12

Bits 24-25: Pin 12 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD13

Bits 26-27: Pin 13 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD14

Bits 28-29: Pin 14 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD15

Bits 30-31: Pin 15 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

PUD

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUD15
rw 		PUD14
rw 		PUD13
rw 		PUD12
rw 		PUD11
rw 		PUD10
rw 		PUD9
rw 		PUD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUD7
rw 		PUD6
rw 		PUD5
rw 		PUD4
rw 		PUD3
rw 		PUD2
rw 		PUD1
rw 		PUD0
rw
Toggle Fields.

PUD0

Bits 0-1: Pin 0 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD1

Bits 2-3: Pin 1 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD2

Bits 4-5: Pin 2 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD3

Bits 6-7: Pin 3 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD4

Bits 8-9: Pin 4 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD5

Bits 10-11: Pin 5 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD6

Bits 12-13: Pin 6 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD7

Bits 14-15: Pin 7 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD8

Bits 16-17: Pin 8 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD9

Bits 18-19: Pin 9 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD10

Bits 20-21: Pin 10 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD11

Bits 22-23: Pin 11 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD12

Bits 24-25: Pin 12 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD13

Bits 26-27: Pin 13 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD14

Bits 28-29: Pin 14 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD15

Bits 30-31: Pin 15 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

ISTAT

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISTAT15
r 		ISTAT14
r 		ISTAT13
r 		ISTAT12
r 		ISTAT11
r 		ISTAT10
r 		ISTAT9
r 		ISTAT8
r 		ISTAT7
r 		ISTAT6
r 		ISTAT5
r 		ISTAT4
r 		ISTAT3
r 		ISTAT2
r 		ISTAT1
r 		ISTAT0
r
Toggle Fields.

ISTAT0

Bit 0: Port input data 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT1

Bit 1: Port input data 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT2

Bit 2: Port input data 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT3

Bit 3: Port input data 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT4

Bit 4: Port input data 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT5

Bit 5: Port input data 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT6

Bit 6: Port input data 6 .

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT7

Bit 7: Port input data 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT8

Bit 8: Port input data 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT9

Bit 9: Port input data 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT10

Bit 10: Port input data 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT11

Bit 11: Port input data 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT12

Bit 12: Port input data 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT13

Bit 13: Port input data 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT14

Bit 14: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT15

Bit 15: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

OCTL

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCTL15
rw 		OCTL14
rw 		OCTL13
rw 		OCTL12
rw 		OCTL11
rw 		OCTL10
rw 		OCTL9
rw 		OCTL8
rw 		OCTL7
rw 		OCTL6
rw 		OCTL5
rw 		OCTL4
rw 		OCTL3
rw 		OCTL2
rw 		OCTL1
rw 		OCTL0
rw
Toggle Fields.

OCTL0

Bit 0: Port output data 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL1

Bit 1: Port output data 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL2

Bit 2: Port output data 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL3

Bit 3: Port output data 3 .

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL4

Bit 4: Port output data 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL5

Bit 5: Port output data 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL6

Bit 6: Port output data 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL7

Bit 7: Port output data 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL8

Bit 8: Port output data 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL9

Bit 9: Port output data 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL10

Bit 10: Port output data 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL11

Bit 11: Port output data 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL12

Bit 12: Port output data 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL13

Bit 13: Port output data 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL14

Bit 14: Port output data 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL15

Bit 15: Port output data 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BOP

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOP15
w 		BOP14
w 		BOP13
w 		BOP12
w 		BOP11
w 		BOP10
w 		BOP9
w 		BOP8
w 		BOP7
w 		BOP6
w 		BOP5
w 		BOP4
w 		BOP3
w 		BOP2
w 		BOP1
w 		BOP0
w
Toggle Fields.

BOP0

Bit 0: Port set bit 0.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP1

Bit 1: Port set bit 1.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP2

Bit 2: Port set bit 2.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP3

Bit 3: Port set bit 3.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP4

Bit 4: Port set bit 4.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP5

Bit 5: Port set bit 5.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP6

Bit 6: Port set bit 6.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP7

Bit 7: Port set bit 7.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP8

Bit 8: Port set bit 8.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP9

Bit 9: Port set bit 9.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP10

Bit 10: Port set bit 10.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP11

Bit 11: Port set bit 11.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP12

Bit 12: Port set bit 12.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP13

Bit 13: Port set bit 13.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP14

Bit 14: Port set bit 14.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP15

Bit 15: Port set bit15.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

CR0

Bit 16: Port reset bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 17: Port reset bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 18: Port reset bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 19: Port reset bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 20: Port reset bit 4 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 21: Port reset bit 5 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 22: Port reset bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 23: Port reset bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 24: Port reset bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 25: Port reset bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 26: Port reset bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 27: Port reset bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 28: Port reset bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 29: Port reset bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 30: Port reset bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 31: Port reset bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

LOCK

GPIO port configuration lock register

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LKK
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
LK15
rw 		LK14
rw 		LK13
rw 		LK12
rw 		LK11
rw 		LK10
rw 		LK9
rw 		LK8
rw 		LK7
rw 		LK6
rw 		LK5
rw 		LK4
rw 		LK3
rw 		LK2
rw 		LK1
rw 		LK0
rw
Toggle Fields.

LK0

Bit 0: Port lock bit 0 .

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK1

Bit 1: Port lock bit 1.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK2

Bit 2: Port lock bit 2.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK3

Bit 3: Port lock bit 3.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK4

Bit 4: Port lock bit 4.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK5

Bit 5: Port lock bit 5.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK6

Bit 6: Port lock bit 6.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK7

Bit 7: Port lock bit 7.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK8

Bit 8: Port lock bit 8.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK9

Bit 9: Port lock bit 9.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK10

Bit 10: Port lock bit 10.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK11

Bit 11: Port lock bit 11.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK12

Bit 12: Port lock bit 12.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK13

Bit 13: Port lock bit 13.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK14

Bit 14: Port lock bit 14.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LK15

Bit 15: Port lock bit 15.

Allowed values:
0: Unlocked: Port configuration not locked
1: Locked: Port configuration locked

LKK

Bit 16: Lock key .

Allowed values:
0: NotActive: Port configuration lock key not active
1: Active: Port configuration lock key active

AFSEL0

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL7
rw 		SEL6
rw 		SEL5
rw 		SEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL3
rw 		SEL2
rw 		SEL1
rw 		SEL0
rw
Toggle Fields.

SEL0

Bits 0-3: Pin 0 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL1

Bits 4-7: Pin 1 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL2

Bits 8-11: Pin 2 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL3

Bits 12-15: Pin 3 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL4

Bits 16-19: Pin 4 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL5

Bits 20-23: Pin 5 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL6

Bits 24-27: Pin 6 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL7

Bits 28-31: Pin 7 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

AFSEL1

GPIO alternate function register 1

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL15
rw 		SEL14
rw 		SEL13
rw 		SEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL11
rw 		SEL10
rw 		SEL9
rw 		SEL8
rw
Toggle Fields.

SEL8

Bits 0-3: Pin 8 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL9

Bits 4-7: Pin 9 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL10

Bits 8-11: Pin 10 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL11

Bits 12-15: Pin 11 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL12

Bits 16-19: Pin 12 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL13

Bits 20-23: Pin 13 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL14

Bits 24-27: Pin 14 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL15

Bits 28-31: Pin 15 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

BC

Port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
Toggle Fields.

CR0

Bit 0: Port cleat bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 1: Port cleat bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 2: Port cleat bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 3: Port cleat bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 4: Port cleat bit 4.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 5: Port cleat bit 5.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 6: Port cleat bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 7: Port cleat bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 8: Port cleat bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 9: Port cleat bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 10: Port cleat bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 11: Port cleat bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 12: Port cleat bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 13: Port cleat bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 14: Port cleat bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 15: Port cleat bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

TG

Port bit toggle register

Offset: 0x2C, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG15
w 		TG14
w 		TG13
w 		TG12
w 		TG11
w 		TG10
w 		TG9
w 		TG8
w 		TG7
w 		TG6
w 		TG5
w 		TG4
w 		TG3
w 		TG2
w 		TG1
w 		TG0
w
Toggle Fields.

TG0

Bit 0: Port toggle bit 0.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG1

Bit 1: Port toggle bit 1.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG2

Bit 2: Port toggle bit 2.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG3

Bit 3: Port toggle bit 3.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG4

Bit 4: Port toggle bit 4.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG5

Bit 5: Port toggle bit 5.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG6

Bit 6: Port toggle bit 6.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG7

Bit 7: Port toggle bit 7.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG8

Bit 8: Port toggle bit 8.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG9

Bit 9: Port toggle bit 9.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG10

Bit 10: Port toggle bit 10.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG11

Bit 11: Port toggle bit 11.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG12

Bit 12: Port toggle bit 12.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG13

Bit 13: Port toggle bit 13.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG14

Bit 14: Port toggle bit 14.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG15

Bit 15: Port toggle bit 15.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

GPIOC

0x48000800: General-purpose I/Os

176/176 fields covered. Toggle Registers.

CTL

GPIO port control register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTL15
rw 		CTL14
rw 		CTL13
rw 		CTL12
rw 		CTL11
rw 		CTL10
rw 		CTL9
rw 		CTL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTL7
rw 		CTL6
rw 		CTL5
rw 		CTL4
rw 		CTL3
rw 		CTL2
rw 		CTL1
rw 		CTL0
rw
Toggle Fields.

CTL0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OMODE

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OM15
rw 		OM14
rw 		OM13
rw 		OM12
rw 		OM11
rw 		OM10
rw 		OM9
rw 		OM8
rw 		OM7
rw 		OM6
rw 		OM5
rw 		OM4
rw 		OM3
rw 		OM2
rw 		OM1
rw 		OM0
rw
Toggle Fields.

OM0

Bit 0: Pin 0 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM1

Bit 1: Pin 1 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM2

Bit 2: Pin 2 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM3

Bit 3: Pin 3 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM4

Bit 4: Pin 4 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM5

Bit 5: Pin 5 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM6

Bit 6: Pin 6 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM7

Bit 7: Pin 7 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM8

Bit 8: Pin 8 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM9

Bit 9: Pin 9 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM10

Bit 10: Pin 10 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM11

Bit 11: Pin 11 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM12

Bit 12: Pin 12 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM13

Bit 13: Pin 13 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM14

Bit 14: Pin 14 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM15

Bit 15: Pin 15 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPD

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPD15
rw 		OSPD14
rw 		OSPD13
rw 		OSPD12
rw 		OSPD11
rw 		OSPD10
rw 		OSPD9
rw 		OSPD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPD7
rw 		OSPD6
rw 		OSPD5
rw 		OSPD4
rw 		OSPD3
rw 		OSPD2
rw 		OSPD1
rw 		OSPD0
rw
Toggle Fields.

OSPD0

Bits 0-1: Pin 0 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD1

Bits 2-3: Pin 1 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD2

Bits 4-5: Pin 2 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD3

Bits 6-7: Pin 3 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD4

Bits 8-9: Pin 4 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD5

Bits 10-11: Pin 5 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD6

Bits 12-13: Pin 6 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD7

Bits 14-15: Pin 7 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD8

Bits 16-17: Pin 8 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD9

Bits 18-19: Pin 9 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD10

Bits 20-21: Pin 10 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD11

Bits 22-23: Pin 11 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD12

Bits 24-25: Pin 12 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD13

Bits 26-27: Pin 13 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD14

Bits 28-29: Pin 14 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD15

Bits 30-31: Pin 15 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

PUD

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUD15
rw 		PUD14
rw 		PUD13
rw 		PUD12
rw 		PUD11
rw 		PUD10
rw 		PUD9
rw 		PUD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUD7
rw 		PUD6
rw 		PUD5
rw 		PUD4
rw 		PUD3
rw 		PUD2
rw 		PUD1
rw 		PUD0
rw
Toggle Fields.

PUD0

Bits 0-1: Pin 0 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD1

Bits 2-3: Pin 1 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD2

Bits 4-5: Pin 2 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD3

Bits 6-7: Pin 3 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD4

Bits 8-9: Pin 4 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD5

Bits 10-11: Pin 5 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD6

Bits 12-13: Pin 6 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD7

Bits 14-15: Pin 7 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD8

Bits 16-17: Pin 8 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD9

Bits 18-19: Pin 9 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD10

Bits 20-21: Pin 10 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD11

Bits 22-23: Pin 11 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD12

Bits 24-25: Pin 12 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD13

Bits 26-27: Pin 13 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD14

Bits 28-29: Pin 14 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD15

Bits 30-31: Pin 15 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

ISTAT

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISTAT15
r 		ISTAT14
r 		ISTAT13
r 		ISTAT12
r 		ISTAT11
r 		ISTAT10
r 		ISTAT9
r 		ISTAT8
r 		ISTAT7
r 		ISTAT6
r 		ISTAT5
r 		ISTAT4
r 		ISTAT3
r 		ISTAT2
r 		ISTAT1
r 		ISTAT0
r
Toggle Fields.

ISTAT0

Bit 0: Port input data 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT1

Bit 1: Port input data 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT2

Bit 2: Port input data 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT3

Bit 3: Port input data 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT4

Bit 4: Port input data 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT5

Bit 5: Port input data 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT6

Bit 6: Port input data 6 .

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT7

Bit 7: Port input data 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT8

Bit 8: Port input data 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT9

Bit 9: Port input data 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT10

Bit 10: Port input data 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT11

Bit 11: Port input data 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT12

Bit 12: Port input data 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT13

Bit 13: Port input data 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT14

Bit 14: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT15

Bit 15: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

OCTL

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCTL15
rw 		OCTL14
rw 		OCTL13
rw 		OCTL12
rw 		OCTL11
rw 		OCTL10
rw 		OCTL9
rw 		OCTL8
rw 		OCTL7
rw 		OCTL6
rw 		OCTL5
rw 		OCTL4
rw 		OCTL3
rw 		OCTL2
rw 		OCTL1
rw 		OCTL0
rw
Toggle Fields.

OCTL0

Bit 0: Port output data 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL1

Bit 1: Port output data 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL2

Bit 2: Port output data 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL3

Bit 3: Port output data 3 .

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL4

Bit 4: Port output data 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL5

Bit 5: Port output data 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL6

Bit 6: Port output data 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL7

Bit 7: Port output data 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL8

Bit 8: Port output data 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL9

Bit 9: Port output data 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL10

Bit 10: Port output data 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL11

Bit 11: Port output data 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL12

Bit 12: Port output data 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL13

Bit 13: Port output data 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL14

Bit 14: Port output data 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL15

Bit 15: Port output data 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BOP

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOP15
w 		BOP14
w 		BOP13
w 		BOP12
w 		BOP11
w 		BOP10
w 		BOP9
w 		BOP8
w 		BOP7
w 		BOP6
w 		BOP5
w 		BOP4
w 		BOP3
w 		BOP2
w 		BOP1
w 		BOP0
w
Toggle Fields.

BOP0

Bit 0: Port set bit 0.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP1

Bit 1: Port set bit 1.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP2

Bit 2: Port set bit 2.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP3

Bit 3: Port set bit 3.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP4

Bit 4: Port set bit 4.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP5

Bit 5: Port set bit 5.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP6

Bit 6: Port set bit 6.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP7

Bit 7: Port set bit 7.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP8

Bit 8: Port set bit 8.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP9

Bit 9: Port set bit 9.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP10

Bit 10: Port set bit 10.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP11

Bit 11: Port set bit 11.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP12

Bit 12: Port set bit 12.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP13

Bit 13: Port set bit 13.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP14

Bit 14: Port set bit 14.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP15

Bit 15: Port set bit15.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

CR0

Bit 16: Port reset bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 17: Port reset bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 18: Port reset bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 19: Port reset bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 20: Port reset bit 4 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 21: Port reset bit 5 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 22: Port reset bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 23: Port reset bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 24: Port reset bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 25: Port reset bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 26: Port reset bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 27: Port reset bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 28: Port reset bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 29: Port reset bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 30: Port reset bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 31: Port reset bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

AFSEL0

GPIO alternate function low register

Offset: 0x20, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL7
rw 		SEL6
rw 		SEL5
rw 		SEL4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL3
rw 		SEL2
rw 		SEL1
rw 		SEL0
rw
Toggle Fields.

SEL0

Bits 0-3: Pin 0 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL1

Bits 4-7: Pin 1 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL2

Bits 8-11: Pin 2 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL3

Bits 12-15: Pin 3 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL4

Bits 16-19: Pin 4 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL5

Bits 20-23: Pin 5 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL6

Bits 24-27: Pin 6 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL7

Bits 28-31: Pin 7 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

AFSEL1

GPIO alternate function register 1

Offset: 0x24, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEL15
rw 		SEL14
rw 		SEL13
rw 		SEL12
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEL11
rw 		SEL10
rw 		SEL9
rw 		SEL8
rw
Toggle Fields.

SEL8

Bits 0-3: Pin 8 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL9

Bits 4-7: Pin 9 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL10

Bits 8-11: Pin 10 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL11

Bits 12-15: Pin 11 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL12

Bits 16-19: Pin 12 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL13

Bits 20-23: Pin 13 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL14

Bits 24-27: Pin 14 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

SEL15

Bits 28-31: Pin 15 alternate function selected.

Allowed values:
0: AF0: AF0
1: AF1: AF1
2: AF2: AF2
3: AF3: AF3
4: AF4: AF4
5: AF5: AF5
6: AF6: AF6
7: AF7: AF7
9: AF9: AF9
11: AF11: AF11

BC

Port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
Toggle Fields.

CR0

Bit 0: Port cleat bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 1: Port cleat bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 2: Port cleat bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 3: Port cleat bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 4: Port cleat bit 4.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 5: Port cleat bit 5.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 6: Port cleat bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 7: Port cleat bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 8: Port cleat bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 9: Port cleat bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 10: Port cleat bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 11: Port cleat bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 12: Port cleat bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 13: Port cleat bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 14: Port cleat bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 15: Port cleat bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

TG

Port bit toggle register

Offset: 0x2C, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG15
w 		TG14
w 		TG13
w 		TG12
w 		TG11
w 		TG10
w 		TG9
w 		TG8
w 		TG7
w 		TG6
w 		TG5
w 		TG4
w 		TG3
w 		TG2
w 		TG1
w 		TG0
w
Toggle Fields.

TG0

Bit 0: Port toggle bit 0.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG1

Bit 1: Port toggle bit 1.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG2

Bit 2: Port toggle bit 2.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG3

Bit 3: Port toggle bit 3.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG4

Bit 4: Port toggle bit 4.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG5

Bit 5: Port toggle bit 5.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG6

Bit 6: Port toggle bit 6.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG7

Bit 7: Port toggle bit 7.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG8

Bit 8: Port toggle bit 8.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG9

Bit 9: Port toggle bit 9.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG10

Bit 10: Port toggle bit 10.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG11

Bit 11: Port toggle bit 11.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG12

Bit 12: Port toggle bit 12.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG13

Bit 13: Port toggle bit 13.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG14

Bit 14: Port toggle bit 14.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG15

Bit 15: Port toggle bit 15.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

GPIOD

0x48000C00: General-purpose I/Os

160/160 fields covered. Toggle Registers.

CTL

GPIO port control register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTL15
rw 		CTL14
rw 		CTL13
rw 		CTL12
rw 		CTL11
rw 		CTL10
rw 		CTL9
rw 		CTL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTL7
rw 		CTL6
rw 		CTL5
rw 		CTL4
rw 		CTL3
rw 		CTL2
rw 		CTL1
rw 		CTL0
rw
Toggle Fields.

CTL0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OMODE

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OM15
rw 		OM14
rw 		OM13
rw 		OM12
rw 		OM11
rw 		OM10
rw 		OM9
rw 		OM8
rw 		OM7
rw 		OM6
rw 		OM5
rw 		OM4
rw 		OM3
rw 		OM2
rw 		OM1
rw 		OM0
rw
Toggle Fields.

OM0

Bit 0: Pin 0 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM1

Bit 1: Pin 1 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM2

Bit 2: Pin 2 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM3

Bit 3: Pin 3 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM4

Bit 4: Pin 4 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM5

Bit 5: Pin 5 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM6

Bit 6: Pin 6 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM7

Bit 7: Pin 7 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM8

Bit 8: Pin 8 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM9

Bit 9: Pin 9 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM10

Bit 10: Pin 10 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM11

Bit 11: Pin 11 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM12

Bit 12: Pin 12 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM13

Bit 13: Pin 13 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM14

Bit 14: Pin 14 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM15

Bit 15: Pin 15 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPD

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPD15
rw 		OSPD14
rw 		OSPD13
rw 		OSPD12
rw 		OSPD11
rw 		OSPD10
rw 		OSPD9
rw 		OSPD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPD7
rw 		OSPD6
rw 		OSPD5
rw 		OSPD4
rw 		OSPD3
rw 		OSPD2
rw 		OSPD1
rw 		OSPD0
rw
Toggle Fields.

OSPD0

Bits 0-1: Pin 0 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD1

Bits 2-3: Pin 1 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD2

Bits 4-5: Pin 2 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD3

Bits 6-7: Pin 3 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD4

Bits 8-9: Pin 4 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD5

Bits 10-11: Pin 5 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD6

Bits 12-13: Pin 6 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD7

Bits 14-15: Pin 7 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD8

Bits 16-17: Pin 8 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD9

Bits 18-19: Pin 9 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD10

Bits 20-21: Pin 10 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD11

Bits 22-23: Pin 11 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD12

Bits 24-25: Pin 12 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD13

Bits 26-27: Pin 13 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD14

Bits 28-29: Pin 14 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD15

Bits 30-31: Pin 15 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

PUD

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUD15
rw 		PUD14
rw 		PUD13
rw 		PUD12
rw 		PUD11
rw 		PUD10
rw 		PUD9
rw 		PUD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUD7
rw 		PUD6
rw 		PUD5
rw 		PUD4
rw 		PUD3
rw 		PUD2
rw 		PUD1
rw 		PUD0
rw
Toggle Fields.

PUD0

Bits 0-1: Pin 0 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD1

Bits 2-3: Pin 1 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD2

Bits 4-5: Pin 2 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD3

Bits 6-7: Pin 3 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD4

Bits 8-9: Pin 4 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD5

Bits 10-11: Pin 5 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD6

Bits 12-13: Pin 6 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD7

Bits 14-15: Pin 7 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD8

Bits 16-17: Pin 8 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD9

Bits 18-19: Pin 9 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD10

Bits 20-21: Pin 10 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD11

Bits 22-23: Pin 11 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD12

Bits 24-25: Pin 12 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD13

Bits 26-27: Pin 13 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD14

Bits 28-29: Pin 14 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD15

Bits 30-31: Pin 15 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

ISTAT

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISTAT15
r 		ISTAT14
r 		ISTAT13
r 		ISTAT12
r 		ISTAT11
r 		ISTAT10
r 		ISTAT9
r 		ISTAT8
r 		ISTAT7
r 		ISTAT6
r 		ISTAT5
r 		ISTAT4
r 		ISTAT3
r 		ISTAT2
r 		ISTAT1
r 		ISTAT0
r
Toggle Fields.

ISTAT0

Bit 0: Port input data 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT1

Bit 1: Port input data 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT2

Bit 2: Port input data 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT3

Bit 3: Port input data 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT4

Bit 4: Port input data 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT5

Bit 5: Port input data 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT6

Bit 6: Port input data 6 .

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT7

Bit 7: Port input data 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT8

Bit 8: Port input data 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT9

Bit 9: Port input data 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT10

Bit 10: Port input data 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT11

Bit 11: Port input data 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT12

Bit 12: Port input data 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT13

Bit 13: Port input data 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT14

Bit 14: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT15

Bit 15: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

OCTL

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCTL15
rw 		OCTL14
rw 		OCTL13
rw 		OCTL12
rw 		OCTL11
rw 		OCTL10
rw 		OCTL9
rw 		OCTL8
rw 		OCTL7
rw 		OCTL6
rw 		OCTL5
rw 		OCTL4
rw 		OCTL3
rw 		OCTL2
rw 		OCTL1
rw 		OCTL0
rw
Toggle Fields.

OCTL0

Bit 0: Port output data 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL1

Bit 1: Port output data 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL2

Bit 2: Port output data 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL3

Bit 3: Port output data 3 .

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL4

Bit 4: Port output data 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL5

Bit 5: Port output data 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL6

Bit 6: Port output data 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL7

Bit 7: Port output data 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL8

Bit 8: Port output data 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL9

Bit 9: Port output data 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL10

Bit 10: Port output data 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL11

Bit 11: Port output data 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL12

Bit 12: Port output data 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL13

Bit 13: Port output data 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL14

Bit 14: Port output data 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL15

Bit 15: Port output data 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BOP

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOP15
w 		BOP14
w 		BOP13
w 		BOP12
w 		BOP11
w 		BOP10
w 		BOP9
w 		BOP8
w 		BOP7
w 		BOP6
w 		BOP5
w 		BOP4
w 		BOP3
w 		BOP2
w 		BOP1
w 		BOP0
w
Toggle Fields.

BOP0

Bit 0: Port set bit 0.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP1

Bit 1: Port set bit 1.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP2

Bit 2: Port set bit 2.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP3

Bit 3: Port set bit 3.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP4

Bit 4: Port set bit 4.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP5

Bit 5: Port set bit 5.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP6

Bit 6: Port set bit 6.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP7

Bit 7: Port set bit 7.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP8

Bit 8: Port set bit 8.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP9

Bit 9: Port set bit 9.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP10

Bit 10: Port set bit 10.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP11

Bit 11: Port set bit 11.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP12

Bit 12: Port set bit 12.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP13

Bit 13: Port set bit 13.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP14

Bit 14: Port set bit 14.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP15

Bit 15: Port set bit15.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

CR0

Bit 16: Port reset bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 17: Port reset bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 18: Port reset bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 19: Port reset bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 20: Port reset bit 4 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 21: Port reset bit 5 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 22: Port reset bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 23: Port reset bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 24: Port reset bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 25: Port reset bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 26: Port reset bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 27: Port reset bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 28: Port reset bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 29: Port reset bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 30: Port reset bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 31: Port reset bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

BC

Port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
Toggle Fields.

CR0

Bit 0: Port cleat bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 1: Port cleat bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 2: Port cleat bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 3: Port cleat bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 4: Port cleat bit 4.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 5: Port cleat bit 5.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 6: Port cleat bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 7: Port cleat bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 8: Port cleat bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 9: Port cleat bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 10: Port cleat bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 11: Port cleat bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 12: Port cleat bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 13: Port cleat bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 14: Port cleat bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 15: Port cleat bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

TG

Port bit toggle register

Offset: 0x2C, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG15
w 		TG14
w 		TG13
w 		TG12
w 		TG11
w 		TG10
w 		TG9
w 		TG8
w 		TG7
w 		TG6
w 		TG5
w 		TG4
w 		TG3
w 		TG2
w 		TG1
w 		TG0
w
Toggle Fields.

TG0

Bit 0: Port toggle bit 0.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG1

Bit 1: Port toggle bit 1.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG2

Bit 2: Port toggle bit 2.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG3

Bit 3: Port toggle bit 3.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG4

Bit 4: Port toggle bit 4.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG5

Bit 5: Port toggle bit 5.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG6

Bit 6: Port toggle bit 6.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG7

Bit 7: Port toggle bit 7.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG8

Bit 8: Port toggle bit 8.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG9

Bit 9: Port toggle bit 9.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG10

Bit 10: Port toggle bit 10.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG11

Bit 11: Port toggle bit 11.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG12

Bit 12: Port toggle bit 12.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG13

Bit 13: Port toggle bit 13.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG14

Bit 14: Port toggle bit 14.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG15

Bit 15: Port toggle bit 15.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

GPIOF

0x48001400: General-purpose I/Os

160/160 fields covered. Toggle Registers.

CTL

GPIOF port control register

Offset: 0x0, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CTL15
rw 		CTL14
rw 		CTL13
rw 		CTL12
rw 		CTL11
rw 		CTL10
rw 		CTL9
rw 		CTL8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CTL7
rw 		CTL6
rw 		CTL5
rw 		CTL4
rw 		CTL3
rw 		CTL2
rw 		CTL1
rw 		CTL0
rw
Toggle Fields.

CTL0

Bits 0-1: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL1

Bits 2-3: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL2

Bits 4-5: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL3

Bits 6-7: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL4

Bits 8-9: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL5

Bits 10-11: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL6

Bits 12-13: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL7

Bits 14-15: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL8

Bits 16-17: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL9

Bits 18-19: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL10

Bits 20-21: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL11

Bits 22-23: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL12

Bits 24-25: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL13

Bits 26-27: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL14

Bits 28-29: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

CTL15

Bits 30-31: Port x configuration bits (y = 0..15).

Allowed values:
0: Input: Input mode (reset state)
1: Output: General purpose output mode
2: Alternate: Alternate function mode
3: Analog: Analog mode

OMODE

GPIO port output type register

Offset: 0x4, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OM15
rw 		OM14
rw 		OM13
rw 		OM12
rw 		OM11
rw 		OM10
rw 		OM9
rw 		OM8
rw 		OM7
rw 		OM6
rw 		OM5
rw 		OM4
rw 		OM3
rw 		OM2
rw 		OM1
rw 		OM0
rw
Toggle Fields.

OM0

Bit 0: Pin 0 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM1

Bit 1: Pin 1 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM2

Bit 2: Pin 2 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM3

Bit 3: Pin 3 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM4

Bit 4: Pin 4 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM5

Bit 5: Pin 5 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM6

Bit 6: Pin 6 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM7

Bit 7: Pin 7 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM8

Bit 8: Pin 8 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM9

Bit 9: Pin 9 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM10

Bit 10: Pin 10 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM11

Bit 11: Pin 11 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM12

Bit 12: Pin 12 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM13

Bit 13: Pin 13 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM14

Bit 14: Pin 14 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OM15

Bit 15: Pin 15 output mode.

Allowed values:
0: PushPull: Output push-pull (reset state)
1: OpenDrain: Output open-drain

OSPD

GPIO port output speed register

Offset: 0x8, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OSPD15
rw 		OSPD14
rw 		OSPD13
rw 		OSPD12
rw 		OSPD11
rw 		OSPD10
rw 		OSPD9
rw 		OSPD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OSPD7
rw 		OSPD6
rw 		OSPD5
rw 		OSPD4
rw 		OSPD3
rw 		OSPD2
rw 		OSPD1
rw 		OSPD0
rw
Toggle Fields.

OSPD0

Bits 0-1: Pin 0 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD1

Bits 2-3: Pin 1 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD2

Bits 4-5: Pin 2 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD3

Bits 6-7: Pin 3 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD4

Bits 8-9: Pin 4 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD5

Bits 10-11: Pin 5 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD6

Bits 12-13: Pin 6 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD7

Bits 14-15: Pin 7 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD8

Bits 16-17: Pin 8 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD9

Bits 18-19: Pin 9 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD10

Bits 20-21: Pin 10 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD11

Bits 22-23: Pin 11 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD12

Bits 24-25: Pin 12 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD13

Bits 26-27: Pin 13 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD14

Bits 28-29: Pin 14 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

OSPD15

Bits 30-31: Pin 15 output max speed bits.

Allowed values:
0: Speed2M: Max output speed 2 MHz
1: Speed10M: Max output speed 10 MHz
3: Speed50M: Max output speed 50 MHz

PUD

GPIO port pull-up/pull-down register

Offset: 0xC, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PUD15
rw 		PUD14
rw 		PUD13
rw 		PUD12
rw 		PUD11
rw 		PUD10
rw 		PUD9
rw 		PUD8
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PUD7
rw 		PUD6
rw 		PUD5
rw 		PUD4
rw 		PUD3
rw 		PUD2
rw 		PUD1
rw 		PUD0
rw
Toggle Fields.

PUD0

Bits 0-1: Pin 0 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD1

Bits 2-3: Pin 1 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD2

Bits 4-5: Pin 2 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD3

Bits 6-7: Pin 3 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD4

Bits 8-9: Pin 4 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD5

Bits 10-11: Pin 5 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD6

Bits 12-13: Pin 6 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD7

Bits 14-15: Pin 7 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD8

Bits 16-17: Pin 8 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD9

Bits 18-19: Pin 9 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD10

Bits 20-21: Pin 10 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD11

Bits 22-23: Pin 11 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD12

Bits 24-25: Pin 12 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD13

Bits 26-27: Pin 13 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD14

Bits 28-29: Pin 14 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

PUD15

Bits 30-31: Pin 15 pull-up or pull-down bits.

Allowed values:
0: Floating: No pull-up, pull-down (reset state)
1: PullUp: Pull-up
2: PullDown: Pull-down

ISTAT

GPIO port input data register

Offset: 0x10, reset: 0x00000000, access: read-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISTAT15
r 		ISTAT14
r 		ISTAT13
r 		ISTAT12
r 		ISTAT11
r 		ISTAT10
r 		ISTAT9
r 		ISTAT8
r 		ISTAT7
r 		ISTAT6
r 		ISTAT5
r 		ISTAT4
r 		ISTAT3
r 		ISTAT2
r 		ISTAT1
r 		ISTAT0
r
Toggle Fields.

ISTAT0

Bit 0: Port input data 0.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT1

Bit 1: Port input data 1.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT2

Bit 2: Port input data 2.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT3

Bit 3: Port input data 3.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT4

Bit 4: Port input data 4.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT5

Bit 5: Port input data 5.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT6

Bit 6: Port input data 6 .

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT7

Bit 7: Port input data 7.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT8

Bit 8: Port input data 8.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT9

Bit 9: Port input data 9.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT10

Bit 10: Port input data 10.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT11

Bit 11: Port input data 11.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT12

Bit 12: Port input data 12.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT13

Bit 13: Port input data 13.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT14

Bit 14: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

ISTAT15

Bit 15: Port input data 14.

Allowed values:
0: Low: Input is logic low
1: High: Input is logic high

OCTL

GPIO port output data register

Offset: 0x14, reset: 0x00000000, access: read-write

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OCTL15
rw 		OCTL14
rw 		OCTL13
rw 		OCTL12
rw 		OCTL11
rw 		OCTL10
rw 		OCTL9
rw 		OCTL8
rw 		OCTL7
rw 		OCTL6
rw 		OCTL5
rw 		OCTL4
rw 		OCTL3
rw 		OCTL2
rw 		OCTL1
rw 		OCTL0
rw
Toggle Fields.

OCTL0

Bit 0: Port output data 0.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL1

Bit 1: Port output data 1.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL2

Bit 2: Port output data 2.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL3

Bit 3: Port output data 3 .

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL4

Bit 4: Port output data 4.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL5

Bit 5: Port output data 5.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL6

Bit 6: Port output data 6.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL7

Bit 7: Port output data 7.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL8

Bit 8: Port output data 8.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL9

Bit 9: Port output data 9.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL10

Bit 10: Port output data 10.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL11

Bit 11: Port output data 11.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL12

Bit 12: Port output data 12.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL13

Bit 13: Port output data 13.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL14

Bit 14: Port output data 14.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

OCTL15

Bit 15: Port output data 15.

Allowed values:
0: Low: Set output to logic low
1: High: Set output to logic high

BOP

GPIO port bit set/reset register

Offset: 0x18, reset: 0x00000000, access: write-only

32/32 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BOP15
w 		BOP14
w 		BOP13
w 		BOP12
w 		BOP11
w 		BOP10
w 		BOP9
w 		BOP8
w 		BOP7
w 		BOP6
w 		BOP5
w 		BOP4
w 		BOP3
w 		BOP2
w 		BOP1
w 		BOP0
w
Toggle Fields.

BOP0

Bit 0: Port set bit 0.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP1

Bit 1: Port set bit 1.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP2

Bit 2: Port set bit 2.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP3

Bit 3: Port set bit 3.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP4

Bit 4: Port set bit 4.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP5

Bit 5: Port set bit 5.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP6

Bit 6: Port set bit 6.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP7

Bit 7: Port set bit 7.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP8

Bit 8: Port set bit 8.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP9

Bit 9: Port set bit 9.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP10

Bit 10: Port set bit 10.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP11

Bit 11: Port set bit 11.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP12

Bit 12: Port set bit 12.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP13

Bit 13: Port set bit 13.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP14

Bit 14: Port set bit 14.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

BOP15

Bit 15: Port set bit15.

Allowed values:
1: Set: Sets the corresponding OCTLx bit

CR0

Bit 16: Port reset bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 17: Port reset bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 18: Port reset bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 19: Port reset bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 20: Port reset bit 4 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 21: Port reset bit 5 .

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 22: Port reset bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 23: Port reset bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 24: Port reset bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 25: Port reset bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 26: Port reset bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 27: Port reset bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 28: Port reset bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 29: Port reset bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 30: Port reset bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 31: Port reset bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

BC

Port bit reset register

Offset: 0x28, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CR15
w 		CR14
w 		CR13
w 		CR12
w 		CR11
w 		CR10
w 		CR9
w 		CR8
w 		CR7
w 		CR6
w 		CR5
w 		CR4
w 		CR3
w 		CR2
w 		CR1
w 		CR0
w
Toggle Fields.

CR0

Bit 0: Port cleat bit 0.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR1

Bit 1: Port cleat bit 1.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR2

Bit 2: Port cleat bit 2.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR3

Bit 3: Port cleat bit 3.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR4

Bit 4: Port cleat bit 4.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR5

Bit 5: Port cleat bit 5.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR6

Bit 6: Port cleat bit 6.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR7

Bit 7: Port cleat bit 7.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR8

Bit 8: Port cleat bit 8.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR9

Bit 9: Port cleat bit 9.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR10

Bit 10: Port cleat bit 10.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR11

Bit 11: Port cleat bit 11.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR12

Bit 12: Port cleat bit 12.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR13

Bit 13: Port cleat bit 13.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR14

Bit 14: Port cleat bit 14.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

CR15

Bit 15: Port cleat bit 15.

Allowed values:
1: Reset: Resets the corresponding OCTLx bit

TG

Port bit toggle register

Offset: 0x2C, reset: 0x00000000, access: write-only

16/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TG15
w 		TG14
w 		TG13
w 		TG12
w 		TG11
w 		TG10
w 		TG9
w 		TG8
w 		TG7
w 		TG6
w 		TG5
w 		TG4
w 		TG3
w 		TG2
w 		TG1
w 		TG0
w
Toggle Fields.

TG0

Bit 0: Port toggle bit 0.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG1

Bit 1: Port toggle bit 1.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG2

Bit 2: Port toggle bit 2.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG3

Bit 3: Port toggle bit 3.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG4

Bit 4: Port toggle bit 4.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG5

Bit 5: Port toggle bit 5.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG6

Bit 6: Port toggle bit 6.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG7

Bit 7: Port toggle bit 7.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG8

Bit 8: Port toggle bit 8.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG9

Bit 9: Port toggle bit 9.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG10

Bit 10: Port toggle bit 10.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG11

Bit 11: Port toggle bit 11.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG12

Bit 12: Port toggle bit 12.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG13

Bit 13: Port toggle bit 13.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG14

Bit 14: Port toggle bit 14.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

TG15

Bit 15: Port toggle bit 15.

Allowed values:
1: Toggle: Toggles the corresponding OCTLx bit

I2C0

0x40005400: Inter integrated circuit

57/63 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRESET
rw 		SALT
rw 		PECTRANS
rw 		POAP
rw 		ACKEN
rw 		STOP
rw 		START
rw 		SS
rw 		GCEN
rw 		PECEN
rw 		ARPEN
rw 		SMBSEL
rw 		SMBEN
rw 		I2CEN
rw
Toggle Fields.

I2CEN

Bit 0: I2C peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBEN

Bit 1: SMBus/I2C mode switch.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBSEL

Bit 3: SMBusType Selection.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ARPEN

Bit 4: ARP protocol in SMBus switch.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

PECEN

Bit 5: PEC Calculation Switch.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

GCEN

Bit 6: Whether or not to response to a General Call (0x00).

Allowed values:
0: NotRespond: Slave won't respond to General Call
1: Respond: Slave will respond to General Call

SS

Bit 7: Whether to stretch SCL low when data is not ready in slave mode.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Generate a START condition on I2C bus.

Allowed values:
0: NoStart: START will not be sent
1: Start: START will be sent

STOP

Bit 9: Generate a STOP condition on I2C bus.

Allowed values:
0: NoStop: STOP will not be sent
1: Stop: STOP will be sent

ACKEN

Bit 10: Whether or not to send an ACK.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POAP

Bit 11: Position of ACK meaning.

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PECTRANS

Bit 12: PEC Transfer.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

SALT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SRESET

Bit 15: Software reset I2C.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CTL1

Control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMALST
rw 		DMAON
rw 		BUFIE
rw 		EVIE
rw 		ERRIE
rw 		I2CCLK
rw
Toggle Fields.

I2CCLK

Bits 0-6: I2C Peripheral clock frequency.

Allowed values: 2-72

ERRIE

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

EVIE

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

BUFIE

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TBE=1 or RBNE=1 does not generate any interrupt
1: Enabled: TBE=1 or RBNE=1 generates Event interrupt

DMAON

Bit 11: DMA mode switch.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA requests enabled

DMALST

Bit 12: Flag indicating DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

SADDR0

Own address register 0

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDFORMAT
rw 		ADDRESS
rw
Toggle Fields.

ADDRESS

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDFORMAT

Bit 15: Address mode for the I2C slave.

Allowed values:
0: Add7: 7-bit slave address (note that you'll need to shift the address by 1b)
1: Add10: 10-bit slave address

SADDR1

Own address register 1

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDRESS2
rw 		DUADEN
rw
Toggle Fields.

DUADEN

Bit 0: Dual-Address mode switch.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADDRESS2

Bits 1-7: Second I2C address for the slave in Dual-Address mode.

Allowed values: 0-127

DATA

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRB
rw
Toggle Fields.

TRB

Bits 0-7: Transmission or reception data buffer register.

Allowed values: 0-255

STAT0

Transfer status register 0

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALT
rw 		SMBTO
rw 		PECERR
rw 		OUERR
rw 		AERR
rw 		LOSTARB
rw 		BERR
rw 		TBE
r 		RBNE
r 		STPDET
r 		ADD10SEND
r 		BTC
r 		ADDSEND
r 		SBSEND
r
Toggle Fields.

SBSEND

Bit 0: START condition sent out in master mode.

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDSEND

Bit 1: Address is sent in master mode or received and matches in slave mode.

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTC

Bit 2: Byte transmission completed.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10SEND

Bit 3: Header of 10-bit address is sent in master mode.

Allowed values:
0: NoHeader: No header of 10-bit address is sent
1: Header: Header of 10-bit address is sent

STPDET

Bit 4: STOP condition detected in slave mode.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RBNE

Bit 6: TRBR is not Empty during receiving.

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty, software can read

TBE

Bit 7: I2C_DATA is Empty during transmitting.

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty, software can write

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

LOSTARB

Bit 9: Arbitration Lost in master mode.

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AERR

Bit 10: Acknowledge error.

Allowed values:
0: NoError: No acknowledge error
1: Error: Acknowledge error

OUERR

Bit 11: Over-run or under-run situation occurs in slave mode.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC error when receiving data.

Allowed values:
0: NoError: No PEC error
1: Error: PEC error

SMBTO

Bit 14: Timeout signal in SMBus mode.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained low for 25 ms

SMBALT

Bit 15: SMBus Alert status.

Allowed values:
0: NoAlert: SMBA not pulled down or no alert occured
1: Alert: SMBA pulled down or alert occurred

STAT1

Transfer status register 1

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PECV
r 		DUMODF
r 		HSTSMB
r 		DEFSMB
r 		RXGC
r 		TR
r 		I2CBSY
r 		MASTER
r
Toggle Fields.

MASTER

Bit 0: A flag indicating whether I2C block is in master or slave mode.

Allowed values:
0: Slave: Slave mode
1: Master: Master mode

I2CBSY

Bit 1: Busy flag.

Allowed values:
0: NotBusy: No I2C communication
1: Busy: I2C communication active

TR

Bit 2: Whether the I2C is a transmitter or a receiver.

Allowed values:
0: Receiver: Receiver
1: Transmitter: Transmitter

RXGC

Bit 4: General call address (00h) received.

Allowed values:
0: NotReceived: No general call address received
1: Received: General call address received

DEFSMB

Bit 5: SMBus host header in slave mode.

Allowed values:
0: NotReceived: Default address has not been received
1: Received: Default address has been received

HSTSMB

Bit 6: SMBus Host Header detected in slave mode.

Allowed values:
0: NoHeader: No SMBus host header detected
1: Header: SMBus host header detected

DUMODF

Bit 7: Dual Flag in slave mode.

Allowed values:
0: SADDR0: The address matches SADDR0
1: SADDR1: The address matches SADDR1

PECV

Bits 8-15: Packet Error Checking Value.

Allowed values: 0-127

CKCFG

Clock configure register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FAST
rw 		DTCY
rw 		CLKC
rw
Toggle Fields.

CLKC

Bits 0-11: I2C Clock control in master mode.

Allowed values: 0-4095

DTCY

Bit 14: Duty cycle in fast mode.

Allowed values:
0: Duty2: Duty cycle t_low/t_high = 2
1: Duty16_9: Duty cycle t_low/t_high = 16/9

FAST

Bit 15: I2C speed selection in master mode.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

RT

Rise time register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RISETIME
rw
Toggle Fields.

RISETIME

Bits 0-6: Maximum rise time in master mode.

Allowed values: 0-127

SAMCS

SAM Controland status register

Offset: 0x80, reset: 0x0000, access: read-write

6/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFR
rw 		RFF
rw 		TFR
rw 		TFF
rw 		RXF
rw 		TXF
rw 		RFRIE
rw 		RFFIE
rw 		TFRIE
rw 		TFFIE
rw 		STOEN
rw 		SAMEN
rw
Toggle Fields.

SAMEN

Bit 0: SAM_V interface enable.

Allowed values:
0: Disabled: SAM_V interface disabled
1: Enabled: SAM_V interface enabled

STOEN

Bit 1: SAM_V interface timeout detect enable.

Allowed values:
0: Disabled: SAM_V interface timeout detect disabled
1: Enabled: SAM_V interface timeout detect enabled

TFFIE

Bit 4: Txframe fall interrupt enable.

Allowed values:
0: Disabled: Txframe fall interrupt disabled
1: Enabled: Txframe fall interrupt enabled

TFRIE

Bit 5: Txframe rise interrupt enable.

Allowed values:
0: Disabled: Txframe rise interrupt disabled
1: Enabled: Txframe rise interrupt enabled

RFFIE

Bit 6: Rxframe fall interrupt enable.

Allowed values:
0: Disabled: Rxframe fall interrupt disabled
1: Enabled: Rxframe fall interrupt enabled

RFRIE

Bit 7: Rxframe rise interrupt enable.

Allowed values:
0: Disabled: Rxframe rise interrupt disabled
1: Enabled: Rxframe rise interrupt enabled

TXF

Bit 8: Level of Txframe signal.

RXF

Bit 9: Level of Rxframe signal.

TFF

Bit 12: Txframe fall flag.

TFR

Bit 13: Txframe rise flag.

RFF

Bit 14: Rxframe fall flag.

RFR

Bit 15: Rxframe rise flag.

I2C1

0x40005800: Inter integrated circuit

57/63 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRESET
rw 		SALT
rw 		PECTRANS
rw 		POAP
rw 		ACKEN
rw 		STOP
rw 		START
rw 		SS
rw 		GCEN
rw 		PECEN
rw 		ARPEN
rw 		SMBSEL
rw 		SMBEN
rw 		I2CEN
rw
Toggle Fields.

I2CEN

Bit 0: I2C peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBEN

Bit 1: SMBus/I2C mode switch.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBSEL

Bit 3: SMBusType Selection.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ARPEN

Bit 4: ARP protocol in SMBus switch.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

PECEN

Bit 5: PEC Calculation Switch.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

GCEN

Bit 6: Whether or not to response to a General Call (0x00).

Allowed values:
0: NotRespond: Slave won't respond to General Call
1: Respond: Slave will respond to General Call

SS

Bit 7: Whether to stretch SCL low when data is not ready in slave mode.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Generate a START condition on I2C bus.

Allowed values:
0: NoStart: START will not be sent
1: Start: START will be sent

STOP

Bit 9: Generate a STOP condition on I2C bus.

Allowed values:
0: NoStop: STOP will not be sent
1: Stop: STOP will be sent

ACKEN

Bit 10: Whether or not to send an ACK.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POAP

Bit 11: Position of ACK meaning.

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PECTRANS

Bit 12: PEC Transfer.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

SALT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SRESET

Bit 15: Software reset I2C.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CTL1

Control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMALST
rw 		DMAON
rw 		BUFIE
rw 		EVIE
rw 		ERRIE
rw 		I2CCLK
rw
Toggle Fields.

I2CCLK

Bits 0-6: I2C Peripheral clock frequency.

Allowed values: 2-72

ERRIE

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

EVIE

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

BUFIE

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TBE=1 or RBNE=1 does not generate any interrupt
1: Enabled: TBE=1 or RBNE=1 generates Event interrupt

DMAON

Bit 11: DMA mode switch.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA requests enabled

DMALST

Bit 12: Flag indicating DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

SADDR0

Own address register 0

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDFORMAT
rw 		ADDRESS
rw
Toggle Fields.

ADDRESS

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDFORMAT

Bit 15: Address mode for the I2C slave.

Allowed values:
0: Add7: 7-bit slave address (note that you'll need to shift the address by 1b)
1: Add10: 10-bit slave address

SADDR1

Own address register 1

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDRESS2
rw 		DUADEN
rw
Toggle Fields.

DUADEN

Bit 0: Dual-Address mode switch.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADDRESS2

Bits 1-7: Second I2C address for the slave in Dual-Address mode.

Allowed values: 0-127

DATA

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRB
rw
Toggle Fields.

TRB

Bits 0-7: Transmission or reception data buffer register.

Allowed values: 0-255

STAT0

Transfer status register 0

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALT
rw 		SMBTO
rw 		PECERR
rw 		OUERR
rw 		AERR
rw 		LOSTARB
rw 		BERR
rw 		TBE
r 		RBNE
r 		STPDET
r 		ADD10SEND
r 		BTC
r 		ADDSEND
r 		SBSEND
r
Toggle Fields.

SBSEND

Bit 0: START condition sent out in master mode.

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDSEND

Bit 1: Address is sent in master mode or received and matches in slave mode.

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTC

Bit 2: Byte transmission completed.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10SEND

Bit 3: Header of 10-bit address is sent in master mode.

Allowed values:
0: NoHeader: No header of 10-bit address is sent
1: Header: Header of 10-bit address is sent

STPDET

Bit 4: STOP condition detected in slave mode.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RBNE

Bit 6: TRBR is not Empty during receiving.

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty, software can read

TBE

Bit 7: I2C_DATA is Empty during transmitting.

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty, software can write

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

LOSTARB

Bit 9: Arbitration Lost in master mode.

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AERR

Bit 10: Acknowledge error.

Allowed values:
0: NoError: No acknowledge error
1: Error: Acknowledge error

OUERR

Bit 11: Over-run or under-run situation occurs in slave mode.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC error when receiving data.

Allowed values:
0: NoError: No PEC error
1: Error: PEC error

SMBTO

Bit 14: Timeout signal in SMBus mode.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained low for 25 ms

SMBALT

Bit 15: SMBus Alert status.

Allowed values:
0: NoAlert: SMBA not pulled down or no alert occured
1: Alert: SMBA pulled down or alert occurred

STAT1

Transfer status register 1

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PECV
r 		DUMODF
r 		HSTSMB
r 		DEFSMB
r 		RXGC
r 		TR
r 		I2CBSY
r 		MASTER
r
Toggle Fields.

MASTER

Bit 0: A flag indicating whether I2C block is in master or slave mode.

Allowed values:
0: Slave: Slave mode
1: Master: Master mode

I2CBSY

Bit 1: Busy flag.

Allowed values:
0: NotBusy: No I2C communication
1: Busy: I2C communication active

TR

Bit 2: Whether the I2C is a transmitter or a receiver.

Allowed values:
0: Receiver: Receiver
1: Transmitter: Transmitter

RXGC

Bit 4: General call address (00h) received.

Allowed values:
0: NotReceived: No general call address received
1: Received: General call address received

DEFSMB

Bit 5: SMBus host header in slave mode.

Allowed values:
0: NotReceived: Default address has not been received
1: Received: Default address has been received

HSTSMB

Bit 6: SMBus Host Header detected in slave mode.

Allowed values:
0: NoHeader: No SMBus host header detected
1: Header: SMBus host header detected

DUMODF

Bit 7: Dual Flag in slave mode.

Allowed values:
0: SADDR0: The address matches SADDR0
1: SADDR1: The address matches SADDR1

PECV

Bits 8-15: Packet Error Checking Value.

Allowed values: 0-127

CKCFG

Clock configure register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FAST
rw 		DTCY
rw 		CLKC
rw
Toggle Fields.

CLKC

Bits 0-11: I2C Clock control in master mode.

Allowed values: 0-4095

DTCY

Bit 14: Duty cycle in fast mode.

Allowed values:
0: Duty2: Duty cycle t_low/t_high = 2
1: Duty16_9: Duty cycle t_low/t_high = 16/9

FAST

Bit 15: I2C speed selection in master mode.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

RT

Rise time register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RISETIME
rw
Toggle Fields.

RISETIME

Bits 0-6: Maximum rise time in master mode.

Allowed values: 0-127

SAMCS

SAM Controland status register

Offset: 0x80, reset: 0x0000, access: read-write

6/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFR
rw 		RFF
rw 		TFR
rw 		TFF
rw 		RXF
rw 		TXF
rw 		RFRIE
rw 		RFFIE
rw 		TFRIE
rw 		TFFIE
rw 		STOEN
rw 		SAMEN
rw
Toggle Fields.

SAMEN

Bit 0: SAM_V interface enable.

Allowed values:
0: Disabled: SAM_V interface disabled
1: Enabled: SAM_V interface enabled

STOEN

Bit 1: SAM_V interface timeout detect enable.

Allowed values:
0: Disabled: SAM_V interface timeout detect disabled
1: Enabled: SAM_V interface timeout detect enabled

TFFIE

Bit 4: Txframe fall interrupt enable.

Allowed values:
0: Disabled: Txframe fall interrupt disabled
1: Enabled: Txframe fall interrupt enabled

TFRIE

Bit 5: Txframe rise interrupt enable.

Allowed values:
0: Disabled: Txframe rise interrupt disabled
1: Enabled: Txframe rise interrupt enabled

RFFIE

Bit 6: Rxframe fall interrupt enable.

Allowed values:
0: Disabled: Rxframe fall interrupt disabled
1: Enabled: Rxframe fall interrupt enabled

RFRIE

Bit 7: Rxframe rise interrupt enable.

Allowed values:
0: Disabled: Rxframe rise interrupt disabled
1: Enabled: Rxframe rise interrupt enabled

TXF

Bit 8: Level of Txframe signal.

RXF

Bit 9: Level of Rxframe signal.

TFF

Bit 12: Txframe fall flag.

TFR

Bit 13: Txframe rise flag.

RFF

Bit 14: Rxframe fall flag.

RFR

Bit 15: Rxframe rise flag.

I2C2

0x4000C000: Inter integrated circuit

57/63 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRESET
rw 		SALT
rw 		PECTRANS
rw 		POAP
rw 		ACKEN
rw 		STOP
rw 		START
rw 		SS
rw 		GCEN
rw 		PECEN
rw 		ARPEN
rw 		SMBSEL
rw 		SMBEN
rw 		I2CEN
rw
Toggle Fields.

I2CEN

Bit 0: I2C peripheral enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

SMBEN

Bit 1: SMBus/I2C mode switch.

Allowed values:
0: I2C: I2C Mode
1: SMBus: SMBus

SMBSEL

Bit 3: SMBusType Selection.

Allowed values:
0: Device: SMBus Device
1: Host: SMBus Host

ARPEN

Bit 4: ARP protocol in SMBus switch.

Allowed values:
0: Disabled: ARP disabled
1: Enabled: ARP enabled

PECEN

Bit 5: PEC Calculation Switch.

Allowed values:
0: Disabled: PEC calculation disabled
1: Enabled: PEC calculation enabled

GCEN

Bit 6: Whether or not to response to a General Call (0x00).

Allowed values:
0: NotRespond: Slave won't respond to General Call
1: Respond: Slave will respond to General Call

SS

Bit 7: Whether to stretch SCL low when data is not ready in slave mode.

Allowed values:
0: Enabled: Clock stretching enabled
1: Disabled: Clock stretching disabled

START

Bit 8: Generate a START condition on I2C bus.

Allowed values:
0: NoStart: START will not be sent
1: Start: START will be sent

STOP

Bit 9: Generate a STOP condition on I2C bus.

Allowed values:
0: NoStop: STOP will not be sent
1: Stop: STOP will be sent

ACKEN

Bit 10: Whether or not to send an ACK.

Allowed values:
0: NAK: No acknowledge returned
1: ACK: Acknowledge returned after a byte is received

POAP

Bit 11: Position of ACK meaning.

Allowed values:
0: Current: ACK bit controls the (N)ACK of the current byte being received
1: Next: ACK bit controls the (N)ACK of the next byte to be received

PECTRANS

Bit 12: PEC Transfer.

Allowed values:
0: Disabled: No PEC transfer
1: Enabled: PEC transfer

SALT

Bit 13: SMBus alert.

Allowed values:
0: Release: SMBA pin released high
1: Drive: SMBA pin driven low

SRESET

Bit 15: Software reset I2C.

Allowed values:
0: NotReset: I2C peripheral not under reset
1: Reset: I2C peripheral under reset

CTL1

Control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMALST
rw 		DMAON
rw 		BUFIE
rw 		EVIE
rw 		ERRIE
rw 		I2CCLK
rw
Toggle Fields.

I2CCLK

Bits 0-6: I2C Peripheral clock frequency.

Allowed values: 2-72

ERRIE

Bit 8: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

EVIE

Bit 9: Event interrupt enable.

Allowed values:
0: Disabled: Event interrupt disabled
1: Enabled: Event interrupt enabled

BUFIE

Bit 10: Buffer interrupt enable.

Allowed values:
0: Disabled: TBE=1 or RBNE=1 does not generate any interrupt
1: Enabled: TBE=1 or RBNE=1 generates Event interrupt

DMAON

Bit 11: DMA mode switch.

Allowed values:
0: Disabled: DMA requests disabled
1: Enabled: DMA requests enabled

DMALST

Bit 12: Flag indicating DMA last transfer.

Allowed values:
0: NotLast: Next DMA EOT is not the last transfer
1: Last: Next DMA EOT is the last transfer

SADDR0

Own address register 0

Offset: 0x8, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDFORMAT
rw 		ADDRESS
rw
Toggle Fields.

ADDRESS

Bits 0-9: Interface address.

Allowed values: 0-1023

ADDFORMAT

Bit 15: Address mode for the I2C slave.

Allowed values:
0: Add7: 7-bit slave address (note that you'll need to shift the address by 1b)
1: Add10: 10-bit slave address

SADDR1

Own address register 1

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADDRESS2
rw 		DUADEN
rw
Toggle Fields.

DUADEN

Bit 0: Dual-Address mode switch.

Allowed values:
0: Single: Single addressing mode
1: Dual: Dual addressing mode

ADDRESS2

Bits 1-7: Second I2C address for the slave in Dual-Address mode.

Allowed values: 0-127

DATA

Data register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRB
rw
Toggle Fields.

TRB

Bits 0-7: Transmission or reception data buffer register.

Allowed values: 0-255

STAT0

Transfer status register 0

Offset: 0x14, reset: 0x0000, access: Unspecified

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SMBALT
rw 		SMBTO
rw 		PECERR
rw 		OUERR
rw 		AERR
rw 		LOSTARB
rw 		BERR
rw 		TBE
r 		RBNE
r 		STPDET
r 		ADD10SEND
r 		BTC
r 		ADDSEND
r 		SBSEND
r
Toggle Fields.

SBSEND

Bit 0: START condition sent out in master mode.

Allowed values:
0: NoStart: No Start condition
1: Start: Start condition generated

ADDSEND

Bit 1: Address is sent in master mode or received and matches in slave mode.

Allowed values:
0: NotMatch: Adress mismatched or not received
1: Match: Received slave address matched with one of the enabled slave addresses

BTC

Bit 2: Byte transmission completed.

Allowed values:
0: NotFinished: Data byte transfer not done
1: Finished: Data byte transfer successful

ADD10SEND

Bit 3: Header of 10-bit address is sent in master mode.

Allowed values:
0: NoHeader: No header of 10-bit address is sent
1: Header: Header of 10-bit address is sent

STPDET

Bit 4: STOP condition detected in slave mode.

Allowed values:
0: NoStop: No Stop condition detected
1: Stop: Stop condition detected

RBNE

Bit 6: TRBR is not Empty during receiving.

Allowed values:
0: Empty: Data register empty
1: NotEmpty: Data register not empty, software can read

TBE

Bit 7: I2C_DATA is Empty during transmitting.

Allowed values:
0: NotEmpty: Data register not empty
1: Empty: Data register empty, software can write

BERR

Bit 8: Bus error.

Allowed values:
0: NoError: No misplaced Start or Stop condition
1: Error: Misplaced Start or Stop condition

LOSTARB

Bit 9: Arbitration Lost in master mode.

Allowed values:
0: NoLost: No Arbitration Lost detected
1: Lost: Arbitration Lost detected

AERR

Bit 10: Acknowledge error.

Allowed values:
0: NoError: No acknowledge error
1: Error: Acknowledge error

OUERR

Bit 11: Over-run or under-run situation occurs in slave mode.

Allowed values:
0: NoOverrun: No overrun/underrun occured
1: Overrun: Overrun/underrun occured

PECERR

Bit 12: PEC error when receiving data.

Allowed values:
0: NoError: No PEC error
1: Error: PEC error

SMBTO

Bit 14: Timeout signal in SMBus mode.

Allowed values:
0: NoTimeout: No Timeout error
1: Timeout: SCL remained low for 25 ms

SMBALT

Bit 15: SMBus Alert status.

Allowed values:
0: NoAlert: SMBA not pulled down or no alert occured
1: Alert: SMBA pulled down or alert occurred

STAT1

Transfer status register 1

Offset: 0x18, reset: 0x0000, access: read-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PECV
r 		DUMODF
r 		HSTSMB
r 		DEFSMB
r 		RXGC
r 		TR
r 		I2CBSY
r 		MASTER
r
Toggle Fields.

MASTER

Bit 0: A flag indicating whether I2C block is in master or slave mode.

Allowed values:
0: Slave: Slave mode
1: Master: Master mode

I2CBSY

Bit 1: Busy flag.

Allowed values:
0: NotBusy: No I2C communication
1: Busy: I2C communication active

TR

Bit 2: Whether the I2C is a transmitter or a receiver.

Allowed values:
0: Receiver: Receiver
1: Transmitter: Transmitter

RXGC

Bit 4: General call address (00h) received.

Allowed values:
0: NotReceived: No general call address received
1: Received: General call address received

DEFSMB

Bit 5: SMBus host header in slave mode.

Allowed values:
0: NotReceived: Default address has not been received
1: Received: Default address has been received

HSTSMB

Bit 6: SMBus Host Header detected in slave mode.

Allowed values:
0: NoHeader: No SMBus host header detected
1: Header: SMBus host header detected

DUMODF

Bit 7: Dual Flag in slave mode.

Allowed values:
0: SADDR0: The address matches SADDR0
1: SADDR1: The address matches SADDR1

PECV

Bits 8-15: Packet Error Checking Value.

Allowed values: 0-127

CKCFG

Clock configure register

Offset: 0x1C, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FAST
rw 		DTCY
rw 		CLKC
rw
Toggle Fields.

CLKC

Bits 0-11: I2C Clock control in master mode.

Allowed values: 0-4095

DTCY

Bit 14: Duty cycle in fast mode.

Allowed values:
0: Duty2: Duty cycle t_low/t_high = 2
1: Duty16_9: Duty cycle t_low/t_high = 16/9

FAST

Bit 15: I2C speed selection in master mode.

Allowed values:
0: Standard: Standard mode I2C
1: Fast: Fast mode I2C

RT

Rise time register

Offset: 0x20, reset: 0x0002, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RISETIME
rw
Toggle Fields.

RISETIME

Bits 0-6: Maximum rise time in master mode.

Allowed values: 0-127

SAMCS

SAM Controland status register

Offset: 0x80, reset: 0x0000, access: read-write

6/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RFR
rw 		RFF
rw 		TFR
rw 		TFF
rw 		RXF
rw 		TXF
rw 		RFRIE
rw 		RFFIE
rw 		TFRIE
rw 		TFFIE
rw 		STOEN
rw 		SAMEN
rw
Toggle Fields.

SAMEN

Bit 0: SAM_V interface enable.

Allowed values:
0: Disabled: SAM_V interface disabled
1: Enabled: SAM_V interface enabled

STOEN

Bit 1: SAM_V interface timeout detect enable.

Allowed values:
0: Disabled: SAM_V interface timeout detect disabled
1: Enabled: SAM_V interface timeout detect enabled

TFFIE

Bit 4: Txframe fall interrupt enable.

Allowed values:
0: Disabled: Txframe fall interrupt disabled
1: Enabled: Txframe fall interrupt enabled

TFRIE

Bit 5: Txframe rise interrupt enable.

Allowed values:
0: Disabled: Txframe rise interrupt disabled
1: Enabled: Txframe rise interrupt enabled

RFFIE

Bit 6: Rxframe fall interrupt enable.

Allowed values:
0: Disabled: Rxframe fall interrupt disabled
1: Enabled: Rxframe fall interrupt enabled

RFRIE

Bit 7: Rxframe rise interrupt enable.

Allowed values:
0: Disabled: Rxframe rise interrupt disabled
1: Enabled: Rxframe rise interrupt enabled

TXF

Bit 8: Level of Txframe signal.

RXF

Bit 9: Level of Rxframe signal.

TFF

Bit 12: Txframe fall flag.

TFR

Bit 13: Txframe rise flag.

RFF

Bit 14: Rxframe fall flag.

RFR

Bit 15: Rxframe rise flag.

NVIC

0xE000E100: Nested Vectored Interrupt Controller

0/80 fields covered. Toggle Registers.

ISER

Interrupt Set Enable Register

Offset: 0x0, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETENA
rw
Toggle Fields.

SETENA

Bits 0-31: SETENA.

ICER

Interrupt Clear Enable Register

Offset: 0x80, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRENA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRENA
rw
Toggle Fields.

CLRENA

Bits 0-31: CLRENA.

ISPR

Interrupt Set-Pending Register

Offset: 0x100, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SETPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SETPEND
rw
Toggle Fields.

SETPEND

Bits 0-31: SETPEND.

ICPR

Interrupt Clear-Pending Register

Offset: 0x180, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CLRPEND
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CLRPEND
rw
Toggle Fields.

CLRPEND

Bits 0-31: CLRPEND.

IABR

Interrupt Active bit Register

Offset: 0x200, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IABR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IABR
rw
Toggle Fields.

IABR

Bits 0-31: IABR.

IPR0

Interrupt Priority Register 0

Offset: 0x300, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_00
rw
Toggle Fields.

PRI_00

Bits 0-7: PRI_00.

IPR1

Interrupt Priority Register 1

Offset: 0x301, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_01
rw
Toggle Fields.

PRI_01

Bits 0-7: PRI_01.

IPR2

Interrupt Priority Register 2

Offset: 0x302, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_02
rw
Toggle Fields.

PRI_02

Bits 0-7: PRI_02.

IPR3

Interrupt Priority Register 3

Offset: 0x303, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_03
rw
Toggle Fields.

PRI_03

Bits 0-7: PRI_03.

IPR4

Interrupt Priority Register 4

Offset: 0x304, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_04
rw
Toggle Fields.

PRI_04

Bits 0-7: PRI_04.

IPR5

Interrupt Priority Register 5

Offset: 0x305, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_05
rw
Toggle Fields.

PRI_05

Bits 0-7: PRI_05.

IPR6

Interrupt Priority Register 6

Offset: 0x306, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_06
rw
Toggle Fields.

PRI_06

Bits 0-7: PRI_06.

IPR7

Interrupt Priority Register 7

Offset: 0x307, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_07
rw
Toggle Fields.

PRI_07

Bits 0-7: PRI_07.

IPR8

Interrupt Priority Register 8

Offset: 0x308, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_08
rw
Toggle Fields.

PRI_08

Bits 0-7: PRI_08.

IPR9

Interrupt Priority Register 9

Offset: 0x309, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_09
rw
Toggle Fields.

PRI_09

Bits 0-7: PRI_09.

IPR10

Interrupt Priority Register 10

Offset: 0x30A, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_10
rw
Toggle Fields.

PRI_10

Bits 0-7: PRI_10.

IPR11

Interrupt Priority Register 11

Offset: 0x30B, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_11
rw
Toggle Fields.

PRI_11

Bits 0-7: PRI_11.

IPR12

Interrupt Priority Register 12

Offset: 0x30C, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_12
rw
Toggle Fields.

PRI_12

Bits 0-7: PRI_12.

IPR13

Interrupt Priority Register 13

Offset: 0x30D, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_13
rw
Toggle Fields.

PRI_13

Bits 0-7: PRI_13.

IPR14

Interrupt Priority Register 14

Offset: 0x30E, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_14
rw
Toggle Fields.

PRI_14

Bits 0-7: PRI_14.

IPR15

Interrupt Priority Register 15

Offset: 0x30F, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_15
rw
Toggle Fields.

PRI_15

Bits 0-7: PRI_15.

IPR16

Interrupt Priority Register 16

Offset: 0x310, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_16
rw
Toggle Fields.

PRI_16

Bits 0-7: PRI_16.

IPR17

Interrupt Priority Register 17

Offset: 0x311, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_17
rw
Toggle Fields.

PRI_17

Bits 0-7: PRI_17.

IPR18

Interrupt Priority Register 18

Offset: 0x312, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_18
rw
Toggle Fields.

PRI_18

Bits 0-7: PRI_18.

IPR19

Interrupt Priority Register 19

Offset: 0x313, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_19
rw
Toggle Fields.

PRI_19

Bits 0-7: PRI_19.

IPR20

Interrupt Priority Register 20

Offset: 0x314, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_20
rw
Toggle Fields.

PRI_20

Bits 0-7: PRI_20.

IPR21

Interrupt Priority Register 21

Offset: 0x315, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_21
rw
Toggle Fields.

PRI_21

Bits 0-7: PRI_21.

IPR22

Interrupt Priority Register 22

Offset: 0x316, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_22
rw
Toggle Fields.

PRI_22

Bits 0-7: PRI_22.

IPR23

Interrupt Priority Register 23

Offset: 0x317, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_23
rw
Toggle Fields.

PRI_23

Bits 0-7: PRI_23.

IPR24

Interrupt Priority Register 24

Offset: 0x318, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_24
rw
Toggle Fields.

PRI_24

Bits 0-7: PRI_24.

IPR25

Interrupt Priority Register 25

Offset: 0x319, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_25
rw
Toggle Fields.

PRI_25

Bits 0-7: PRI_25.

IPR26

Interrupt Priority Register 26

Offset: 0x31A, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_26
rw
Toggle Fields.

PRI_26

Bits 0-7: PRI_26.

IPR27

Interrupt Priority Register 27

Offset: 0x31B, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_27
rw
Toggle Fields.

PRI_27

Bits 0-7: PRI_27.

IPR28

Interrupt Priority Register 28

Offset: 0x31C, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_28
rw
Toggle Fields.

PRI_28

Bits 0-7: PRI_28.

IPR29

Interrupt Priority Register 29

Offset: 0x31D, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_29
rw
Toggle Fields.

PRI_29

Bits 0-7: PRI_29.

IPR30

Interrupt Priority Register 30

Offset: 0x31E, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_30
rw
Toggle Fields.

PRI_30

Bits 0-7: PRI_30.

IPR31

Interrupt Priority Register 31

Offset: 0x31F, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_31
rw
Toggle Fields.

PRI_31

Bits 0-7: PRI_31.

IPR32

Interrupt Priority Register 32

Offset: 0x320, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_32
rw
Toggle Fields.

PRI_32

Bits 0-7: PRI_32.

IPR33

Interrupt Priority Register 33

Offset: 0x321, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_33
rw
Toggle Fields.

PRI_33

Bits 0-7: PRI_33.

IPR34

Interrupt Priority Register 34

Offset: 0x322, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_34
rw
Toggle Fields.

PRI_34

Bits 0-7: PRI_34.

IPR35

Interrupt Priority Register 35

Offset: 0x323, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_35
rw
Toggle Fields.

PRI_35

Bits 0-7: PRI_35.

IPR36

Interrupt Priority Register 36

Offset: 0x324, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_36
rw
Toggle Fields.

PRI_36

Bits 0-7: PRI_36.

IPR37

Interrupt Priority Register 37

Offset: 0x325, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_37
rw
Toggle Fields.

PRI_37

Bits 0-7: PRI_37.

IPR38

Interrupt Priority Register 38

Offset: 0x326, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_38
rw
Toggle Fields.

PRI_38

Bits 0-7: PRI_38.

IPR39

Interrupt Priority Register 39

Offset: 0x327, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_39
rw
Toggle Fields.

PRI_39

Bits 0-7: PRI_39.

IPR40

Interrupt Priority Register 40

Offset: 0x328, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_40
rw
Toggle Fields.

PRI_40

Bits 0-7: PRI_40.

IPR41

Interrupt Priority Register 41

Offset: 0x329, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_41
rw
Toggle Fields.

PRI_41

Bits 0-7: PRI_41.

IPR42

Interrupt Priority Register 42

Offset: 0x32A, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_42
rw
Toggle Fields.

PRI_42

Bits 0-7: PRI_42.

IPR43

Interrupt Priority Register 43

Offset: 0x32B, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_43
rw
Toggle Fields.

PRI_43

Bits 0-7: PRI_43.

IPR44

Interrupt Priority Register 44

Offset: 0x32C, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_44
rw
Toggle Fields.

PRI_44

Bits 0-7: PRI_44.

IPR45

Interrupt Priority Register 45

Offset: 0x32D, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_45
rw
Toggle Fields.

PRI_45

Bits 0-7: PRI_45.

IPR46

Interrupt Priority Register 46

Offset: 0x32E, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_46
rw
Toggle Fields.

PRI_46

Bits 0-7: PRI_46.

IPR47

Interrupt Priority Register 47

Offset: 0x32F, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_47
rw
Toggle Fields.

PRI_47

Bits 0-7: PRI_47.

IPR48

Interrupt Priority Register 48

Offset: 0x330, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_48
rw
Toggle Fields.

PRI_48

Bits 0-7: PRI_48.

IPR49

Interrupt Priority Register 49

Offset: 0x331, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_49
rw
Toggle Fields.

PRI_49

Bits 0-7: PRI_49.

IPR50

Interrupt Priority Register 50

Offset: 0x332, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_50
rw
Toggle Fields.

PRI_50

Bits 0-7: PRI_50.

IPR51

Interrupt Priority Register 51

Offset: 0x333, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_51
rw
Toggle Fields.

PRI_51

Bits 0-7: PRI_51.

IPR52

Interrupt Priority Register 52

Offset: 0x334, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_52
rw
Toggle Fields.

PRI_52

Bits 0-7: PRI_52.

IPR53

Interrupt Priority Register 53

Offset: 0x335, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_53
rw
Toggle Fields.

PRI_53

Bits 0-7: PRI_53.

IPR54

Interrupt Priority Register 54

Offset: 0x336, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_54
rw
Toggle Fields.

PRI_54

Bits 0-7: PRI_54.

IPR55

Interrupt Priority Register 55

Offset: 0x337, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_55
rw
Toggle Fields.

PRI_55

Bits 0-7: PRI_55.

IPR56

Interrupt Priority Register 56

Offset: 0x338, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_56
rw
Toggle Fields.

PRI_56

Bits 0-7: PRI_56.

IPR57

Interrupt Priority Register 57

Offset: 0x339, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_57
rw
Toggle Fields.

PRI_57

Bits 0-7: PRI_57.

IPR58

Interrupt Priority Register 58

Offset: 0x33A, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_58
rw
Toggle Fields.

PRI_58

Bits 0-7: PRI_58.

IPR59

Interrupt Priority Register 59

Offset: 0x33B, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_59
rw
Toggle Fields.

PRI_59

Bits 0-7: PRI_59.

IPR60

Interrupt Priority Register 60

Offset: 0x33C, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_60
rw
Toggle Fields.

PRI_60

Bits 0-7: PRI_60.

IPR61

Interrupt Priority Register 61

Offset: 0x33D, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_61
rw
Toggle Fields.

PRI_61

Bits 0-7: PRI_61.

IPR62

Interrupt Priority Register 62

Offset: 0x33E, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_62
rw
Toggle Fields.

PRI_62

Bits 0-7: PRI_62.

IPR63

Interrupt Priority Register 63

Offset: 0x33F, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_63
rw
Toggle Fields.

PRI_63

Bits 0-7: PRI_63.

IPR64

Interrupt Priority Register 64

Offset: 0x340, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_64
rw
Toggle Fields.

PRI_64

Bits 0-7: PRI_64.

IPR65

Interrupt Priority Register 65

Offset: 0x341, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_65
rw
Toggle Fields.

PRI_65

Bits 0-7: PRI_65.

IPR66

Interrupt Priority Register 66

Offset: 0x342, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_66
rw
Toggle Fields.

PRI_66

Bits 0-7: PRI_66.

IPR67

Interrupt Priority Register 67

Offset: 0x343, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_67
rw
Toggle Fields.

PRI_67

Bits 0-7: PRI_67.

IPR68

Interrupt Priority Register 68

Offset: 0x344, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_68
rw
Toggle Fields.

PRI_68

Bits 0-7: PRI_68.

IPR69

Interrupt Priority Register 69

Offset: 0x345, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_69
rw
Toggle Fields.

PRI_69

Bits 0-7: PRI_69.

IPR70

Interrupt Priority Register 70

Offset: 0x346, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_70
rw
Toggle Fields.

PRI_70

Bits 0-7: PRI_70.

IPR71

Interrupt Priority Register 71

Offset: 0x347, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_71
rw
Toggle Fields.

PRI_71

Bits 0-7: PRI_71.

IPR72

Interrupt Priority Register 72

Offset: 0x348, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_72
rw
Toggle Fields.

PRI_72

Bits 0-7: PRI_72.

IPR73

Interrupt Priority Register 73

Offset: 0x349, reset: 0x00, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PRI_73
rw
Toggle Fields.

PRI_73

Bits 0-7: PRI_73.

STIR

Software Trigger Interrupt Register

Offset: 0xE00, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
STIR
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STIR
w
Toggle Fields.

STIR

Bits 0-31: STIR.

OPA_IVREF

0x40007C00: OPA_IVREF

50/50 fields covered. Toggle Registers.

OPA_CTL

OPA control register

Offset: 0x5C, reset: 0x00010101, access: Unspecified

29/29 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OPA2CALOUT
rw 		OPA1CALOUT
rw 		OPA0CALOUT
rw 		OPA_RANGE
rw 		S4OPA1
rw 		OPA2LPM
rw 		OPA2CAL_H
rw 		OPA2CAL_L
rw 		S3OPA2
rw 		S2OPA2
rw 		S1OPA2
rw 		T3OPA2
rw 		OPA2PD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OPA1LPM
rw 		OPA1CAL_H
rw 		OPA1CAL_L
rw 		S3OPA1
rw 		S2OPA1
rw 		S1OPA1
rw 		T3OPA1
rw 		OPA1PD
rw 		OPA0LPM
rw 		OPA0CAL_H
rw 		OPA0CAL_L
rw 		S3OPA0
rw 		S2OPA0
rw 		S1OPA0
rw 		T3OPA0
rw 		OPA0PD
rw
Toggle Fields.

OPA0PD

Bit 0: OPA0 power down.

Allowed values:
0: Enabled: OPA enabled
1: Disabled: OPA disabled

T3OPA0

Bit 1: T3 switch enable for OPA0.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S1OPA0

Bit 2: S1 switch enable for OPA0.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S2OPA0

Bit 3: S2 switch enable for OPA0.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S3OPA0

Bit 4: S3 switch enable for OPA0.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

OPA0CAL_L

Bit 5: OPA0 offset calibration for P diff.

Allowed values:
0: Disabled: Offset calibration for P diff disabled
1: Enabled: Offset calibration for P diff enabled

OPA0CAL_H

Bit 6: OPA0 offset calibration for N diff.

Allowed values:
0: Disabled: Offset calibration for N diff disabled
1: Enabled: Offset calibration for N diff enabled

OPA0LPM

Bit 7: OPA0 low power mode.

Allowed values:
0: Disabled: Low power mode disabled
1: Enabled: Low power mode enabled

OPA1PD

Bit 8: OPA1 power down.

Allowed values:
0: Enabled: OPA enabled
1: Disabled: OPA disabled

T3OPA1

Bit 9: T3 switch enable for OPA1.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S1OPA1

Bit 10: S1 switch enable for OPA1.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S2OPA1

Bit 11: S2 switch enable for OPA1.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S3OPA1

Bit 12: S3 switch enable for OPA1.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

OPA1CAL_L

Bit 13: OPA1 offset calibration for P diff.

Allowed values:
0: Disabled: Offset calibration for P diff disabled
1: Enabled: Offset calibration for P diff enabled

OPA1CAL_H

Bit 14: OPA1 offset calibration for N diff.

Allowed values:
0: Disabled: Offset calibration for N diff disabled
1: Enabled: Offset calibration for N diff enabled

OPA1LPM

Bit 15: OPA1 low power mode.

Allowed values:
0: Disabled: Low power mode disabled
1: Enabled: Low power mode enabled

OPA2PD

Bit 16: OPA2 power down.

Allowed values:
0: Enabled: OPA enabled
1: Disabled: OPA disabled

T3OPA2

Bit 17: T3 switch enable for OPA2.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S1OPA2

Bit 18: S1 switch enable for OPA2.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S2OPA2

Bit 19: S2 switch enable for OPA2.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

S3OPA2

Bit 20: S3 switch enable for OPA2.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

OPA2CAL_L

Bit 21: OPA2 offset calibration for P diff.

Allowed values:
0: Disabled: Offset calibration for P diff disabled
1: Enabled: Offset calibration for P diff enabled

OPA2CAL_H

Bit 22: OPA2 offset calibration for N diff.

Allowed values:
0: Disabled: Offset calibration for N diff disabled
1: Enabled: Offset calibration for N diff enabled

OPA2LPM

Bit 23: OPA2 low power mode.

Allowed values:
0: Disabled: Low power mode disabled
1: Enabled: Low power mode enabled

S4OPA1

Bit 27: S4 switch enable for OPA1.

Allowed values:
0: Opened: Switch opened
1: Closed: Switch closed

OPA_RANGE

Bit 28: Power supply range.

Allowed values:
0: Low: Low range, < 3.3 V
1: High: High range, > 3.3 V

OPA0CALOUT

Bit 29: OPA0 calibration output.

Allowed values:
0: NotTrimmed: The offset is not trimmed
1: Trimmed: The offset is trimmed, in calibration mode

OPA1CALOUT

Bit 30: OPA1 calibration output.

Allowed values:
0: NotTrimmed: The offset is not trimmed
1: Trimmed: The offset is trimmed, in calibration mode

OPA2CALOUT

Bit 31: OPA2 calibration output.

Allowed values:
0: NotTrimmed: The offset is not trimmed
1: Trimmed: The offset is trimmed, in calibration mode

OPA_BT

OPA offset trimming for normal mode register

Offset: 0x60, reset: 0x00000000, access: Unspecified

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OT_USER
rw 		OA2_TRIM_HIGH
rw 		OA2_TRIM_LOW
rw 		OA1_TRIM_HIGH
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA1_TRIM_HIGH
rw 		OA1_TRIM_LOW
rw 		OA0_TRIM_HIGH
rw 		OA0_TRIM_LOW
rw
Toggle Fields.

OA0_TRIM_LOW

Bits 0-4: OPA0, normal mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA0_TRIM_HIGH

Bits 5-9: OPA0, normal mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

OA1_TRIM_LOW

Bits 10-14: OPA1, normal mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA1_TRIM_HIGH

Bits 15-19: OPA1, normal mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

OA2_TRIM_LOW

Bits 20-24: OPA2, normal mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA2_TRIM_HIGH

Bits 25-29: OPA2, normal mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

OT_USER

Bit 31: user programmed trimming value.

Allowed values:
0: Factory: Trim with factory-default values
1: User: Trim with user-programmed values

OPA_LPBT

OPA offset trimming for low power mode register

Offset: 0x64, reset: 0x00000000, access: Unspecified

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OA2_TRIM_LP_HIGH
rw 		OA2_TRIM_LP_LOW
rw 		OA1_TRIM_LP_HIGH
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OA1_TRIM_LP_HIGH
rw 		OA1_TRIM_LP_LOW
rw 		OA0_TRIM_LP_HIGH
rw 		OA0_TRIM_LP_LOW
rw
Toggle Fields.

OA0_TRIM_LP_LOW

Bits 0-4: OPA0, low power mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA0_TRIM_LP_HIGH

Bits 5-9: OPA0, low power mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

OA1_TRIM_LP_LOW

Bits 10-14: OPA1, low power mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA1_TRIM_LP_HIGH

Bits 15-19: OPA1, low power mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

OA2_TRIM_LP_LOW

Bits 20-24: OPA2, low power mode 5-bit offset trim value for PMOS pairs.

Allowed values: 0-31

OA2_TRIM_LP_HIGH

Bits 25-29: OPA2, low power mode 5-bit offset trim value for NMOS pairs.

Allowed values: 0-31

IVREF_CTL

IVREF control register

Offset: 0x300, reset: 0x10000F00, access: Unspecified

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
VREN
rw 		DECAP
rw 		VPT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CREN
rw 		SSEL
rw 		CPT
rw 		SCMOD
rw 		CSDT
rw
Toggle Fields.

CSDT

Bits 0-5: Current step data.

Allowed values: 0-63

SCMOD

Bit 7: Sink current mode.

Allowed values:
0: Source: Source current
1: Sink: Sink current

CPT

Bits 8-12: Current precision trim.

Allowed values:
0: Minus15: Trim -15%
1: Minus14: Trim -14%
2: Minus13: Trim -13%
3: Minus12: Trim -12%
4: Minus11: Trim -11%
5: Minus10: Trim -10%
6: Minus9: Trim -9%
7: Minus8: Trim -8%
8: Minus7: Trim -7%
9: Minus6: Trim -6%
10: Minus5: Trim -5%
11: Minus4: Trim -4%
12: Minus3: Trim -3%
13: Minus2: Trim -2%
14: Minus1: Trim -1%
15: Zero: Trim 0%
16: Plus1: Trim +1%
17: Plus2: Trim +2%
18: Plus3: Trim +3%
19: Plus4: Trim +4%
20: Plus5: Trim +5%
21: Plus6: Trim +6%
22: Plus7: Trim +7%
23: Plus8: Trim +8%
24: Plus9: Trim +9%
25: Plus10: Trim +10%
26: Plus11: Trim +11%
27: Plus12: Trim +12%
28: Plus13: Trim +13%
29: Plus14: Trim +14%
30: Plus15: Trim +15%
31: Plus16: Trim +16%

SSEL

Bit 14: Step selection.

Allowed values:
0: LowPower: Low power, 1uA step
1: HighPower: Low power, 8uA step

CREN

Bit 15: Current reference enable.

Allowed values:
0: Disabled: Disable current reference
1: Enabled: Enable current reference

VPT

Bits 24-28: Voltage precision tirm.

Allowed values:
0: Minus6_4: Trim -6.4%
1: Minus6_0: Trim -6.0%
2: Minus5_6: Trim -5.6%
3: Minus5_2: Trim -5.2%
4: Minus4_8: Trim -4.8%
5: Minus4_4: Trim -4.4%
6: Minus4_0: Trim -4.0%
7: Minus3_6: Trim -3.6%
8: Minus3_2: Trim -3.2%
9: Minus2_8: Trim -2.8%
10: Minus2_4: Trim -2.4%
11: Minus2_0: Trim -2.0%
12: Minus1_6: Trim -1.6%
13: Minus1_2: Trim -1.2%
14: Minus0_8: Trim -0.8%
15: Minus0_4: Trim -0.4%
16: Zero: Trim 0%
17: Plus0_4: Trim +0.4%
18: Plus0_8: Trim +0.8%
19: Plus1_2: Trim +1.2%
20: Plus1_6: Trim +1.6%
22: Plus2_4: Trim +2.4%
21: Plus2_0: Trim +2.0%
23: Plus2_8: Trim +2.8%
24: Plus3_2: Trim +3.2%
25: Plus3_6: Trim +3.6%
26: Plus4_0: Trim +4.0%
27: Plus4_4: Trim +4.4%
28: Plus4_8: Trim +4.8%
29: Plus5_2: Trim +5.2%
30: Plus5_6: Trim +5.6%
31: Plus6_0: Trim +6.0%

DECAP

Bit 30: Disconnect external capacitor.

Allowed values:
0: Connected: External capacitor connected
1: Disconnected: External capacitor disonnected

VREN

Bit 31: Voltage reference enable.

Allowed values:
0: Disabled: Disable voltage reference
1: Enabled: Enable voltage reference

PMU

0x40007000: Power management unit

12/12 fields covered. Toggle Registers.

CTL

power control register

Offset: 0x0, reset: 0x00000000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BKPWEN
rw 		LVDT
rw 		LVDEN
rw 		STBRST
rw 		WURST
rw 		STBMOD
rw 		LDOLP
rw
Toggle Fields.

LDOLP

Bit 0: LDO Low Power Mode.

Allowed values:
0: Normal: LDO operates normally during Deepsleep mode
1: LowPower: LDO in low-power mode during Deepsleep mode

STBMOD

Bit 1: Standby Mode.

Allowed values:
0: DeepSleep: Enter Deep-sleep mode when the CPU enters deepsleep
1: Standby: Enter Standby mode when the CPU enters deepsleep

WURST

Bit 2: Wakeup Flag Reset.

Allowed values:
1: Clear: Clear the wakeup flag

STBRST

Bit 3: Standby Flag Reset.

Allowed values:
1: Clear: Clear the standby flag

LVDEN

Bit 4: Low Voltage Detector Enable.

Allowed values:
0: Disabled: Low voltage detector disabled
1: Enabled: Low voltage detector enabled

LVDT

Bits 5-7: Low Voltage Detector Threshold.

Allowed values:
0: V2_2: 2.2 V
1: V2_3: 2.3 V
2: V2_4: 2.4 V
3: V2_5: 2.5 V
4: V2_6: 2.6 V
5: V2_7: 2.7 V
6: V2_8: 2.8 V
7: V2_9: 2.9 V

BKPWEN

Bit 8: Backup Domain Write Enable.

Allowed values:
0: Disabled: Access to backup domain registers disabled
1: Enabled: Access to backup domain registers enabled

CS

power control/status register

Offset: 0x4, reset: 0x00000000, access: Unspecified

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WUPEN1
rw 		WUPEN0
rw 		LVDF
r 		STBF
r 		WUF
r
Toggle Fields.

WUF

Bit 0: Wakeup flag.

Allowed values:
0: NoWakeupEvent: No wakeup event occurred
1: WakeupEvent: A wakeup event was received from the WKUP pin or from the RTC wakeup event (RTC Tamper event, RTC TimeStamp event or RTC alarm)

STBF

Bit 1: Standby flag.

Allowed values:
0: NoStandbyEvent: Device has not been in Standby mode
1: StandbyEvent: Device has been in Standby mode

LVDF

Bit 2: Low Voltage Detector Status Flag.

Allowed values:
0: AboveThreshold: VDD is higher than the LVD threshold
1: BelowThreshold: VDD is lower than or equal to the LVD threshold

WUPEN0

Bit 8: Enable WKUP pin.

Allowed values:
0: Disabled: WKUP pin 0 is used for general purpose I/Os. An event on the WKUP pin 0 does not wakeup the device from Standby mode
1: Enabled: WKUP pin 0 is used for wakeup from Standby mode and forced in input pull down configuration (rising edge on WKUP pin 0 wakes-up the system from Standby mode)

WUPEN1

Bit 9: WKUPN1 Pin Enable.

Allowed values:
0: Disabled: WKUP pin 1 is used for general purpose I/Os. An event on the WKUP pin 1 does not wakeup the device from Standby mode
1: Enabled: WKUP pin 1 is used for wakeup from Standby mode and forced in input pull down configuration (rising edge on WKUP pin 1 wakes-up the system from Standby mode)

RCU

0x40021000: Reset and clock unit

142/142 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x00000083, access: Unspecified

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLSTB
r 		PLLEN
rw 		CKMEN
rw 		HXTALBPS
rw 		HXTALSTB
r 		HXTALEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IRC8MCALIB
r 		IRC8MADJ
rw 		IRC8MSTB
r 		IRC8MEN
rw
Toggle Fields.

IRC8MEN

Bit 0: Internal High Speed oscillator Enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

IRC8MSTB

Bit 1: IRC8M High Speed Internal Oscillator stabilization Flag.

Allowed values:
0: NotReady: IRC8M is not stable
1: Ready: IRC8M is stable

IRC8MADJ

Bits 3-7: High Speed Internal Oscillator clock trim adjust value.

Allowed values: 0-31

IRC8MCALIB

Bits 8-15: High Speed Internal Oscillator calibration value register.

Allowed values: 0-255

HXTALEN

Bit 16: External High Speed oscillator Enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

HXTALSTB

Bit 17: External crystal oscillator (HXTAL) clock stabilization flag.

Allowed values:
0: NotReady: HXTAL is not stable
1: Ready: HXTAL is stable

HXTALBPS

Bit 18: External crystal oscillator (HXTAL) clock bypass mode enable.

Allowed values:
0: NotBypassed: HXTAL crystal oscillator not bypassed
1: Bypassed: HXTAL crystal oscillator bypassed with external clock

CKMEN

Bit 19: HXTAL Clock Monitor Enable.

Allowed values:
0: Off: Clock monitor disabled
1: On: Clock monitor enabled

PLLEN

Bit 24: PLL enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

PLLSTB

Bit 25: PLL Clock Stabilization Flag.

Allowed values:
0: NotReady: PLL is not stable
1: Ready: PLL is stable

CFG0

Clock configuration register 0 (RCU_CFG0)

Offset: 0x4, reset: 0x00000000, access: Unspecified

13/13 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PLLDV
rw 		CKOUTDIV
rw 		PLLMF_MSB
rw 		CKOUTSEL
rw 		PLLMF
rw 		PLLPREDV
rw 		PLLSEL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADCPSC
rw 		APB2PSC
rw 		APB1PSC
rw 		AHBPSC
rw 		SCSS
r 		SCS
rw
Toggle Fields.

SCS

Bits 0-1: System clock switch.

Allowed values:
0: IRC8M: IRC8M used as system clock
1: HXTAL: HXTAL used as system clock
2: PLL: PLL used as system clock

SCSS

Bits 2-3: System clock switch status.

Allowed values:
0: IRC8M: IRC8M used as system clock
1: HXTAL: HXTAL used as system clock
2: PLL: PLL used as system clock

AHBPSC

Bits 4-7: AHB prescaler selection.

Allowed values:
0: Div1: CK_SYS
8: Div2: CK_SYS divided by 2
9: Div4: CK_SYS divided by 4
10: Div8: CK_SYS divided by 8
11: Div16: CK_SYS divided by 16
12: Div64: CK_SYS divided by 64
13: Div128: CK_SYS divided by 128
14: Div256: CK_SYS divided by 256
15: Div512: CK_SYS divided by 512

APB1PSC

Bits 8-10: APB1 prescaler selection.

Allowed values:
0: Div1: CK_AHB
4: Div2: CK_AHB divided by 2
5: Div4: CK_AHB divided by 4
6: Div8: CK_AHB divided by 8
7: Div16: CK_AHB divided by 16

APB2PSC

Bits 11-13: APB2 prescaler selection.

Allowed values:
0: Div1: CK_AHB
4: Div2: CK_AHB divided by 2
5: Div4: CK_AHB divided by 4
6: Div8: CK_AHB divided by 8
7: Div16: CK_AHB divided by 16

ADCPSC

Bits 14-15: ADC clock prescaler selection.

Allowed values:
0: Div2: CK_APB2 divided by 2
1: Div4: CK_APB2 divided by 4
2: Div6: CK_APB2 divided by 6
3: Div8: CK_APB2 divided by 8

PLLSEL

Bit 16: PLL Clock Source Selection.

Allowed values:
0: IRC8M_2: IRC8M / 2 selected as PLL source clock
1: HXTAL: HXTAL selected as PLL source clock

PLLPREDV

Bit 17: HXTAL divider for PLL source clock selection..

Allowed values:
0: Div1: HXTAL clock not divided
1: Div2: HXTAL clock divided by 2

PLLMF

Bits 18-21: PLL multiply factor.

Allowed values:
0: Mul2: PLL input clock x2
1: Mul3: PLL input clock x3
2: Mul4: PLL input clock x4
3: Mul5: PLL input clock x5
4: Mul6: PLL input clock x6
5: Mul7: PLL input clock x7
6: Mul8: PLL input clock x8
7: Mul9: PLL input clock x9
8: Mul10: PLL input clock x10
9: Mul11: PLL input clock x11
10: Mul12: PLL input clock x12
11: Mul13: PLL input clock x13
12: Mul14: PLL input clock x14
13: Mul15: PLL input clock x15
14: Mul16: PLL input clock x16
15: Mul16x: PLL input clock x16

CKOUTSEL

Bits 24-26: CK_OUT Clock Source Selection.

Allowed values:
0: None: No clock selected
1: IRC14M: Internal 14 MHz RC oscillator clock selected
2: LSI40K: Internal 40 kHz RC oscillator clock selected
3: LXTAL: External low speed oscillator clock selected
4: SYSCLK: System clock selected
5: IRC8M: Internal RC 8 MHz (HSI) oscillator clock selected
6: HXTAL: External 4-32 MHz (HSE) oscillator clock selected
7: PLL: PLL clock selected (divided by 1 or 2, depending on PLLDV)

PLLMF_MSB

Bit 27: Bit 4 of PLLMF register.

Allowed values:
0: None: Value of PLLMF is as set
1: Plus15: Add 15 to the value of PLLMF

CKOUTDIV

Bits 28-30: The CK_OUT divider which the CK_OUT frequency can be reduced.

Allowed values:
0: Div1: CK_OUT is divided by 1
1: Div2: CK_OUT is divided by 2
2: Div4: CK_OUT is divided by 4
3: Div8: CK_OUT is divided by 8
4: Div16: CK_OUT is divided by 16
5: Div32: CK_OUT is divided by 32
6: Div64: CK_OUT is divided by 64
7: Div128: CK_OUT is divided by 128

PLLDV

Bit 31: The CK_PLL divide by 1 or 2 for CK_OUT .

Allowed values:
0: Div2: PLL is divided by 2 for CK_OUT
1: Div1: PLL is not divided for CK_OUT

INT

Clock interrupt register (RCU_INT)

Offset: 0x8, reset: 0x00000000, access: Unspecified

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CKMIC
w 		IRC14MSTBIC
w 		PLLSTBIC
w 		HXTALSTBIC
w 		IRC8MSTBIC
w 		LXTALSTBIC
w 		IRC40KSTBIC
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IRC14MSTBIE
rw 		PLLSTBIE
rw 		HXTALSTBIE
rw 		IRC8MSTBIE
rw 		LXTALSTBIE
rw 		IRC40KSTBIE
rw 		CKMIF
r 		IRC14MSTBIF
r 		PLLSTBIF
r 		HXTALSTBIF
r 		IRC8MSTBIF
r 		LXTALSTBIF
r 		IRC40KSTBIF
r
Toggle Fields.

IRC40KSTBIF

Bit 0: IRC40K stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: IRC40K stabilisation interrupt generated

LXTALSTBIF

Bit 1: LXTAL stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: LXTAL stabilisation interrupt generated

IRC8MSTBIF

Bit 2: IRC8M stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: IRC8M stabilisation interrupt generated

HXTALSTBIF

Bit 3: HXTAL stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: HXTAL stabilisation interrupt generated

PLLSTBIF

Bit 4: PLL stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: PLL stabilisation interrupt generated

IRC14MSTBIF

Bit 5: IRC14M stabilization interrupt flag.

Allowed values:
0: NotInterrupted: No interrupt generated
1: Interrupted: IRC14M stabilisation interrupt generated

CKMIF

Bit 7: HXTAL Clock Stuck Interrupt Flag.

Allowed values:
0: NotInterrupted: Clock operating normally
1: Interrupted: HXTAL clock stuck

IRC40KSTBIE

Bit 8: IRC40K Stabilization interrupt enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

LXTALSTBIE

Bit 9: LXTAL Stabilization Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

IRC8MSTBIE

Bit 10: IRC8M Stabilization Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

HXTALSTBIE

Bit 11: HXTAL Stabilization Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

PLLSTBIE

Bit 12: PLL Stabilization Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

IRC14MSTBIE

Bit 13: IRC14M Stabilization Interrupt Enable.

Allowed values:
0: Disabled: Interrupt disabled
1: Enabled: Interrupt enabled

IRC40KSTBIC

Bit 16: IRC40K Stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear IRC40KSTBIF flag

LXTALSTBIC

Bit 17: LXTAL Stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear LXTALSTBIF flag

IRC8MSTBIC

Bit 18: IRC8M Stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear IRC8MSTBIF flag

HXTALSTBIC

Bit 19: HXTAL Stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear HXTALSTBIF flag

PLLSTBIC

Bit 20: PLL stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear PLLSTBIF flag

IRC14MSTBIC

Bit 21: IRC14M stabilization Interrupt Clear.

Allowed values:
1: Clear: Clear IRC14MSTBIF flag

CKMIC

Bit 23: HXTAL Clock Stuck Interrupt Clear.

Allowed values:
1: Clear: Clear CKMIF flag

APB2RST

APB2 reset register (RCU_APB2RST)

Offset: 0xC, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIMER16RST
rw 		TIMER15RST
rw 		TIMER14RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USART0RST
rw 		SPI0RST
rw 		TIMER0RST
rw 		ADCRST
rw 		CFGRST
rw
Toggle Fields.

CFGRST

Bit 0: System configuration reset.

Allowed values:
1: Reset: Reset the selected module

ADCRST

Bit 9: ADC reset.

Allowed values:
1: Reset: Reset the selected module

TIMER0RST

Bit 11: TIMER0 reset.

Allowed values:
1: Reset: Reset the selected module

SPI0RST

Bit 12: SPI0 Reset.

Allowed values:
1: Reset: Reset the selected module

USART0RST

Bit 14: USART0 Reset.

Allowed values:
1: Reset: Reset the selected module

TIMER14RST

Bit 16: TIMER14 reset.

Allowed values:
1: Reset: Reset the selected module

TIMER15RST

Bit 17: TIMER15 reset.

Allowed values:
1: Reset: Reset the selected module

TIMER16RST

Bit 18: TIMER16 reset.

Allowed values:
1: Reset: Reset the selected module

APB1RST

APB1 reset register (RCU_APB1RST)

Offset: 0x10, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OPAIVREFRST
rw 		CECRST
rw 		DACRST
rw 		PMURST
rw 		CAN1RST
rw 		CAN0RST
rw 		I2C1RST
rw 		I2C0RST
rw 		USART1RST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2RST
rw 		SPI1RST
rw 		WWDGTRST
rw 		SLCDRST
rw 		TIMER13RST
rw 		TIMER5RST
rw 		TIMER2RST
rw 		TIMER1RST
rw
Toggle Fields.

TIMER1RST

Bit 0: TIMER1 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIMER2RST

Bit 1: TIMER2 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIMER5RST

Bit 4: TIMER5 timer reset.

Allowed values:
1: Reset: Reset the selected module

TIMER13RST

Bit 8: TIMER13 timer reset.

Allowed values:
1: Reset: Reset the selected module

SLCDRST

Bit 9: SLCD reset.

Allowed values:
1: Reset: Reset the selected module

WWDGTRST

Bit 11: Window watchdog timer reset.

Allowed values:
1: Reset: Reset the selected module

SPI1RST

Bit 14: SPI1 reset.

Allowed values:
1: Reset: Reset the selected module

SPI2RST

Bit 15: SPI2 reset.

Allowed values:
1: Reset: Reset the selected module

USART1RST

Bit 17: USART1 reset.

Allowed values:
1: Reset: Reset the selected module

I2C0RST

Bit 21: I2C0 reset.

Allowed values:
1: Reset: Reset the selected module

I2C1RST

Bit 22: I2C1 reset.

Allowed values:
1: Reset: Reset the selected module

CAN0RST

Bit 25: CAN0 reset.

Allowed values:
1: Reset: Reset the selected module

CAN1RST

Bit 26: CAN1 reset.

Allowed values:
1: Reset: Reset the selected module

PMURST

Bit 28: Power control reset.

Allowed values:
1: Reset: Reset the selected module

DACRST

Bit 29: DAC reset.

Allowed values:
1: Reset: Reset the selected module

CECRST

Bit 30: HDMI CEC reset.

Allowed values:
1: Reset: Reset the selected module

OPAIVREFRST

Bit 31: OPA and IVREF reset.

Allowed values:
1: Reset: Reset the selected module

AHBEN

AHB enable register (RCU_AHBEN)

Offset: 0x14, reset: 0x00000014, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TSIEN
rw 		PFEN
rw 		PDEN
rw 		PCEN
rw 		PBEN
rw 		PAEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCEN
rw 		FMCEN
rw 		SRAMEN
rw 		DMAEN
rw
Toggle Fields.

DMAEN

Bit 0: DMA clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SRAMEN

Bit 2: SRAM interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

FMCEN

Bit 4: FMC clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CRCEN

Bit 6: CRC clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PAEN

Bit 17: GPIO port A clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PBEN

Bit 18: GPIO port B clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PCEN

Bit 19: GPIO port C clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PDEN

Bit 20: GPIO port D clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PFEN

Bit 22: GPIO port F clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TSIEN

Bit 24: TSI clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB2EN

APB2 enable register (RCU_APB2EN)

Offset: 0x18, reset: 0x00000000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TIMER16EN
rw 		TIMER15EN
rw 		TIMER14EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
USART0EN
rw 		SPI0EN
rw 		TIMER0EN
rw 		ADCEN
rw 		CFGCMPEN
rw
Toggle Fields.

CFGCMPEN

Bit 0: System configuration and comparator clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

ADCEN

Bit 9: ADC interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER0EN

Bit 11: TIMER0 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI0EN

Bit 12: SPI0 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART0EN

Bit 14: USART0 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER14EN

Bit 16: TIMER14 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER15EN

Bit 17: TIMER15 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER16EN

Bit 18: TIMER16 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

APB1EN

APB1 enable register (RCU_APB1EN)

Offset: 0x1C, reset: 0x00000000, access: read-write

17/17 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
OPAIVREFEN
rw 		CECEN
rw 		DACEN
rw 		PMUEN
rw 		CAN1EN
rw 		CAN0EN
rw 		I2C1EN
rw 		I2C0EN
rw 		USART1EN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SPI2EN
rw 		SPI1EN
rw 		WWDGTEN
rw 		SLCDEN
rw 		TIMER13EN
rw 		TIMER5EN
rw 		TIMER2EN
rw 		TIMER1EN
rw
Toggle Fields.

TIMER1EN

Bit 0: TIMER1 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER2EN

Bit 1: TIMER2 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER5EN

Bit 4: TIMER5 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

TIMER13EN

Bit 8: TIMER13 timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SLCDEN

Bit 9: SLCD clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

WWDGTEN

Bit 11: Window watchdog timer clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI1EN

Bit 14: SPI1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

SPI2EN

Bit 15: SPI2 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

USART1EN

Bit 17: USART1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C0EN

Bit 21: I2C0 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

I2C1EN

Bit 22: I2C1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CAN0EN

Bit 25: CAN0 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CAN1EN

Bit 26: CAN1 clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

PMUEN

Bit 28: Power interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

DACEN

Bit 29: DAC interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

CECEN

Bit 30: HDMI CEC interface clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

OPAIVREFEN

Bit 31: OPA and IVREF clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

BDCTL

Backup domain control register (RCU_BDCTL)

Offset: 0x20, reset: 0x00000018, access: Unspecified

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BKPRST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RTCEN
rw 		RTCSRC
rw 		LXTALDRI
rw 		LXTALBPS
rw 		LXTALSTB
r 		LXTALEN
rw
Toggle Fields.

LXTALEN

Bit 0: LXTAL enable.

Allowed values:
0: Off: LXTAL oscillator Off
1: On: LXTAL oscillator On

LXTALSTB

Bit 1: External low-speed oscillator stabilization.

Allowed values:
0: NotReady: LXTAL oscillator not ready
1: Ready: LXTAL oscillator ready

LXTALBPS

Bit 2: LXTAL bypass mode enable.

Allowed values:
0: NotBypassed: LXTAL crystal oscillator not bypassed
1: Bypassed: LXTAL crystal oscillator bypassed with external clock

LXTALDRI

Bits 3-4: LXTAL drive capability.

Allowed values:
0: Low: Low driving capability
1: MediumLow: Medium low driving capability
2: MediumHigh: Medium high driving capability
3: High: High driving capability (reset value)

RTCSRC

Bits 8-9: RTC clock entry selection.

Allowed values:
0: NoClock: No clock
1: LXTAL: LXTAL oscillator clock used as RTC clock
2: IRC40K: IRC40K oscillator clock used as RTC clock
3: HXTAL: HXTAL oscillator / 32 used as RTC clock

RTCEN

Bit 15: RTC clock enable.

Allowed values:
0: Disabled: RTC clock disabled
1: Enabled: RTC clock enabled

BKPRST

Bit 16: Backup domain reset.

Allowed values:
0: NoReset: Reset not activated
1: Reset: Reset the entire RTC domain

RSTSCK

Reset source /clock register (RCU_RSTSCK)

Offset: 0x24, reset: 0x0C000000, access: Unspecified

11/11 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
LPRSTF
rw 		WWDGTRSTF
rw 		FWDGTRSTF
rw 		SWRSTF
rw 		PORRSTF
rw 		EPRSTF
rw 		OBLRSTF
rw 		RSTFC
rw 		V12RSTF
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IRC40KSTB
r 		IRC40KEN
rw
Toggle Fields.

IRC40KEN

Bit 0: IRC40K enable.

Allowed values:
0: Off: IRC40K oscillator disabled
1: On: IRC40K oscillator enabled

IRC40KSTB

Bit 1: IRC40K stabilization.

Allowed values:
0: NotReady: IRC40K oscillator is not stable
1: Ready: IRC40K oscillator is stable

V12RSTF

Bit 23: V12 domain Power reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

RSTFC

Bit 24: Reset flag clear.

Allowed values:
1: Clear: Clears reset flags

OBLRSTF

Bit 25: Option byte loader reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

EPRSTF

Bit 26: External PIN reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

PORRSTF

Bit 27: Power reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

SWRSTF

Bit 28: Software reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

FWDGTRSTF

Bit 29: Free Watchdog timer reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

WWDGTRSTF

Bit 30: Window watchdog timer reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

LPRSTF

Bit 31: Low-power reset flag.

Allowed values:
0: NoReset: No reset has occured
1: Reset: A reset has occured

AHBRST

AHB reset register

Offset: 0x28, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
TSIRST
rw 		PFRST
rw 		PDRST
rw 		PCRST
rw 		PBRST
rw 		PARST
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
Toggle Fields.

PARST

Bit 17: GPIO port A reset.

Allowed values:
1: Reset: Reset the selected module

PBRST

Bit 18: GPIO port B reset.

Allowed values:
1: Reset: Reset the selected module

PCRST

Bit 19: GPIO port C reset.

Allowed values:
1: Reset: Reset the selected module

PDRST

Bit 20: GPIO port D reset.

Allowed values:
1: Reset: Reset the selected module

PFRST

Bit 22: GPIO port F reset.

Allowed values:
1: Reset: Reset the selected module

TSIRST

Bit 24: TSI unit reset.

Allowed values:
1: Reset: Reset the selected module

CFG1

Configuration register 1

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
HXTALPREDV
rw
Toggle Fields.

HXTALPREDV

Bits 0-3: CK_HXTAL divider previous PLL.

Allowed values:
0: Div1: HXTAL input to PLL not divided
1: Div2: HXTAL input to PLL divided by 2
2: Div3: HXTAL input to PLL divided by 3
3: Div4: HXTAL input to PLL divided by 4
4: Div5: HXTAL input to PLL divided by 5
5: Div6: HXTAL input to PLL divided by 6
6: Div7: HXTAL input to PLL divided by 7
7: Div8: HXTAL input to PLL divided by 8
8: Div9: HXTAL input to PLL divided by 9
9: Div10: HXTAL input to PLL divided by 10
10: Div11: HXTAL input to PLL divided by 11
11: Div12: HXTAL input to PLL divided by 12
12: Div13: HXTAL input to PLL divided by 13
13: Div14: HXTAL input to PLL divided by 14
14: Div15: HXTAL input to PLL divided by 15
15: Div16: HXTAL input to PLL divided by 16

CFG2

Configuration register 2

Offset: 0x30, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
IRC28MDIV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ADCSEL
rw 		CECSEL
rw 		USART0SEL
rw
Toggle Fields.

USART0SEL

Bits 0-1: CK_USART0 clock source selection.

Allowed values:
0: APB2: APB2 selected as USART0 clock source
1: SYS: SYS selected as USART0 clock source
2: LXTAL: LXTAL selected as USART0 clock source
3: IRC8M: IRC8M selected as USART0 clock source

CECSEL

Bit 6: CK_CEC clock source selection.

Allowed values:
0: IRC8M_Div244: IRC8M clock divided by 244 selected as CEC clock source
1: LXTAL: LXTAL clock selected as CEC clock source

ADCSEL

Bit 8: CK_ADC clock source selection.

Allowed values:
0: IRC28M: IRC28M selected as ADC clock source, possibly divided by 2
1: APB2: APB2 divided by prescaler selected as ADC clock source

IRC28MDIV

Bit 16: CK_IRC28M divider 2 or not.

Allowed values:
0: Div2: IRC28M is divided by 2 for ADC clock
1: Div1: IRC28M is not divided for ADC clock

CTL1

Control register 1

Offset: 0x34, reset: 0x00000080, access: Unspecified

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IRC14MCALIB
r 		IRC14MADJ
rw 		IRC14MSTB
r 		IRC14MEN
rw
Toggle Fields.

IRC14MEN

Bit 0: IRC14M Internal 14M RC oscillator Enable.

Allowed values:
0: Off: Clock Off
1: On: Clock On

IRC14MSTB

Bit 1: IRC14M Internal 14M RC Oscillator stabilization Flag.

Allowed values:
0: NotReady: IRC14M is not stable
1: Ready: IRC14M is stable

IRC14MADJ

Bits 3-7: Internal 14M RC Oscillator clock trim adjust value.

Allowed values: 0-31

IRC14MCALIB

Bits 8-15: Internal 14M RC Oscillator calibration value register.

Allowed values: 0-255

CFG3

Configuration register 4

Offset: 0x80, reset: 0x00000000, access: Unspecified

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKOUT1DIV
rw 		CKOUT1SEL
rw
Toggle Fields.

CKOUT1SEL

Bits 0-2: CKOUT1 Clock Source Selection.

Allowed values:
0: None: No clock selected
1: IRC28M: Internal 28 MHz RC oscillator clock selected
2: LSI40K: Internal 40 kHz RC oscillator clock selected
3: LXTAL: External low speed oscillator clock selected
4: SYSCLK: System clock selected
5: IRC8M: Internal RC 8 MHz (HSI) oscillator clock selected
6: HXTAL: External 4-32 MHz (HSE) oscillator clock selected
7: PLL: PLL clock selected (divided by 1 or 2, depending on PLLDV)

CKOUT1DIV

Bits 8-13: The CK_OUT1 divider which the CK_OUT1 frequency can be reduced see bits 2:0 of RCU_CFG3 for CK_OUT1.

Allowed values: 0-62

ADDEN

Additional enable register

Offset: 0xF8, reset: 0x00000000, access: Unspecified

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2C2EN
rw
Toggle Fields.

I2C2EN

Bit 0: I2C2 unit clock enable.

Allowed values:
0: Disabled: The selected clock is disabled
1: Enabled: The selected clock is enabled

ADDRST

Additional reset register

Offset: 0xFC, reset: 0x00000000, access: Unspecified

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2C2RST
rw
Toggle Fields.

I2C2RST

Bit 0: I2C2 unit reset.

Allowed values:
1: Reset: Reset the selected module

VKEY

Voltage key register

Offset: 0x100, reset: 0x00000000, access: Unspecified

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
KEY
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
KEY
rw
Toggle Fields.

KEY

Bits 0-31: The key of RCU_PDVSEL and RCU_DSV register.

Allowed values:
439041101: Enable: Allow PDVSEL and DSV to be written

DSV

Deep-sleep mode voltage register

Offset: 0x134, reset: 0x00000000, access: Unspecified

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DSLPVS
rw
Toggle Fields.

DSLPVS

Bits 0-2: Deep-sleep mode voltage select.

Allowed values:
0: V1_8: The core voltage is 1.8 V in deep-sleep mode
1: V1_6: The core voltage is 1.6 V in deep-sleep mode
2: V1_4: The core voltage is 1.4 V in deep-sleep mode
3: V1_2: The core voltage is 1.2 V in deep-sleep mode

RTC

0x40002800: Real-time clock

18/101 fields covered. Toggle Registers.

TIME

Time of day register

Offset: 0x0, reset: 0x00000000, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
rw 		HRT
rw 		HRU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
rw 		MNU
rw 		SCT
rw 		SCU
rw
Toggle Fields.

SCU

Bits 0-3: Second units in BCD format.

SCT

Bits 4-6: Second tens in BCD format.

MNU

Bits 8-11: Minute units in BCD format.

MNT

Bits 12-14: Minute tens in BCD format.

HRU

Bits 16-19: Hour units in BCD format.

HRT

Bits 20-21: Hour tens in BCD format.

PM

Bit 22: AM/PM mark.

DATE

date register

Offset: 0x4, reset: 0x00002101, access: read-write

0/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
YRT
rw 		YRU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOW
rw 		MONT
rw 		MONU
rw 		DAYT
rw 		DAYU
rw
Toggle Fields.

DAYU

Bits 0-3: Date units in BCD format.

DAYT

Bits 4-5: Date tens in BCD format.

MONU

Bits 8-11: Month units in BCD format.

MONT

Bit 12: Month tens in BCD format.

DOW

Bits 13-15: Week day units.

YRU

Bits 16-19: Year units in BCD format.

YRT

Bits 20-23: Year tens in BCD format.

CTL

control register

Offset: 0x8, reset: 0x00000000, access: Unspecified

0/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
COEN
rw 		OS
rw 		OPOL
rw 		COS
rw 		DSM
rw 		S1H
w 		A1H
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TSIE
rw 		ALRM0IE
rw 		TSEN
rw 		ALRM0EN
rw 		CS
rw 		BPSHAD
rw 		REFEN
rw 		TSEG
rw
Toggle Fields.

TSEG

Bit 3: Valid event edge of time-stamp.

REFEN

Bit 4: Reference clock detection function enable.

BPSHAD

Bit 5: Shadow registers bypass control.

CS

Bit 6: Clock System.

ALRM0EN

Bit 8: Alarm-0 function enable.

TSEN

Bit 11: time-stamp function enable.

ALRM0IE

Bit 12: RTC alarm-0 interrupt enable.

TSIE

Bit 15: Time-stamp interrupt enable.

A1H

Bit 16: Add 1 hour(summer time change.

S1H

Bit 17: Subtract 1 hour(winter time change).

DSM

Bit 18: Daylight saving mark.

COS

Bit 19: Calibration output selection.

OPOL

Bit 20: Output polarity.

OS

Bits 21-22: Output selection.

COEN

Bit 23: Calibration output enable.

STAT

Status register

Offset: 0xC, reset: 0x00000007, access: Unspecified

4/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SCPF
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TP1F
rw 		TP0F
rw 		TSOVRF
rw 		TSF
rw 		ALRM0F
rw 		INITM
rw 		INITF
r 		RSYNF
rw 		YCM
r 		SOPF
rw 		ALRM0WF
r
Toggle Fields.

ALRM0WF

Bit 0: Alarm 0 configuration can be write flag.

SOPF

Bit 3: Shift function operation pending flag.

YCM

Bit 4: Year configuration mark.

RSYNF

Bit 5: Register synchronization flag.

INITF

Bit 6: Initialization state flag.

INITM

Bit 7: enter initialization mode.

ALRM0F

Bit 8: Alarm-0 occurs flag.

TSF

Bit 11: Time-stamp flag.

TSOVRF

Bit 12: Time-stamp overflow flag.

TP0F

Bit 13: RTC_TAMP0 detected flag.

TP1F

Bit 14: RTC_TAMP1 detected flag.

SCPF

Bit 16: Smooth calibration pending flag.

PSC

Time prescaler register

Offset: 0x10, reset: 0x007F00FF, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
FACTOR_A
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FACTOR_S
rw
Toggle Fields.

FACTOR_S

Bits 0-14: Synchronous prescaler factor.

FACTOR_A

Bits 16-22: Asynchronous prescaler factor.

ALRM0TD

Alarm 0 Time and date register

Offset: 0x1C, reset: 0x00000000, access: read-write

0/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSKD
rw 		DOWS
rw 		DAYT
rw 		DAYU
rw 		MSKH
rw 		PM
rw 		HRT
rw 		HRU
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSKM
rw 		MNT
rw 		MNU
rw 		MSKS
rw 		SCT
rw 		SCU
rw
Toggle Fields.

SCU

Bits 0-3: Second units in BCD code.

SCT

Bits 4-6: Second tens in BCD code.

MSKS

Bit 7: Alarm second mask bit.

MNU

Bits 8-11: Minutes units in BCD code.

MNT

Bits 12-14: Minutes tens in BCD code.

MSKM

Bit 15: Alarm minutes mask bit.

HRU

Bits 16-19: Hour units in BCD code.

HRT

Bits 20-21: Hour tens in BCD code.

PM

Bit 22: AM/PM flag.

MSKH

Bit 23: Alarm hour mask bit.

DAYU

Bits 24-27: Date units or week day in BCD code.

DAYT

Bits 28-29: Date tens in BCD code.

DOWS

Bit 30: Day of the week selected.

MSKD

Bit 31: Alarm date mask bit.

WPK

Write protection key register

Offset: 0x24, reset: 0x00000000, access: write-only

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WPK
w
Toggle Fields.

WPK

Bits 0-7: Write protection key.

SS

sub second register

Offset: 0x28, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SSC
r
Toggle Fields.

SSC

Bits 0-15: Sub second value.

SHIFTCTL

Shift function control register

Offset: 0x2C, reset: 0x00000000, access: write-only

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
A1S
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SFS
w
Toggle Fields.

SFS

Bits 0-14: Subtract a fraction of a second.

A1S

Bit 31: One second add.

TTS

Time of time stamp register

Offset: 0x30, reset: 0x00000000, access: read-only

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PM
r 		HRT
r 		HRU
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNT
r 		MNU
r 		SCT
r 		SCU
r
Toggle Fields.

SCU

Bits 0-3: Second units in BCD code.

SCT

Bits 4-6: Second tens in BCD code.

MNU

Bits 8-11: Minute units in BCD code.

MNT

Bits 12-14: Minute tens in BCD code.

HRU

Bits 16-19: Hour units in BCD code.

HRT

Bits 20-21: Hour tens in BCD code.

PM

Bit 22: AM/PM mark.

DTS

Date of time stamp register

Offset: 0x34, reset: 0x00000000, access: read-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DOW
r 		MONT
r 		MONU
r 		DAYT
r 		DAYU
r
Toggle Fields.

DAYU

Bits 0-3: Date units in BCD code.

DAYT

Bits 4-5: Date tens in BCD code.

MONU

Bits 8-11: Month units in BCD code.

MONT

Bit 12: Month tens in BCD code.

DOW

Bits 13-15: Week day units.

SSTS

Sub second of time stamp register

Offset: 0x38, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SSC
r
Toggle Fields.

SSC

Bits 0-15: Sub second value.

HRFC

High resolution frequency compensation register

Offset: 0x3C, reset: 0x00000000, access: read-write

0/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
FREQI
rw 		CWND8
rw 		CWND16
rw 		CMSK
rw
Toggle Fields.

CMSK

Bits 0-8: Calibration mask number.

CWND16

Bit 13: Frequency compensation window 16 second selected.

CWND8

Bit 14: Frequency compensation window 8 second selected.

FREQI

Bit 15: Increase RTC frequency by 488.5ppm.

TAMP

Tamper register

Offset: 0x40, reset: 0x00000000, access: read-write

0/16 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PC15MDE
rw 		PC15VAL
rw 		PC14MDE
rw 		PC14VAL
rw 		PC13MDE
rw 		PC13VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DISPU
rw 		PRCH
rw 		FLT
rw 		FREQ
rw 		TPTS
rw 		TP1EG
rw 		TP1EN
rw 		TPIE
rw 		TP0EG
rw 		TP0EN
rw
Toggle Fields.

TP0EN

Bit 0: RTC_TAMP1 input detection enable.

TP0EG

Bit 1: Tamper 0 event trigger edge for RTC_TAMP0 input.

TPIE

Bit 2: Tamper detection interrupt enable.

TP1EN

Bit 3: Tamper 1 detection enable.

TP1EG

Bit 4: Tamper 1 event trigger edge for RTC_TAMP1 input.

TPTS

Bit 7: Make tamper function used for timestamp function.

FREQ

Bits 8-10: Sample frequency of tamper event detection.

FLT

Bits 11-12: RTC_TAMPx filter count setting.

PRCH

Bits 13-14: Precharge duration time of RTC_TAMPx.

DISPU

Bit 15: RTC_TAMPx pull up disable bit.

PC13VAL

Bit 18: Alarm output type control/PC13 output value.

PC13MDE

Bit 19: PC13 mode.

PC14VAL

Bit 20: PC14 value.

PC14MDE

Bit 21: PC14 mode.

PC15VAL

Bit 22: PC15 value.

PC15MDE

Bit 23: PC15 mode.

ALRM0SS

Alarm 0 sub second register

Offset: 0x44, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
MSKSSC
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SSC
rw
Toggle Fields.

SSC

Bits 0-14: Alarm sub second value.

MSKSSC

Bits 24-27: Mask control bit of SSC.

BKP0

backup register

Offset: 0x50, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: Backup domain registers.

BKP1

backup register

Offset: 0x54, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: Backup domain registers.

BKP2

backup register

Offset: 0x58, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: Backup domain registers.

BKP3

backup register

Offset: 0x5C, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: Backup domain registers.

BKP4

backup register

Offset: 0x60, reset: 0x00000000, access: read-write

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
DATA
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-31: Backup domain registers.

SLCD

0x40002400: Segment LCD controller

5/31 fields covered. Toggle Registers.

CTL

Control register

Offset: 0x0, reset: 0x00000000, access: Unspecified

0/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
COMS
rw 		BIAS
rw 		DUTY
rw 		VSRC
rw 		SLCDON
rw
Toggle Fields.

SLCDON

Bit 0: SLCD controller start.

VSRC

Bit 1: SLCD voltage source.

DUTY

Bits 2-4: Duty select.

BIAS

Bits 5-6: Bias select.

COMS

Bit 7: Common/segment padselect.

CFG

SLCD configuration register

Offset: 0x4, reset: 0x00000000, access: Unspecified

0/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PSC
rw 		DIV
rw 		BLKMOD
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BLKDIV
rw 		CONR
rw 		DTD
rw 		PULSE
rw 		UPDIE
rw 		SOFIE
rw 		HDEN
rw
Toggle Fields.

HDEN

Bit 0: High drive enable.

SOFIE

Bit 1: Start of frame interrupt enable.

UPDIE

Bit 3: SLCD update done interrupt enable.

PULSE

Bits 4-6: Pulse on duration.

DTD

Bits 7-9: Dead time duration.

CONR

Bits 10-12: Contrast ratio.

BLKDIV

Bits 13-15: Blink frequency divider.

BLKMOD

Bits 16-17: Blink mode.

DIV

Bits 18-21: SLCD clock divider.

PSC

Bits 22-25: SLCD clock prescaler.

STAT

SLCD status flag register

Offset: 0x8, reset: 0x00000020, access: Unspecified

5/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SYNF
r 		VRDYF
r 		UPDF
r 		UPRF
rw 		SOF
r 		ONF
r
Toggle Fields.

ONF

Bit 0: SLCD controller on flag.

SOF

Bit 1: Start of frame flag.

UPRF

Bit 2: Update SLCD data request flag.

UPDF

Bit 3: Update SLCD data done flag.

VRDYF

Bit 4: SLCD voltage ready flag.

SYNF

Bit 5: SLCD_CFG register synchronization flag.

STATC

SLCD status flag clear register

Offset: 0xC, reset: 0x00000000, access: Unspecified

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UPDC
rw 		SOFC
rw
Toggle Fields.

SOFC

Bit 1: Start of frame flag clear.

UPDC

Bit 3: SLCD data update done clear bit.

DATA0

SLCD display data register

Offset: 0x14, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA0
rw
Toggle Fields.

SEG_DATA0

Bits 0-31: Each bit corresponds to one segment to display.

DATA1

SLCD display data register

Offset: 0x1C, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA1
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA1
rw
Toggle Fields.

SEG_DATA1

Bits 0-31: Each bit corresponds to one segment to display.

DATA2

SLCD display data register

Offset: 0x24, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA2
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA2
rw
Toggle Fields.

SEG_DATA2

Bits 0-31: Each bit corresponds to one segment to display.

DATA3

SLCD display data register

Offset: 0x2C, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA3
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA3
rw
Toggle Fields.

SEG_DATA3

Bits 0-31: Each bit corresponds to one segment to display.

DATA4

SLCD display data register

Offset: 0x34, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA4
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA4
rw
Toggle Fields.

SEG_DATA4

Bits 0-31: Each bit corresponds to one segment to display.

DATA5

SLCD display data register

Offset: 0x3C, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA5
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA5
rw
Toggle Fields.

SEG_DATA5

Bits 0-31: Each bit corresponds to one segment to display.

DATA6

SLCD display data register

Offset: 0x44, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA6
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA6
rw
Toggle Fields.

SEG_DATA6

Bits 0-31: Each bit corresponds to one segment to display.

DATA7

SLCD display data register

Offset: 0x4C, reset: 0x00000000, access: Unspecified

0/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
SEG_DATA7
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SEG_DATA7
rw
Toggle Fields.

SEG_DATA7

Bits 0-31: Each bit corresponds to one segment to display.

SPI0

0x40013000: Serial peripheral interface

46/46 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BDEN
rw 		BDOEN
rw 		CRCEN
rw 		CRCNT
rw 		FF16
rw 		RO
rw 		SWNSSEN
rw 		SWNSS
rw 		LF
rw 		SPIEN
rw 		PSC
rw 		MSTMOD
rw 		CKPL
rw 		CKPH
rw
Toggle Fields.

CKPH

Bit 0: Clock Phase Selection.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CKPL

Bit 1: Clock Polarity Selection.

Allowed values:
0: IdleLow: CLK pulled low when idle
1: IdleHigh: CLK pulled high when idle

MSTMOD

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

PSC

Bits 3-5: Master Clock Prescaler Selection.

Allowed values:
0: Div2: PCLK / 2
1: Div4: PCLK / 4
2: Div8: PCLK / 8
3: Div16: PCLK / 16
4: Div32: PCLK / 32
5: Div64: PCLK / 64
6: Div128: PCLK / 128
7: Div256: PCLK / 256

SPIEN

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LF

Bit 7: LSB First Mode.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SWNSS

Bit 8: NSS Pin Selection In NSS Software Mode.

Allowed values:
0: SlaveSelected: NSS is pulled low
1: SlaveNotSelected: NSS is pulled high

SWNSSEN

Bit 9: NSS Software Mode Selection.

Allowed values:
0: Hardware: Software slave management disabled
1: Software: Software slave management enabled

RO

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: ReceiveOnly: Output disabled (Receive-only mode)

FF16

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNT

Bit 12: CRC transfer next.

Allowed values:
0: Data: Next transmit value is data from Tx buffer
1: CRC: Next transmit value is CRC value from TCRC

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BDOEN

Bit 14: Bidirectional Transmit output enable .

Allowed values:
0: ReceiveOnly: Receive-only mode
1: TransmitOnly: Transmit-only mode

BDEN

Bit 15: Bidirectional enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TBEIE
rw 		RBNEIE
rw 		ERRIE
rw 		NSSDRV
rw 		DMATEN
rw 		DMAREN
rw
Toggle Fields.

DMAREN

Bit 0: Receive Buffer DMA Enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

DMATEN

Bit 1: Transmit Buffer DMA Enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

NSSDRV

Bit 2: Drive NSS Output.

Allowed values:
0: Disabled: NSS output is disabled in master mode
1: Enabled: NSS output is enabled in master mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

RBNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Disabled: RBNE interrupt disabled
1: Enabled: RBNE interrupt enabled

TBEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Disabled: TBE interrupt disabled
1: Enabled: TBE interrupt enabled

STAT

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRANS
r 		RXORERR
r 		CONFERR
r 		CRCERR
rw 		TXURERR
r 		I2SCH
r 		TBE
r 		RBNE
r
Toggle Fields.

RBNE

Bit 0: Receive Buffer Not Empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TBE

Bit 1: Transmit Buffer Empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

I2SCH

Bit 2: I2S channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

TXURERR

Bit 3: Transmission underrun error bit.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: SPI CRC Error Bit.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

CONFERR

Bit 5: SPI Configuration error.

Allowed values:
0: NoFault: No configuration fault occurred
1: Fault: Configuration fault occurred

RXORERR

Bit 6: Reception Overrun Error Bit.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

TRANS

Bit 7: Transmitting On-going Bit.

Allowed values:
0: Idle: SPI or I2S is idle
1: Busy: SPI or I2S is currently transmitting or receiving

DATA

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPOLY

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RCRC

Receive CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RCRC
r
Toggle Fields.

RCRC

Bits 0-15: CRC value of the received bytes.

Allowed values: 0-65535

TCRC

Transmit CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TCRC
r
Toggle Fields.

TCRC

Bits 0-15: CRC value of the transmitted bytes.

Allowed values: 0-65535

I2SCTL

I2S control register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SSEL
rw 		I2SEN
rw 		I2SOPMOD
rw 		PCMSMOD
rw 		I2SSTD
rw 		CKPL
rw 		DTLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length.

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DTLEN

Bits 1-2: Data length .

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPL

Bit 3: Idle state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSMOD

Bit 7: PCM frame synchronization mode.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SOPMOD

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SEN

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SSEL

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPSC

I2S prescaler register

Offset: 0x20, reset: 0002, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOEN
rw 		OF
rw 		DIV
rw
Toggle Fields.

DIV

Bits 0-7: Dividing factor for the prescaler.

Allowed values: 1-255

OF

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is DIV * 2
1: Odd: Real divider value is (DIV * 2) + 1

MCKOEN

Bit 9: I2S_MCK output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

QCTL

Quad wire control register

Offset: 0x80, reset: 0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IO23_DRV
rw 		QRD
rw 		QMOD
rw
Toggle Fields.

QMOD

Bit 0: Quad wire mode enable.

Allowed values:
0: Single: Single wire mode
1: Quad: Quad-SPI mode

QRD

Bit 1: Quad wire read select.

Allowed values:
0: Write: Quad wire write mode
1: Read: Quad wire read mode

IO23_DRV

Bit 2: Drive IO2 and IO3 enable.

Allowed values:
0: Disabled: IO2 and IO3 are not driven in single wire mode
1: High: IO2 and IO3 are driven high in single wire mode

SPI1

0x40003800: Serial peripheral interface

46/46 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BDEN
rw 		BDOEN
rw 		CRCEN
rw 		CRCNT
rw 		FF16
rw 		RO
rw 		SWNSSEN
rw 		SWNSS
rw 		LF
rw 		SPIEN
rw 		PSC
rw 		MSTMOD
rw 		CKPL
rw 		CKPH
rw
Toggle Fields.

CKPH

Bit 0: Clock Phase Selection.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CKPL

Bit 1: Clock Polarity Selection.

Allowed values:
0: IdleLow: CLK pulled low when idle
1: IdleHigh: CLK pulled high when idle

MSTMOD

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

PSC

Bits 3-5: Master Clock Prescaler Selection.

Allowed values:
0: Div2: PCLK / 2
1: Div4: PCLK / 4
2: Div8: PCLK / 8
3: Div16: PCLK / 16
4: Div32: PCLK / 32
5: Div64: PCLK / 64
6: Div128: PCLK / 128
7: Div256: PCLK / 256

SPIEN

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LF

Bit 7: LSB First Mode.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SWNSS

Bit 8: NSS Pin Selection In NSS Software Mode.

Allowed values:
0: SlaveSelected: NSS is pulled low
1: SlaveNotSelected: NSS is pulled high

SWNSSEN

Bit 9: NSS Software Mode Selection.

Allowed values:
0: Hardware: Software slave management disabled
1: Software: Software slave management enabled

RO

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: ReceiveOnly: Output disabled (Receive-only mode)

FF16

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNT

Bit 12: CRC transfer next.

Allowed values:
0: Data: Next transmit value is data from Tx buffer
1: CRC: Next transmit value is CRC value from TCRC

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BDOEN

Bit 14: Bidirectional Transmit output enable .

Allowed values:
0: ReceiveOnly: Receive-only mode
1: TransmitOnly: Transmit-only mode

BDEN

Bit 15: Bidirectional enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TBEIE
rw 		RBNEIE
rw 		ERRIE
rw 		NSSDRV
rw 		DMATEN
rw 		DMAREN
rw
Toggle Fields.

DMAREN

Bit 0: Receive Buffer DMA Enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

DMATEN

Bit 1: Transmit Buffer DMA Enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

NSSDRV

Bit 2: Drive NSS Output.

Allowed values:
0: Disabled: NSS output is disabled in master mode
1: Enabled: NSS output is enabled in master mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

RBNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Disabled: RBNE interrupt disabled
1: Enabled: RBNE interrupt enabled

TBEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Disabled: TBE interrupt disabled
1: Enabled: TBE interrupt enabled

STAT

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRANS
r 		RXORERR
r 		CONFERR
r 		CRCERR
rw 		TXURERR
r 		I2SCH
r 		TBE
r 		RBNE
r
Toggle Fields.

RBNE

Bit 0: Receive Buffer Not Empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TBE

Bit 1: Transmit Buffer Empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

I2SCH

Bit 2: I2S channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

TXURERR

Bit 3: Transmission underrun error bit.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: SPI CRC Error Bit.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

CONFERR

Bit 5: SPI Configuration error.

Allowed values:
0: NoFault: No configuration fault occurred
1: Fault: Configuration fault occurred

RXORERR

Bit 6: Reception Overrun Error Bit.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

TRANS

Bit 7: Transmitting On-going Bit.

Allowed values:
0: Idle: SPI or I2S is idle
1: Busy: SPI or I2S is currently transmitting or receiving

DATA

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPOLY

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RCRC

Receive CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RCRC
r
Toggle Fields.

RCRC

Bits 0-15: CRC value of the received bytes.

Allowed values: 0-65535

TCRC

Transmit CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TCRC
r
Toggle Fields.

TCRC

Bits 0-15: CRC value of the transmitted bytes.

Allowed values: 0-65535

I2SCTL

I2S control register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SSEL
rw 		I2SEN
rw 		I2SOPMOD
rw 		PCMSMOD
rw 		I2SSTD
rw 		CKPL
rw 		DTLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length.

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DTLEN

Bits 1-2: Data length .

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPL

Bit 3: Idle state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSMOD

Bit 7: PCM frame synchronization mode.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SOPMOD

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SEN

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SSEL

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPSC

I2S prescaler register

Offset: 0x20, reset: 0002, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOEN
rw 		OF
rw 		DIV
rw
Toggle Fields.

DIV

Bits 0-7: Dividing factor for the prescaler.

Allowed values: 1-255

OF

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is DIV * 2
1: Odd: Real divider value is (DIV * 2) + 1

MCKOEN

Bit 9: I2S_MCK output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

QCTL

Quad wire control register

Offset: 0x80, reset: 0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IO23_DRV
rw 		QRD
rw 		QMOD
rw
Toggle Fields.

QMOD

Bit 0: Quad wire mode enable.

Allowed values:
0: Single: Single wire mode
1: Quad: Quad-SPI mode

QRD

Bit 1: Quad wire read select.

Allowed values:
0: Write: Quad wire write mode
1: Read: Quad wire read mode

IO23_DRV

Bit 2: Drive IO2 and IO3 enable.

Allowed values:
0: Disabled: IO2 and IO3 are not driven in single wire mode
1: High: IO2 and IO3 are driven high in single wire mode

SPI2

0x40003C00: Serial peripheral interface

46/46 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BDEN
rw 		BDOEN
rw 		CRCEN
rw 		CRCNT
rw 		FF16
rw 		RO
rw 		SWNSSEN
rw 		SWNSS
rw 		LF
rw 		SPIEN
rw 		PSC
rw 		MSTMOD
rw 		CKPL
rw 		CKPH
rw
Toggle Fields.

CKPH

Bit 0: Clock Phase Selection.

Allowed values:
0: FirstEdge: The first clock transition is the first data capture edge
1: SecondEdge: The second clock transition is the first data capture edge

CKPL

Bit 1: Clock Polarity Selection.

Allowed values:
0: IdleLow: CLK pulled low when idle
1: IdleHigh: CLK pulled high when idle

MSTMOD

Bit 2: Master selection.

Allowed values:
0: Slave: Slave configuration
1: Master: Master configuration

PSC

Bits 3-5: Master Clock Prescaler Selection.

Allowed values:
0: Div2: PCLK / 2
1: Div4: PCLK / 4
2: Div8: PCLK / 8
3: Div16: PCLK / 16
4: Div32: PCLK / 32
5: Div64: PCLK / 64
6: Div128: PCLK / 128
7: Div256: PCLK / 256

SPIEN

Bit 6: SPI enable.

Allowed values:
0: Disabled: Peripheral disabled
1: Enabled: Peripheral enabled

LF

Bit 7: LSB First Mode.

Allowed values:
0: MSBFirst: Data is transmitted/received with the MSB first
1: LSBFirst: Data is transmitted/received with the LSB first

SWNSS

Bit 8: NSS Pin Selection In NSS Software Mode.

Allowed values:
0: SlaveSelected: NSS is pulled low
1: SlaveNotSelected: NSS is pulled high

SWNSSEN

Bit 9: NSS Software Mode Selection.

Allowed values:
0: Hardware: Software slave management disabled
1: Software: Software slave management enabled

RO

Bit 10: Receive only.

Allowed values:
0: FullDuplex: Full duplex (Transmit and receive)
1: ReceiveOnly: Output disabled (Receive-only mode)

FF16

Bit 11: Data frame format.

Allowed values:
0: EightBit: 8-bit data frame format is selected for transmission/reception
1: SixteenBit: 16-bit data frame format is selected for transmission/reception

CRCNT

Bit 12: CRC transfer next.

Allowed values:
0: Data: Next transmit value is data from Tx buffer
1: CRC: Next transmit value is CRC value from TCRC

CRCEN

Bit 13: Hardware CRC calculation enable.

Allowed values:
0: Disabled: CRC calculation disabled
1: Enabled: CRC calculation enabled

BDOEN

Bit 14: Bidirectional Transmit output enable .

Allowed values:
0: ReceiveOnly: Receive-only mode
1: TransmitOnly: Transmit-only mode

BDEN

Bit 15: Bidirectional enable.

Allowed values:
0: Unidirectional: 2-line unidirectional data mode selected
1: Bidirectional: 1-line bidirectional data mode selected

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TBEIE
rw 		RBNEIE
rw 		ERRIE
rw 		NSSDRV
rw 		DMATEN
rw 		DMAREN
rw
Toggle Fields.

DMAREN

Bit 0: Receive Buffer DMA Enable.

Allowed values:
0: Disabled: Rx buffer DMA disabled
1: Enabled: Rx buffer DMA enabled

DMATEN

Bit 1: Transmit Buffer DMA Enable.

Allowed values:
0: Disabled: Tx buffer DMA disabled
1: Enabled: Tx buffer DMA enabled

NSSDRV

Bit 2: Drive NSS Output.

Allowed values:
0: Disabled: NSS output is disabled in master mode
1: Enabled: NSS output is enabled in master mode

ERRIE

Bit 5: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt disabled
1: Enabled: Error interrupt enabled

RBNEIE

Bit 6: RX buffer not empty interrupt enable.

Allowed values:
0: Disabled: RBNE interrupt disabled
1: Enabled: RBNE interrupt enabled

TBEIE

Bit 7: Tx buffer empty interrupt enable.

Allowed values:
0: Disabled: TBE interrupt disabled
1: Enabled: TBE interrupt enabled

STAT

status register

Offset: 0x8, reset: 0x0002, access: Unspecified

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRANS
r 		RXORERR
r 		CONFERR
r 		CRCERR
rw 		TXURERR
r 		I2SCH
r 		TBE
r 		RBNE
r
Toggle Fields.

RBNE

Bit 0: Receive Buffer Not Empty.

Allowed values:
0: Empty: Rx buffer empty
1: NotEmpty: Rx buffer not empty

TBE

Bit 1: Transmit Buffer Empty.

Allowed values:
0: NotEmpty: Tx buffer not empty
1: Empty: Tx buffer empty

I2SCH

Bit 2: I2S channel side.

Allowed values:
0: Left: Channel left has to be transmitted or has been received
1: Right: Channel right has to be transmitted or has been received

TXURERR

Bit 3: Transmission underrun error bit.

Allowed values:
0: NoUnderrun: No underrun occurred
1: Underrun: Underrun occurred

CRCERR

Bit 4: SPI CRC Error Bit.

Allowed values:
0: Match: CRC value received matches the SPIx_RXCRCR value
1: NoMatch: CRC value received does not match the SPIx_RXCRCR value

CONFERR

Bit 5: SPI Configuration error.

Allowed values:
0: NoFault: No configuration fault occurred
1: Fault: Configuration fault occurred

RXORERR

Bit 6: Reception Overrun Error Bit.

Allowed values:
0: NoOverrun: No overrun occurred
1: Overrun: Overrun occurred

TRANS

Bit 7: Transmitting On-going Bit.

Allowed values:
0: Idle: SPI or I2S is idle
1: Busy: SPI or I2S is currently transmitting or receiving

DATA

data register

Offset: 0xC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DATA
rw
Toggle Fields.

DATA

Bits 0-15: Data register.

Allowed values: 0-65535

CRCPOLY

CRC polynomial register

Offset: 0x10, reset: 0x0007, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CRCPOLY
rw
Toggle Fields.

CRCPOLY

Bits 0-15: CRC polynomial register.

Allowed values: 0-65535

RCRC

Receive CRC register

Offset: 0x14, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RCRC
r
Toggle Fields.

RCRC

Bits 0-15: CRC value of the received bytes.

Allowed values: 0-65535

TCRC

Transmit CRC register

Offset: 0x18, reset: 0x0000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TCRC
r
Toggle Fields.

TCRC

Bits 0-15: CRC value of the transmitted bytes.

Allowed values: 0-65535

I2SCTL

I2S control register

Offset: 0x1C, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
I2SSEL
rw 		I2SEN
rw 		I2SOPMOD
rw 		PCMSMOD
rw 		I2SSTD
rw 		CKPL
rw 		DTLEN
rw 		CHLEN
rw
Toggle Fields.

CHLEN

Bit 0: Channel length.

Allowed values:
0: SixteenBit: 16-bit wide
1: ThirtyTwoBit: 32-bit wide

DTLEN

Bits 1-2: Data length .

Allowed values:
0: SixteenBit: 16-bit data length
1: TwentyFourBit: 24-bit data length
2: ThirtyTwoBit: 32-bit data length

CKPL

Bit 3: Idle state clock polarity.

Allowed values:
0: IdleLow: I2S clock inactive state is low level
1: IdleHigh: I2S clock inactive state is high level

I2SSTD

Bits 4-5: I2S standard selection.

Allowed values:
0: Philips: I2S Philips standard
1: MSB: MSB justified standard
2: LSB: LSB justified standard
3: PCM: PCM standard

PCMSMOD

Bit 7: PCM frame synchronization mode.

Allowed values:
0: Short: Short frame synchronisation
1: Long: Long frame synchronisation

I2SOPMOD

Bits 8-9: I2S configuration mode.

Allowed values:
0: SlaveTx: Slave - transmit
1: SlaveRx: Slave - receive
2: MasterTx: Master - transmit
3: MasterRx: Master - receive

I2SEN

Bit 10: I2S Enable.

Allowed values:
0: Disabled: I2S peripheral is disabled
1: Enabled: I2S peripheral is enabled

I2SSEL

Bit 11: I2S mode selection.

Allowed values:
0: SPIMode: SPI mode is selected
1: I2SMode: I2S mode is selected

I2SPSC

I2S prescaler register

Offset: 0x20, reset: 0002, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MCKOEN
rw 		OF
rw 		DIV
rw
Toggle Fields.

DIV

Bits 0-7: Dividing factor for the prescaler.

Allowed values: 1-255

OF

Bit 8: Odd factor for the prescaler.

Allowed values:
0: Even: Real divider value is DIV * 2
1: Odd: Real divider value is (DIV * 2) + 1

MCKOEN

Bit 9: I2S_MCK output enable.

Allowed values:
0: Disabled: Master clock output is disabled
1: Enabled: Master clock output is enabled

QCTL

Quad wire control register

Offset: 0x80, reset: 0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
IO23_DRV
rw 		QRD
rw 		QMOD
rw
Toggle Fields.

QMOD

Bit 0: Quad wire mode enable.

Allowed values:
0: Single: Single wire mode
1: Quad: Quad-SPI mode

QRD

Bit 1: Quad wire read select.

Allowed values:
0: Write: Quad wire write mode
1: Read: Quad wire read mode

IO23_DRV

Bit 2: Drive IO2 and IO3 enable.

Allowed values:
0: Disabled: IO2 and IO3 are not driven in single wire mode
1: High: IO2 and IO3 are driven high in single wire mode

SYSCFG

0x40010000: System configuration controller

28/28 fields covered. Toggle Registers.

CFG0

System configuration register 0

Offset: 0x0, reset: 0x00000000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
PB9_HCCE
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TIMER16_DMA_RMP
rw 		TIMER15_DMA_RMP
rw 		USART0_RX_DMA_RMP
rw 		USART0_TX_DMA_RMP
rw 		ADC_DMA_RMP
rw 		BOOT_MODE
r
Toggle Fields.

BOOT_MODE

Bits 0-1: Boot mode.

Allowed values:
0: Flash: Boot from main flash
1: SystemMemory: Boot from system memory
3: SRAM: Boot from embedded SRAM

ADC_DMA_RMP

Bit 8: ADC DMA request remapping enable.

Allowed values:
0: Channel0: ADC DMA requests are mapped to DMA channel 0
1: Channel1: ADC DMA requests are remapped to DMA channel 1

USART0_TX_DMA_RMP

Bit 9: USART0_TX DMA request remapping enable.

Allowed values:
0: Channel1: USART0 TX DMA requests are mapped to DMA channel 1
1: Channel3: USART0 TX DMA requests are remapped to DMA channel 3

USART0_RX_DMA_RMP

Bit 10: USART0_RX DMA request remapping enable.

Allowed values:
0: Channel2: USART0 RX DMA requests are mapped to DMA channel 2
1: Channel4: USART0 RX DMA requests are remapped to DMA channel 4

TIMER15_DMA_RMP

Bit 11: Timer 15 DMA request remapping enable.

Allowed values:
0: Channel2: Timer 15 DMA requests are mapped to DMA channel 2
1: Channel3: Timer 15 DMA requests are remapped to DMA channel 3

TIMER16_DMA_RMP

Bit 12: Timer 16 DMA request remapping enable.

Allowed values:
0: Channel0: Timer 16 DMA requests are mapped to DMA channel 0
1: Channel1: Timer 16 DMA requests are remapped to DMA channel 1

PB9_HCCE

Bit 19: PB9 pin high current capability enable.

Allowed values:
0: LowCurrent: High current capability is disabled
1: HighCurrent: High current capability is enabled, and speed control is bypassed

CFG1

System configuration register 1

Offset: 0x4, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SLCD_DECA
rw
Toggle Fields.

SLCD_DECA

Bits 1-3: Decoupling capacitance connection for SLCD.

Allowed values: 0-7

EXTISS0

EXTI sources selection register 0

Offset: 0x8, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI3_SS
rw 		EXTI2_SS
rw 		EXTI1_SS
rw 		EXTI0_SS
rw
Toggle Fields.

EXTI0_SS

Bits 0-3: EXTI 0 sources selection.

Allowed values:
0: PA0: PA0 pin
1: PB0: PB0 pin
2: PC0: PC0 pin
5: PF0: PF0 pin

EXTI1_SS

Bits 4-7: EXTI 1 sources selection.

Allowed values:
0: PA1: PA1 pin
1: PB1: PB1 pin
2: PC1: PC1 pin
5: PF1: PF1 pin

EXTI2_SS

Bits 8-11: EXTI 2 sources selection.

Allowed values:
0: PA2: PA2 pin
1: PB2: PB2 pin
2: PC2: PC2 pin
3: PD2: PD2 pin

EXTI3_SS

Bits 12-15: EXTI 3 sources selection.

Allowed values:
0: PA3: PA3 pin
1: PB3: PB3 pin
2: PC3: PC3 pin

EXTISS1

EXTI sources selection register 1

Offset: 0xC, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI7_SS
rw 		EXTI6_SS
rw 		EXTI5_SS
rw 		EXTI4_SS
rw
Toggle Fields.

EXTI4_SS

Bits 0-3: EXTI 4 sources selection.

Allowed values:
0: PA4: PA4 pin
1: PB4: PB4 pin
2: PC4: PC4 pin
5: PF4: PF4 pin

EXTI5_SS

Bits 4-7: EXTI 5 sources selection.

Allowed values:
0: PA5: PA5 pin
1: PB5: PB5 pin
2: PC5: PC5 pin
5: PF5: PF5 pin

EXTI6_SS

Bits 8-11: EXTI 6 sources selection.

Allowed values:
0: PA6: PA6 pin
1: PB6: PB6 pin
2: PC6: PC6 pin
5: PF6: PF6 pin

EXTI7_SS

Bits 12-15: EXTI 7 sources selection.

Allowed values:
0: PA7: PA7 pin
1: PB7: PB7 pin
2: PC7: PC7 pin
5: PF7: PF7 pin

EXTISS2

EXTI sources selection register 2

Offset: 0x10, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI11_SS
rw 		EXTI10_SS
rw 		EXTI9_SS
rw 		EXTI8_SS
rw
Toggle Fields.

EXTI8_SS

Bits 0-3: EXTI 8 sources selection.

Allowed values:
0: PA8: PA8 pin
1: PB8: PB8 pin
2: PC8: PC8 pin

EXTI9_SS

Bits 4-7: EXTI 9 sources selection.

Allowed values:
0: PA9: PA9 pin
1: PB9: PB9 pin
2: PC9: PC9 pin

EXTI10_SS

Bits 8-11: EXTI 10 sources selection.

Allowed values:
0: PA10: PA10 pin
1: PB10: PB10 pin
2: PC10: PC10 pin

EXTI11_SS

Bits 12-15: EXTI 11 sources selection.

Allowed values:
0: PA11: PA11 pin
1: PB11: PB11 pin
2: PC11: PC11 pin

EXTISS3

EXTI sources selection register 3

Offset: 0x14, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EXTI15_SS
rw 		EXTI14_SS
rw 		EXTI13_SS
rw 		EXTI12_SS
rw
Toggle Fields.

EXTI12_SS

Bits 0-3: EXTI 12 sources selection.

Allowed values:
0: PA12: PA12 pin
1: PB12: PB12 pin
2: PC12: PC12 pin

EXTI13_SS

Bits 4-7: EXTI 13 sources selection.

Allowed values:
0: PA13: PA13 pin
1: PB13: PB13 pin
2: PC13: PC13 pin

EXTI14_SS

Bits 8-11: EXTI 14 sources selection.

Allowed values:
0: PA14: PA14 pin
1: PB14: PB14 pin
2: PC14: PC14 pin

EXTI15_SS

Bits 12-15: EXTI 15 sources selection.

Allowed values:
0: PA15: PA15 pin
1: PB15: PB15 pin
2: PC15: PC15 pin

CFG2

System configuration register 2

Offset: 0x18, reset: 0x00000000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
SRAM_PCEF
rw 		LVD_LOCK
rw 		SRAM_PARITY_ERROR_LOCK
rw 		LOCKUP_LOCK
rw
Toggle Fields.

LOCKUP_LOCK

Bit 0: Cortex-M3 LOCKUP output lock.

Allowed values:
0: Unlocked: The Cortex-M3 LOCKUP output is disconnected from the break input
1: Locked: The Cortex-M3 LOCKUP output is connected to the break input

SRAM_PARITY_ERROR_LOCK

Bit 1: SRAM parity check error lock.

Allowed values:
0: Unlocked: The SRAM parity check error is disconnected from the break input
1: Locked: The SRAM parity check error is connected to the break input

LVD_LOCK

Bit 2: LVD lock.

Allowed values:
0: Unlocked: The LVD interrupt is disconnected from the break input
1: Locked: The LVD interrupt is connected to the break input

SRAM_PCEF

Bit 8: SRAM parity check error flag.

Allowed values:
0: NoError: No SRAM parity check error detected
1: Error: SRAM parity check error detected

TIMER0

0x40012C00: Advanced-timers

130/130 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		CAM
rw 		DIR
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:
0: Disabled: Counter disabled
1: Enabled: Counter enabled

UPDIS

Bit 1: Update disable.

Allowed values:
0: Enabled: Update event enabled
1: Disabled: Update event disabled

UPS

Bit 2: Update source.

Allowed values:
0: AnyEvent: Any of counter overflow/underflow, setting UPG, or update through slave mode, generates an update interrupt or DMA request
1: CounterOnly: Only counter overflow/underflow generates an update interrupt or DMA request

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:
0: Up: Counter used as upcounter
1: Down: Counter used as downcounter

CAM

Bits 5-6: Counter aligns mode selection.

Allowed values:
0: EdgeAligned: The counter counts up or down depending on the direction bit
1: CenterAlignedCountingDown: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting down.
2: CenterAlignedCountingUp: The counter counts up and down alternatively. Output compare interrupt flags are set only when the counter is counting up.
3: CenterAlignedCountingUpDown: The counter counts up and down alternatively. Output compare interrupt flags are set both when the counter is counting up or down.

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:
0: Disabled: The shadow register for CAR is disabled
1: Enabled: The shadow register for CAR is enabled

CKDIV

Bits 8-9: Clock division.

Allowed values:
0: Div1: t_DTS = t_CK_INT
1: Div2: t_DTS = 2 × t_CK_INT
2: Div4: t_DTS = 4 × t_CK_INT

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISO3
rw 		ISO2N
rw 		ISO2
rw 		ISO1N
rw 		ISO1
rw 		ISO0N
rw 		ISO0
rw 		TI0S
rw 		MMC
rw 		DMAS
rw 		CCUC
rw 		CCSE
rw
Toggle Fields.

CCSE

Bit 0: Commutation control shadow register enable.

Allowed values:
0: NotPreloaded: The shadow registers for CHxEN, CHxNEN and CHxCOMCTL bits are disabled
1: Preloaded: The shadow registers for CHxEN, CHxNEN and CHxCOMCTL bits are enabled

CCUC

Bit 2: Commutation control shadow register update control.

Allowed values:
0: Default: Capture/compare are updated only by setting the CMTG bit
1: WithRisingEdge: Capture/compare are updated by setting the CMTG bit or when an rising edge occurs on TRGI

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMC

Bits 4-6: Master mode control.

Allowed values:
0: Reset: Use UPG bit from SWEVG register
1: Enable: Use CEN bit from CTL0 register
2: Update: Use the update event
3: CaptureComparePulse: The trigger output send a positive pulse when a capture or a compare match occurred in channel 0
4: CompareO0C: O0CPRE signal is used as trigger output
5: CompareO1C: O1CPRE signal is used as trigger output
6: CompareO2C: O2CPRE signal is used as trigger output
7: CompareO3C: O3CPRE signal is used as trigger output

TI0S

Bit 7: Channel 0 trigger input selection.

Allowed values:
0: Normal: The CH0 pin input is selected as channel 0 trigger input
1: XOR: The XOR of CH0, CH1 and CH2 pins are selected as channel 0 trigger input

ISO0

Bit 8: Idle state of channel 0 output.

Allowed values:
0: Low: CHn_O=0 (after a dead-time if CHn_ON is implemented) when POEN=0
1: High: CHn_O=1 (after a dead-time if CHn_ON is implemented) when POEN=0

ISO0N

Bit 9: Idle state of channel 0 complementary output.

Allowed values:
0: Low: CHn_ON=0 when POEN=0
1: High: CHn_ON=1 when POEN=0

ISO1

Bit 10: Idle state of channel 1 output.

Allowed values:

ISO1N

Bit 11: Idle state of channel 1 complementary output.

Allowed values:
0: Low: CHn_ON=0 when POEN=0
1: High: CHn_ON=1 when POEN=0

ISO2

Bit 12: Idle state of channel 2 output.

Allowed values:
0: Low: CHn_O=0 (after a dead-time if CHn_ON is implemented) when POEN=0
1: High: CHn_O=1 (after a dead-time if CHn_ON is implemented) when POEN=0

ISO2N

Bit 13: Idle state of channel 2 complementary output.

Allowed values:
0: Low: CHn_ON=0 when POEN=0
1: High: CHn_ON=1 when POEN=0

ISO3

Bit 14: Idle state of channel 3 output.

Allowed values:
0: Low: CHn_O=0 (after a dead-time if CHn_ON is implemented) when POEN=0
1: High: CHn_O=1 (after a dead-time if CHn_ON is implemented) when POEN=0

SMCFG

slave mode configuration register

Offset: 0x8, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		SMC1
rw 		ETPSC
rw 		ETFC
rw 		MSM
rw 		TRGS
rw 		OCRC
rw 		SMC
rw
Toggle Fields.

SMC

Bits 0-2: Slave mode control.

Allowed values:
0: Disabled: Slave mode disabled - if CEN=1 then the prescaler is clocked directly by the internal clock.
1: QuadratureDecoderMode0: Quadrature decoder mode 0 - Counter counts up/down on CI1FE1 edge depending on CI0FE0 level.
2: QuadratureDecoderMode1: Quadrature decoder mode 1 - Counter counts up/down on CI0FE0 edge depending on CI1FE1 level.
3: QuadratureDecoderMode2: Quadrature decoder mode 2 - Counter counts up/down on both CI0FE0 and CI1FE1 edges depending on the level of the other input.
4: RestartMode: Restart Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: PauseMode: Pause Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: EventMode: Event Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: ExternalClockMode: External Clock Mode 0 - Rising edges of the selected trigger (TRGI) clock the counter.

OCRC

Bit 3: OCPRE clear source selection.

Allowed values:
0: Input: OCPRE_CLR_INT is connected to the OCPRE_CLR input
1: ETIF: OCPRE_CLR_INT is connected to ETIF

TRGS

Bits 4-6: Trigger selection.

Allowed values:
0: ITI0: Internal Trigger 0 (ITI0)
1: ITI1: Internal Trigger 1 (ITI1)
2: ITI2: Internal Trigger 2 (ITI2)
4: CI0F_ED: CI0 Edge Detector (CI0F_ED)
5: CI0FE0: Filtered Timer Input 0 (CI0FE0)
6: CI1FE1: Filtered Timer Input 1 (CI1FE1)
7: ETIFP: External Trigger input (ETIFP)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETFC

Bits 8-11: External trigger filter control.

Allowed values:
0: NoFilter: Filter disabled. fSAMP=fDTS, N=1
1: TimerCk_N2: fSAMP=fTIMER_CK, N=2
2: TimerCk_N4: fSAMP=fTIMER_CK, N=4
3: TimerCk_N8: fSAMP=fTIMER_CK, N=8
4: FDTS_Div2_N6: fSAMP=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMP=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMP=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMP=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMP=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMP=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMP=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMP=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMP=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMP=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMP=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMP=fDTS/32, N=8

ETPSC

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: External trigger prescaler disabled
1: Div2: ETI frequency divided by 2
2: Div4: ETI frequency divided by 4
3: Div8: ETI frequency divided by 8

SMC1

Bit 14: Part of SMC for enable External clock mode1.

Allowed values:
0: Disabled: External clock mode 1 disabled
1: Enabled: External clock mode 1 enabled. The counter is clocked by any active edge on the ETIF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETI is noninverted, active at high level or rising edge
1: Inverted: ETI is inverted, active at low level or falling edge

DMAINTEN

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

15/15 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGDEN
rw 		CMTDEN
rw 		CH3DEN
rw 		CH2DEN
rw 		CH1DEN
rw 		CH0DEN
rw 		UPDEN
rw 		BRKIE
rw 		TRGIE
rw 		CMTIE
rw 		CH3IE
rw 		CH2IE
rw 		CH1IE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:
0: Disabled: Update interrupt disabled
1: Enabled: Update interrupt enabled

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:
0: Disabled: Capture/compare interrupt disabled
1: Enabled: Capture/compare interrupt enabled

CH1IE

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:
0: Disabled: Capture/compare interrupt disabled
1: Enabled: Capture/compare interrupt enabled

CH2IE

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:
0: Disabled: Capture/compare interrupt disabled
1: Enabled: Capture/compare interrupt enabled

CH3IE

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:
0: Disabled: Capture/compare interrupt disabled
1: Enabled: Capture/compare interrupt enabled

CMTIE

Bit 5: CMT interrupt enable.

Allowed values:
0: Disabled: Commutation interrupt disabled
1: Enabled: Commutation interrupt enabled

TRGIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BRKIE

Bit 7: Break interrupt enable.

Allowed values:
0: Disabled: Break interrupt disabled
1: Enabled: Break interrupt enabled

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH1DEN

Bit 10: Channel 1 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH2DEN

Bit 11: Channel 2 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH3DEN

Bit 12: Channel 3 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CMTDEN

Bit 13: CMT DMA request enable.

Allowed values:
0: Disabled: Commutation DMA request disabled
1: Enabled: Commutation DMA request enabled

TRGDEN

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

INTF

status register

Offset: 0x10, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3OF
rw 		CH2OF
rw 		CH1OF
rw 		CH0OF
rw 		BRKIF
rw 		TRGIF
rw 		CMTIF
rw 		CH3IF
rw 		CH2IF
rw 		CH1IF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:
0: Clear: No update interrupt occurred
1: UpdatePending: Update interrupt pending.

CH0IF

Bit 1: Channel 0s Capture/Compare interrupt flag.

Allowed values:
0: Clear: No capture or compare interrupt occurred
1: CaptureCompare: A capture or compare event occurred

CH1IF

Bit 2: Channel 1s Capture/Compare interrupt enable.

Allowed values:
0: Clear: No capture or compare interrupt occurred
1: CaptureCompare: A capture or compare event occurred

CH2IF

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:
0: Clear: No capture or compare interrupt occurred
1: CaptureCompare: A capture or compare event occurred

CH3IF

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:
0: Clear: No capture or compare interrupt occurred
1: CaptureCompare: A capture or compare event occurred

CMTIF

Bit 5: Channel commutation interrupt flag.

Allowed values:
0: Clear: No channel commutation event occured
1: Commutation: Channel commutation event occurred

TRGIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: Clear: No trigger event occured
1: Triggered: Trigger event occurred

BRKIF

Bit 7: Break interrupt flag.

Allowed values:
0: Clear: No active level break detected
1: Break: Active level detected

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:
0: Clear: No over capture occurred
1: OverCapture: A capture event occured while CHnIF was already set

CH1OF

Bit 10: Channel 2 Capture overflow flag.

Allowed values:
0: Clear: No over capture occurred
1: OverCapture: A capture event occured while CHnIF was already set

CH2OF

Bit 11: Channel 2 Capture overflow flag.

Allowed values:
0: Clear: No over capture occurred
1: OverCapture: A capture event occured while CHnIF was already set

CH3OF

Bit 12: Channel 3 Capture overflow flag.

Allowed values:
0: Clear: No over capture occurred
1: OverCapture: A capture event occured while CHnIF was already set

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRKG
w 		TRGG
w 		CMTG
w 		CH3G
w 		CH2G
w 		CH1G
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:
1: Update: Re-initializes the timer counter and generates an update of the registers.

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:
1: CaptureCompare: Generate a capture or compare event

CH1G

Bit 2: Channel 1 capture or compare event generation.

Allowed values:
1: CaptureCompare: Generate a capture or compare event

CH2G

Bit 3: Channel 2 capture or compare event generation.

Allowed values:
1: CaptureCompare: Generate a capture or compare event

CH3G

Bit 4: Channel 3 capture or compare event generation.

Allowed values:
1: CaptureCompare: Generate a capture or compare event

CMTG

Bit 5: Channel commutation event generation.

Allowed values:
1: Update: Generate a channel commutation event, updating capture/compare control registers based on the value of CCSE

TRGG

Bit 6: Trigger event generation.

Allowed values:
1: Trigger: Generate a trigger event

BRKG

Bit 7: Break event generation.

Allowed values:
1: Break: Generate a break event

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1CAPFLT
rw 		CH1CAPPSC
rw 		CH1MS
rw 		CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:
0: Output: Channel is configured as output
1: CI0: Channel is configured as input, ISx is connected to CI0FEx
2: CI1: Channel is configured as input, ISx is connected to CI1FEx
3: ITS: Channel is configured as input, ISx is connected to ITS

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:
0: Div1: Prescaler disabled, capture on every edge
1: Div2: Capture every 2 edges
2: Div4: Capture every 4 edges
3: Div8: Capture every 8 edges

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:
0: NoFilter: Filter disabled. fSAMP=fDTS, N=1
1: TimerCk_N2: fSAMP=fTIMER_CK, N=2
2: TimerCk_N4: fSAMP=fTIMER_CK, N=4
3: TimerCk_N8: fSAMP=fTIMER_CK, N=8
4: FDTS_Div2_N6: fSAMP=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMP=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMP=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMP=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMP=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMP=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMP=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMP=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMP=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMP=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMP=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMP=fDTS/32, N=8

CH1MS

Bits 8-9: Channel 1 mode selection.

Allowed values:

CH1CAPPSC

Bits 10-11: Channel 1 input capture prescaler.

Allowed values:

CH1CAPFLT

Bits 12-15: Channel 1 input capture filter control.

Allowed values:

CHCTL1_Input

Channel control register 1 (input mode)

Offset: 0x1C, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3CAPFLT
rw 		CH3CAPPSC
rw 		CH3MS
rw 		CH2CAPFLT
rw 		CH2CAPPSC
rw 		CH2MS
rw
Toggle Fields.

CH2MS

Bits 0-1: Channel 2 mode selection.

Allowed values:

CH2CAPPSC

Bits 2-3: Channel 2 input capture prescaler.

Allowed values:

CH2CAPFLT

Bits 4-7: Channel 2 input capture filter control.

Allowed values:

CH3MS

Bits 8-9: Channel 3 mode selection.

Allowed values:

CH3CAPPSC

Bits 10-11: Channel 3 input capture prescaler.

Allowed values:

CH3CAPFLT

Bits 12-15: Channel 3 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

14/14 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3P
rw 		CH3EN
rw 		CH2NP
rw 		CH2NEN
rw 		CH2P
rw 		CH2EN
rw 		CH1NP
rw 		CH1NEN
rw 		CH1P
rw 		CH1EN
rw 		CH0NP
rw 		CH0NEN
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:
0: Disabled: Channel output is disabled
1: Enabled: Channel output is enabled

CH0P

Bit 1: Channel 0 polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH0NEN

Bit 2: Channel 0 complementary output enable.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH1EN

Bit 4: Channel 1 enable.

Allowed values:
0: Disabled: Channel output is disabled
1: Enabled: Channel output is enabled

CH1P

Bit 5: Channel 1 polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH1NEN

Bit 6: Channel 1 complementary output enable.

Allowed values:

CH1NP

Bit 7: Channel 1 complementary output polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH2EN

Bit 8: Channel 2 enable.

Allowed values:
0: Disabled: Channel output is disabled
1: Enabled: Channel output is enabled

CH2P

Bit 9: Channel 2 polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH2NEN

Bit 10: Channel 2 complementary output enable.

Allowed values:

CH2NP

Bit 11: Channel 2 complementary output polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CH3EN

Bit 12: Channel 3 enable.

Allowed values:
0: Disabled: Channel output is disabled
1: Enabled: Channel output is enabled

CH3P

Bit 13: Channel 3 polarity.

Allowed values:
0: NotInverted: Active high
1: Inverted: Active low

CNT

Counter register

Offset: 0x24, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

auto-reload register

Offset: 0x2C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload value.

Allowed values: 0-65535

CREP

repetition counter register

Offset: 0x30, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CREP
rw
Toggle Fields.

CREP

Bits 0-7: Counter repetition value.

Allowed values: 0-255

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-15: Capture or compare value of channel 0.

Allowed values: 0-65535

CH1CV

Channel 1 capture/compare value register

Offset: 0x38, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1VAL
rw
Toggle Fields.

CH1VAL

Bits 0-15: Capture or compare value of channel 1.

Allowed values: 0-65535

CH2CV

Channel 2 capture/compare value register

Offset: 0x3C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH2VAL
rw
Toggle Fields.

CH2VAL

Bits 0-15: Capture or compare value of channel 2.

Allowed values: 0-65535

CH3CV

Channel 3 capture/compare value register

Offset: 0x40, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3VAL
rw
Toggle Fields.

CH3VAL

Bits 0-15: Capture or compare value of channel 3.

Allowed values: 0-65535

CCHP

channel complementary protection register

Offset: 0x44, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POEN
rw 		OAEN
rw 		BRKP
rw 		BRKEN
rw 		ROS
rw 		IOS
rw 		PROT
rw 		DTCFG
rw
Toggle Fields.

DTCFG

Bits 0-7: Dead time configure.

Allowed values: 0-255

PROT

Bits 8-9: Complementary register protect control.

Allowed values:
0: Disabled: Write protection disabled
1: Mode0: Protection mode 0
2: Mode1: Protection mode 1
3: Mode2: Protection mode 2

IOS

Bit 10: Idle mode off-state configure.

Allowed values:
0: Disabled: When POEN is reset, the channel output signals are disabled
1: Enabled: When POEN is reset, the channel output signals are enabled

ROS

Bit 11: Run mode off-state configure.

Allowed values:
0: Disabled: When POEN is set, the channel output signals are disabled
1: Enabled: When POEN is set, the channel output signals are enabled

BRKEN

Bit 12: Break enable.

Allowed values:
0: Disabled: Break inputs disabled
1: Enabled: Break inputs enabled

BRKP

Bit 13: Break polarity.

Allowed values:
0: Inverted: BRKIN is active low
1: NotInverted: BRKIN is active high

OAEN

Bit 14: Output automatic enable.

Allowed values:
0: Manual: POEN cannot be set by hardware
1: Automatic: POEN can be set by hardware automatically at the next update event

POEN

Bit 15: Primary output enable.

Allowed values:
0: Disabled: Channel outputs are disabled
1: Enabled: Channel outputs are enabled

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA Transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

Configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw 		OUTSEL
rw
Toggle Fields.

OUTSEL

Bit 0: The output value selection.

Allowed values:
0: Normal: Normal behaviour
1: Disabled: If POEN and IOS is 0 the output is disabled

CHVSEL

Bit 1: Write Capture/Compare register selection.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER1

0x40000000: General-purpose-timers

102/102 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		CAM
rw 		DIR
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update request source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:

CAM

Bits 5-6: Counter aligns mode selection.

Allowed values:

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI0S
rw 		MMC
rw 		DMAS
rw
Toggle Fields.

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMC

Bits 4-6: Master mode control.

Allowed values:
0: Reset: Use UPG bit from SWEVG register
1: Enable: Use CEN bit from CTL0 register
2: Update: Use the update event

TI0S

Bit 7: Channel 0 trigger input selection.

Allowed values:
0: Normal: The CH0 pin input is selected as channel 0 trigger input
1: XOR: The XOR of CH0, CH1 and CH2 pins are selected as channel 0 trigger input

SMCFG

Slave mode configuration register

Offset: 0x8, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		SMC1
rw 		ETPSC
rw 		ETFC
rw 		MSM
rw 		TRGS
rw 		OCRC
rw 		SMC
rw
Toggle Fields.

SMC

Bits 0-2: Slave mode control.

Allowed values:
0: Disabled: Slave mode disabled - if CEN=1 then the prescaler is clocked directly by the internal clock.
1: QuadratureDecoderMode0: Quadrature decoder mode 0 - Counter counts up/down on CI1FE1 edge depending on CI0FE0 level.
2: QuadratureDecoderMode1: Quadrature decoder mode 1 - Counter counts up/down on CI0FE0 edge depending on CI1FE1 level.
3: QuadratureDecoderMode2: Quadrature decoder mode 2 - Counter counts up/down on both CI0FE0 and CI1FE1 edges depending on the level of the other input.
4: RestartMode: Restart Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: PauseMode: Pause Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: EventMode: Event Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: ExternalClockMode: External Clock Mode 0 - Rising edges of the selected trigger (TRGI) clock the counter.

OCRC

Bit 3: OCREF clear source selection .

Allowed values:
0: Input: OCPRE_CLR_INT is connected to the OCPRE_CLR input
1: ETIF: OCPRE_CLR_INT is connected to ETIF

TRGS

Bits 4-6: Trigger selection.

Allowed values:
0: ITI0: Internal Trigger 0 (ITI0)
1: ITI1: Internal Trigger 1 (ITI1)
2: ITI2: Internal Trigger 2 (ITI2)
4: CI0F_ED: CI0 Edge Detector (CI0F_ED)
5: CI0FE0: Filtered Timer Input 0 (CI0FE0)
6: CI1FE1: Filtered Timer Input 1 (CI1FE1)
7: ETIFP: External Trigger input (ETIFP)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETFC

Bits 8-11: External trigger filter control.

Allowed values:
0: NoFilter: Filter disabled. fSAMP=fDTS, N=1
1: TimerCk_N2: fSAMP=fTIMER_CK, N=2
2: TimerCk_N4: fSAMP=fTIMER_CK, N=4
3: TimerCk_N8: fSAMP=fTIMER_CK, N=8
4: FDTS_Div2_N6: fSAMP=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMP=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMP=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMP=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMP=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMP=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMP=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMP=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMP=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMP=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMP=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMP=fDTS/32, N=8

ETPSC

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: External trigger prescaler disabled
1: Div2: ETI frequency divided by 2
2: Div4: ETI frequency divided by 4
3: Div8: ETI frequency divided by 8

SMC1

Bit 14: Part of SMC for enable External clock mode1.

Allowed values:
0: Disabled: External clock mode 1 disabled
1: Enabled: External clock mode 1 enabled. The counter is clocked by any active edge on the ETIF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETI is noninverted, active at high level or rising edge
1: Inverted: ETI is inverted, active at low level or falling edge

DMAINTEN

DMA and interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGDEN
rw 		CH3DEN
rw 		CH2DEN
rw 		CH1DEN
rw 		CH0DEN
rw 		UPDEN
rw 		TRGIE
rw 		CH3IE
rw 		CH2IE
rw 		CH1IE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update Capture/Compare interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:

CH1IE

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:

CH2IE

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:

CH3IE

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:

TRGIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH1DEN

Bit 10: Channel 1 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH2DEN

Bit 11: Channel 2 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH3DEN

Bit 12: Channel 3 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

TRGDEN

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3OF
rw 		CH2OF
rw 		CH1OF
rw 		CH0OF
rw 		TRGIF
rw 		CH3IF
rw 		CH2IF
rw 		CH1IF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 Capture/Compare interrupt flag.

Allowed values:

CH1IF

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:

CH2IF

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:

CH3IF

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:

TRGIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: Clear: No trigger event occured
1: Triggered: Trigger event occurred

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

CH1OF

Bit 10: Channel 1 Capture overflow flag.

Allowed values:

CH2OF

Bit 11: Channel 2 Capture overflow flag.

Allowed values:

CH3OF

Bit 12: Channel 3 Capture overflow flag.

Allowed values:

SWEVG

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGG
w 		CH3G
w 		CH2G
w 		CH1G
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CH1G

Bit 2: Channel 1 capture or compare event generation.

Allowed values:

CH2G

Bit 3: Channel 2 capture or compare event generation.

Allowed values:

CH3G

Bit 4: Channel 3 capture or compare event generation.

Allowed values:

TRGG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: Generate a trigger event

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1CAPFLT
rw 		CH1CAPPSC
rw 		CH1MS
rw 		CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CH1MS

Bits 8-9: Channel 1 mode selection.

Allowed values:

CH1CAPPSC

Bits 10-11: Channel 1 input capture prescaler.

Allowed values:

CH1CAPFLT

Bits 12-15: Channel 1 input capture filter control.

Allowed values:

CHCTL1_Input

Channel control register 1 (input mode)

Offset: 0x1C, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3CAPFLT
rw 		CH3CAPPSC
rw 		CH3MS
rw 		CH2CAPFLT
rw 		CH2CAPPSC
rw 		CH2MS
rw
Toggle Fields.

CH2MS

Bits 0-1: Channel 2 mode selection.

Allowed values:

CH2CAPPSC

Bits 2-3: Channel 2 input capture prescaler.

Allowed values:

CH2CAPFLT

Bits 4-7: Channel 2 input capture filter control.

Allowed values:

CH3MS

Bits 8-9: Channel 3 mode selection.

Allowed values:

CH3CAPPSC

Bits 10-11: Channel 3 input capture prescaler.

Allowed values:

CH3CAPFLT

Bits 12-15: Channel 3 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3NP
rw 		CH3P
rw 		CH3EN
rw 		CH2NP
rw 		CH2P
rw 		CH2EN
rw 		CH1NP
rw 		CH1P
rw 		CH1EN
rw 		CH0NP
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CH1EN

Bit 4: Channel 1 enable.

Allowed values:

CH1P

Bit 5: Channel 1 polarity.

Allowed values:

CH1NP

Bit 7: Channel 1 complementary output polarity.

Allowed values:

CH2EN

Bit 8: Channel 2 enable.

Allowed values:

CH2P

Bit 9: Channel 2 polarity.

Allowed values:

CH2NP

Bit 11: Channel 2 complementary output polarity.

Allowed values:

CH3EN

Bit 12: Channel 3 enable.

Allowed values:

CH3P

Bit 13: Channel 3 polarity.

Allowed values:

CH3NP

Bit 15: Channel 3 complementary output polarity.

Allowed values:

CNT

Counter register

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-31: current counter value.

Allowed values: 0-4294967295

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CAR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-31: Low Auto-reload value.

Allowed values: 0-4294967295

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH0VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-31: Capture or compare value of channel 0.

Allowed values: 0-4294967295

CH1CV

Channel 1 capture/compare value register

Offset: 0x38, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH1VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1VAL
rw
Toggle Fields.

CH1VAL

Bits 0-31: Capture or compare value of channel 1.

Allowed values: 0-4294967295

CH2CV

Channel 2 capture/compare value registerV

Offset: 0x3C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH2VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH2VAL
rw
Toggle Fields.

CH2VAL

Bits 0-31: Capture or compare value of channel 2.

Allowed values: 0-4294967295

CH3CV

Channel 3 capture/compare value register

Offset: 0x40, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH3VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3VAL
rw
Toggle Fields.

CH3VAL

Bits 0-31: Capture or compare value of channel 3.

Allowed values: 0-4294967295

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA Transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

Configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw
Toggle Fields.

CHVSEL

Bit 1: Configuration register.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER13

0x40002000: General-purpose-timers

29/29 fields covered. Toggle Registers.

CTL0

control register 1

Offset: 0x0, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update source.

Allowed values:

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

DMAINTEN

Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 interrupt enable.

Allowed values:

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0OF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 interrupt flag.

Allowed values:

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0NP
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CNT

Counter register

Offset: 0x24, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload register.

Allowed values: 0-65535

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-15: Capture or compare value of channel 0.

Allowed values: 0-65535

IRMP

Channel input remap register

Offset: 0x50, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CI0_RMP
rw
Toggle Fields.

CI0_RMP

Bits 0-1: Channel 0 input remap.

Allowed values:
0: GPIO: Channel 0 input is connected to GPIO
1: RTCCLK: Channel 0 input is connected to RTCCLK
2: HXTAL_32: Channel 0 input is connected to HXTAL / 32
3: CKOUTSEL: Channel 0 input is connected to CKOUTSEL

CFG

configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw
Toggle Fields.

CHVSEL

Bit 1: Write Capture/Compare register selection.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER14

0x40014000: General-purpose-timers

82/82 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISO1
rw 		ISO0N
rw 		ISO0
rw 		MMC
rw 		DMAS
rw 		CCUC
rw 		CCSE
rw
Toggle Fields.

CCSE

Bit 0: Commutation control shadow register enable.

Allowed values:

CCUC

Bit 2: Commutation control shadow register update control.

Allowed values:

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMC

Bits 4-6: Master mode control.

Allowed values:
0: Reset: Use UPG bit from SWEVG register
1: Enable: Use CEN bit from CTL0 register
2: Update: Use the update event

ISO0

Bit 8: Idle state of channel 0 output.

Allowed values:

ISO0N

Bit 9: Idle state of channel 1 output.

Allowed values:

ISO1

Bit 10: Idle state of channel 1 output.

Allowed values:

SMCFG

Slave mode configuration register

Offset: 0x8, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MSM
rw 		TRGS
rw 		SMC
rw
Toggle Fields.

SMC

Bits 0-2: Slave mode control.

Allowed values:
0: Disabled: Slave mode disabled - if CEN=1 then the prescaler is clocked directly by the internal clock.
4: RestartMode: Restart Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: PauseMode: Pause Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: EventMode: Event Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: ExternalClockMode: External Clock Mode 0 - Rising edges of the selected trigger (TRGI) clock the counter.

TRGS

Bits 4-6: Trigger selection.

Allowed values:
0: ITI0: Internal Trigger 0 (ITI0)
1: ITI1: Internal Trigger 1 (ITI1)
4: CI0F_ED: CI0 Edge Detector (CI0F_ED)
5: CI0FE0: Filtered Timer Input 0 (CI0FE0)
6: CI1FE1: Filtered Timer Input 1 (CI1FE1)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

DMAINTEN

DMA and interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGDEN
rw 		CH1DEN
rw 		CH0DEN
rw 		UPDEN
rw 		BRKIE
rw 		TRGIE
rw 		CMTIE
rw 		CH1IE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:

CH1IE

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:

CMTIE

Bit 5: CMT interrupt enable.

Allowed values:

TRGIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

BRKIE

Bit 7: Break interrupt enable.

Allowed values:

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH1DEN

Bit 10: Channel 1 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

TRGDEN

Bit 14: DMA and interrupt enable register.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1OF
rw 		CH0OF
rw 		BRKIF
rw 		TRGIF
rw 		CMTIF
rw 		CH1IF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 interrupt enable.

Allowed values:

CH1IF

Bit 2: Channel 1 interrupt enable.

Allowed values:

CMTIF

Bit 5: Channel commutation interrupt flag.

Allowed values:

TRGIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: Clear: No trigger event occured
1: Triggered: Trigger event occurred

BRKIF

Bit 7: Break interrupt flag.

Allowed values:

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

CH1OF

Bit 10: Channel 1 Capture overflow flag.

Allowed values:

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRKG
w 		TRGG
w 		CMTG
w 		CH1G
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CH1G

Bit 2: Channel 1 capture or compare event generation.

Allowed values:

CMTG

Bit 5: Channel commutation event generation.

Allowed values:

TRGG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: Generate a trigger event

BRKG

Bit 7: Break generation.

Allowed values:

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1CAPFLT
rw 		CH1CAPPSC
rw 		CH1MS
rw 		CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CH1MS

Bits 8-9: Channel 1 mode selection.

Allowed values:

CH1CAPPSC

Bits 10-11: Channel 1 input capture prescaler.

Allowed values:

CH1CAPFLT

Bits 12-15: Channel 1 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

7/7 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1NP
rw 		CH1P
rw 		CH1EN
rw 		CH0NP
rw 		CH0NEN
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NEN

Bit 2: Channel 0 complementary output enable.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CH1EN

Bit 4: Channel 1 polarity.

Allowed values:

CH1P

Bit 5: Channel 1 polarity.

Allowed values:

CH1NP

Bit 7: Channel 1 complementary output polarity.

Allowed values:

CNT

Channel 0 enable

Offset: 0x24, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload value.

Allowed values: 0-65535

CREP

Counter repetition register

Offset: 0x30, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CREP
rw
Toggle Fields.

CREP

Bits 0-7: Counter repetition value.

Allowed values: 0-255

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-15: Capture or compare value of channel 0.

Allowed values: 0-65535

CH1CV

Channel 1 capture/compare value register

Offset: 0x38, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1VAL
rw
Toggle Fields.

CH1VAL

Bits 0-15: Capture or compare value of channel 1.

Allowed values: 0-65535

CCHP

Complementary Channel Protection register

Offset: 0x44, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POEN
rw 		OAEN
rw 		BRKP
rw 		BRKEN
rw 		ROS
rw 		IOS
rw 		PROT
rw 		DTCFG
rw
Toggle Fields.

DTCFG

Bits 0-7: Dead time configure.

Allowed values: 0-255

PROT

Bits 8-9: Complementary register protect control.

Allowed values:

IOS

Bit 10: Idle mode off-state configure.

Allowed values:

ROS

Bit 11: Run mode off-state configure.

Allowed values:

BRKEN

Bit 12: Break enable.

Allowed values:

BRKP

Bit 13: Break polarity.

Allowed values:

OAEN

Bit 14: Output automatic enable.

Allowed values:

POEN

Bit 15: Primary output enable.

Allowed values:

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw 		OUTSEL
rw
Toggle Fields.

OUTSEL

Bit 0: The output value selection.

Allowed values:
0: Normal: Normal behaviour
1: Disabled: If POEN and IOS is 0 the output is disabled

CHVSEL

Bit 1: Write Capture/Compare register selection.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER15

0x40014400: General-purpose-timers

56/56 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISO0N
rw 		ISO0
rw 		DMAS
rw 		CCUC
rw 		CCSE
rw
Toggle Fields.

CCSE

Bit 0: Commutation control shadow register enable.

Allowed values:

CCUC

Bit 2: Commutation control shadow register update control.

Allowed values:

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

ISO0

Bit 8: Idle state of channel 0 output.

Allowed values:

ISO0N

Bit 9: Idle state of channel 0 complementary output.

Allowed values:

DMAINTEN

DMA and interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0DEN
rw 		UPDEN
rw 		BRKIE
rw 		CMTIE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:

CMTIE

Bit 5: CMT interrupt enable.

Allowed values:

BRKIE

Bit 7: Break interrupt enable.

Allowed values:

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0OF
rw 		BRKIF
rw 		CMTIF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 interrupt flag.

Allowed values:

CMTIF

Bit 5: Channel commutation interrupt flag.

Allowed values:

BRKIF

Bit 7: Break interrupt flag.

Allowed values:

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRKG
w 		CMTG
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CMTG

Bit 5: Channel commutation event generation.

Allowed values:

BRKG

Bit 7: Break event generation.

Allowed values:

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0NP
rw 		CH0NEN
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NEN

Bit 2: Channel 0 complementary output enable.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CNT

counter

Offset: 0x24, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload value.

Allowed values: 0-65535

CREP

Counter repetition register

Offset: 0x30, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CREP
rw
Toggle Fields.

CREP

Bits 0-7: Counter repetition value.

Allowed values: 0-255

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-15: Capture or compare value of channel 0.

Allowed values: 0-65535

CCHP

Channel Complementary Protection register

Offset: 0x44, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POEN
rw 		OAEN
rw 		BRKP
rw 		BRKEN
rw 		ROS
rw 		IOS
rw 		PROT
rw 		DTCFG
rw
Toggle Fields.

DTCFG

Bits 0-7: Dead time configure.

Allowed values: 0-255

PROT

Bits 8-9: Complementary register protect control.

Allowed values:

IOS

Bit 10: Idle mode off-state configure.

Allowed values:

ROS

Bit 11: Run mode off-state configure.

Allowed values:

BRKEN

Bit 12: Break enable.

Allowed values:

BRKP

Bit 13: Break polarity.

Allowed values:

OAEN

Bit 14: Output automatic enable.

Allowed values:

POEN

Bit 15: Primary output enable.

Allowed values:

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw 		OUTSEL
rw
Toggle Fields.

OUTSEL

Bit 0: The output value selection.

Allowed values:
0: Normal: Normal behaviour
1: Disabled: If POEN and IOS is 0 the output is disabled

CHVSEL

Bit 1: Write Capture/Compare register selection.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER16

0x40014800: General-purpose-timers

56/56 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ISO0N
rw 		ISO0
rw 		DMAS
rw 		CCUC
rw 		CCSE
rw
Toggle Fields.

CCSE

Bit 0: Commutation control shadow register enable.

Allowed values:

CCUC

Bit 2: Commutation control shadow register update control.

Allowed values:

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

ISO0

Bit 8: Idle state of channel 0 output.

Allowed values:

ISO0N

Bit 9: Idle state of channel 0 complementary output.

Allowed values:

DMAINTEN

DMA and interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0DEN
rw 		UPDEN
rw 		BRKIE
rw 		CMTIE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:

CMTIE

Bit 5: CMT interrupt enable.

Allowed values:

BRKIE

Bit 7: Break interrupt enable.

Allowed values:

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0OF
rw 		BRKIF
rw 		CMTIF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 interrupt flag.

Allowed values:

CMTIF

Bit 5: Channel commutation interrupt flag.

Allowed values:

BRKIF

Bit 7: Break interrupt flag.

Allowed values:

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
BRKG
w 		CMTG
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CMTG

Bit 5: Channel commutation event generation.

Allowed values:

BRKG

Bit 7: Break event generation.

Allowed values:

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

4/4 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0NP
rw 		CH0NEN
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NEN

Bit 2: Channel 0 complementary output enable.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CNT

counter

Offset: 0x24, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload value.

Allowed values: 0-65535

CREP

Counter repetition register

Offset: 0x30, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CREP
rw
Toggle Fields.

CREP

Bits 0-7: Counter repetition value.

Allowed values: 0-255

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-15: Capture or compare value of channel 0.

Allowed values: 0-65535

CCHP

Channel Complementary Protection register

Offset: 0x44, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
POEN
rw 		OAEN
rw 		BRKP
rw 		BRKEN
rw 		ROS
rw 		IOS
rw 		PROT
rw 		DTCFG
rw
Toggle Fields.

DTCFG

Bits 0-7: Dead time configure.

Allowed values: 0-255

PROT

Bits 8-9: Complementary register protect control.

Allowed values:

IOS

Bit 10: Idle mode off-state configure.

Allowed values:

ROS

Bit 11: Run mode off-state configure.

Allowed values:

BRKEN

Bit 12: Break enable.

Allowed values:

BRKP

Bit 13: Break polarity.

Allowed values:

OAEN

Bit 14: Output automatic enable.

Allowed values:

POEN

Bit 15: Primary output enable.

Allowed values:

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw 		OUTSEL
rw
Toggle Fields.

OUTSEL

Bit 0: The output value selection.

Allowed values:
0: Normal: Normal behaviour
1: Disabled: If POEN and IOS is 0 the output is disabled

CHVSEL

Bit 1: Write Capture/Compare register selection.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER2

0x40000400: General-purpose-timers

102/102 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CKDIV
rw 		ARSE
rw 		CAM
rw 		DIR
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update request source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

DIR

Bit 4: Direction.

Allowed values:

CAM

Bits 5-6: Counter aligns mode selection.

Allowed values:

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CKDIV

Bits 8-9: Clock division.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TI0S
rw 		MMC
rw 		DMAS
rw
Toggle Fields.

DMAS

Bit 3: DMA request source selection.

Allowed values:
0: OnCompare: CCx DMA request sent when CCx event occurs
1: OnUpdate: CCx DMA request sent when update event occurs

MMC

Bits 4-6: Master mode control.

Allowed values:
0: Reset: Use UPG bit from SWEVG register
1: Enable: Use CEN bit from CTL0 register
2: Update: Use the update event

TI0S

Bit 7: Channel 0 trigger input selection.

Allowed values:
0: Normal: The CH0 pin input is selected as channel 0 trigger input
1: XOR: The XOR of CH0, CH1 and CH2 pins are selected as channel 0 trigger input

SMCFG

Slave mode configuration register

Offset: 0x8, reset: 0x0000, access: read-write

8/8 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ETP
rw 		SMC1
rw 		ETPSC
rw 		ETFC
rw 		MSM
rw 		TRGS
rw 		OCRC
rw 		SMC
rw
Toggle Fields.

SMC

Bits 0-2: Slave mode control.

Allowed values:
0: Disabled: Slave mode disabled - if CEN=1 then the prescaler is clocked directly by the internal clock.
1: QuadratureDecoderMode0: Quadrature decoder mode 0 - Counter counts up/down on CI1FE1 edge depending on CI0FE0 level.
2: QuadratureDecoderMode1: Quadrature decoder mode 1 - Counter counts up/down on CI0FE0 edge depending on CI1FE1 level.
3: QuadratureDecoderMode2: Quadrature decoder mode 2 - Counter counts up/down on both CI0FE0 and CI1FE1 edges depending on the level of the other input.
4: RestartMode: Restart Mode - Rising edge of the selected trigger input (TRGI) reinitializes the counter and generates an update of the registers.
5: PauseMode: Pause Mode - The counter clock is enabled when the trigger input (TRGI) is high. The counter stops (but is not reset) as soon as the trigger becomes low. Both start and stop of the counter are controlled.
6: EventMode: Event Mode - The counter starts at a rising edge of the trigger TRGI (but it is not reset). Only the start of the counter is controlled.
7: ExternalClockMode: External Clock Mode 0 - Rising edges of the selected trigger (TRGI) clock the counter.

OCRC

Bit 3: OCREF clear source selection .

Allowed values:
0: Input: OCPRE_CLR_INT is connected to the OCPRE_CLR input
1: ETIF: OCPRE_CLR_INT is connected to ETIF

TRGS

Bits 4-6: Trigger selection.

Allowed values:
0: ITI0: Internal Trigger 0 (ITI0)
1: ITI1: Internal Trigger 1 (ITI1)
2: ITI2: Internal Trigger 2 (ITI2)
4: CI0F_ED: CI0 Edge Detector (CI0F_ED)
5: CI0FE0: Filtered Timer Input 0 (CI0FE0)
6: CI1FE1: Filtered Timer Input 1 (CI1FE1)
7: ETIFP: External Trigger input (ETIFP)

MSM

Bit 7: Master/Slave mode.

Allowed values:
0: NoSync: No action
1: Sync: The effect of an event on the trigger input (TRGI) is delayed to allow a perfect synchronization between the current timer and its slaves (through TRGO). It is useful if we want to synchronize several timers on a single external event.

ETFC

Bits 8-11: External trigger filter control.

Allowed values:
0: NoFilter: Filter disabled. fSAMP=fDTS, N=1
1: TimerCk_N2: fSAMP=fTIMER_CK, N=2
2: TimerCk_N4: fSAMP=fTIMER_CK, N=4
3: TimerCk_N8: fSAMP=fTIMER_CK, N=8
4: FDTS_Div2_N6: fSAMP=fDTS/2, N=6
5: FDTS_Div2_N8: fSAMP=fDTS/2, N=8
6: FDTS_Div4_N6: fSAMP=fDTS/4, N=6
7: FDTS_Div4_N8: fSAMP=fDTS/4, N=8
8: FDTS_Div8_N6: fSAMP=fDTS/8, N=6
9: FDTS_Div8_N8: fSAMP=fDTS/8, N=8
10: FDTS_Div16_N5: fSAMP=fDTS/16, N=5
11: FDTS_Div16_N6: fSAMP=fDTS/16, N=6
12: FDTS_Div16_N8: fSAMP=fDTS/16, N=8
13: FDTS_Div32_N5: fSAMP=fDTS/32, N=5
14: FDTS_Div32_N6: fSAMP=fDTS/32, N=6
15: FDTS_Div32_N8: fSAMP=fDTS/32, N=8

ETPSC

Bits 12-13: External trigger prescaler.

Allowed values:
0: Div1: External trigger prescaler disabled
1: Div2: ETI frequency divided by 2
2: Div4: ETI frequency divided by 4
3: Div8: ETI frequency divided by 8

SMC1

Bit 14: Part of SMC for enable External clock mode1.

Allowed values:
0: Disabled: External clock mode 1 disabled
1: Enabled: External clock mode 1 enabled. The counter is clocked by any active edge on the ETIF signal.

ETP

Bit 15: External trigger polarity.

Allowed values:
0: NotInverted: ETI is noninverted, active at high level or rising edge
1: Inverted: ETI is inverted, active at low level or falling edge

DMAINTEN

DMA and interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGDEN
rw 		CH3DEN
rw 		CH2DEN
rw 		CH1DEN
rw 		CH0DEN
rw 		UPDEN
rw 		TRGIE
rw 		CH3IE
rw 		CH2IE
rw 		CH1IE
rw 		CH0IE
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update Capture/Compare interrupt enable.

Allowed values:

CH0IE

Bit 1: Channel 0 Capture/Compare interrupt enable.

Allowed values:

CH1IE

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:

CH2IE

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:

CH3IE

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:

TRGIE

Bit 6: Trigger interrupt enable.

Allowed values:
0: Disabled: Trigger interrupt disabled
1: Enabled: Trigger interrupt enabled

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

CH0DEN

Bit 9: Channel 0 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH1DEN

Bit 10: Channel 1 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH2DEN

Bit 11: Channel 2 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

CH3DEN

Bit 12: Channel 3 Capture/Compare DMA request enable.

Allowed values:
0: Disabled: Capture/compare DMA request disabled
1: Enabled: Capture/compare DMA request enabled

TRGDEN

Bit 14: Trigger DMA request enable.

Allowed values:
0: Disabled: Trigger DMA request disabled
1: Enabled: Trigger DMA request enabled

INTF

interrupt flag register

Offset: 0x10, reset: 0x0000, access: read-write

10/10 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3OF
rw 		CH2OF
rw 		CH1OF
rw 		CH0OF
rw 		TRGIF
rw 		CH3IF
rw 		CH2IF
rw 		CH1IF
rw 		CH0IF
rw 		UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

CH0IF

Bit 1: Channel 0 Capture/Compare interrupt flag.

Allowed values:

CH1IF

Bit 2: Channel 1 Capture/Compare interrupt enable.

Allowed values:

CH2IF

Bit 3: Channel 2 Capture/Compare interrupt enable.

Allowed values:

CH3IF

Bit 4: Channel 3 Capture/Compare interrupt enable.

Allowed values:

TRGIF

Bit 6: Trigger interrupt flag.

Allowed values:
0: Clear: No trigger event occured
1: Triggered: Trigger event occurred

CH0OF

Bit 9: Channel 0 Capture overflow flag.

Allowed values:

CH1OF

Bit 10: Channel 1 Capture overflow flag.

Allowed values:

CH2OF

Bit 11: Channel 2 Capture overflow flag.

Allowed values:

CH3OF

Bit 12: Channel 3 Capture overflow flag.

Allowed values:

SWEVG

event generation register

Offset: 0x14, reset: 0x0000, access: write-only

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TRGG
w 		CH3G
w 		CH2G
w 		CH1G
w 		CH0G
w 		UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CH0G

Bit 1: Channel 0 capture or compare event generation.

Allowed values:

CH1G

Bit 2: Channel 1 capture or compare event generation.

Allowed values:

CH2G

Bit 3: Channel 2 capture or compare event generation.

Allowed values:

CH3G

Bit 4: Channel 3 capture or compare event generation.

Allowed values:

TRGG

Bit 6: Trigger generation.

Allowed values:
1: Trigger: Generate a trigger event

CHCTL0_Input

Channel control register 0 (input mode)

Offset: 0x18, reset: 0x00000000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1CAPFLT
rw 		CH1CAPPSC
rw 		CH1MS
rw 		CH0CAPFLT
rw 		CH0CAPPSC
rw 		CH0MS
rw
Toggle Fields.

CH0MS

Bits 0-1: Channel 0 mode selection.

Allowed values:

CH0CAPPSC

Bits 2-3: Channel 0 input capture prescaler.

Allowed values:

CH0CAPFLT

Bits 4-7: Channel 0 input capture filter control.

Allowed values:

CH1MS

Bits 8-9: Channel 1 mode selection.

Allowed values:

CH1CAPPSC

Bits 10-11: Channel 1 input capture prescaler.

Allowed values:

CH1CAPFLT

Bits 12-15: Channel 1 input capture filter control.

Allowed values:

CHCTL1_Input

Channel control register 1 (input mode)

Offset: 0x1C, reset: 0x0000, access: read-write

6/6 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3CAPFLT
rw 		CH3CAPPSC
rw 		CH3MS
rw 		CH2CAPFLT
rw 		CH2CAPPSC
rw 		CH2MS
rw
Toggle Fields.

CH2MS

Bits 0-1: Channel 2 mode selection.

Allowed values:

CH2CAPPSC

Bits 2-3: Channel 2 input capture prescaler.

Allowed values:

CH2CAPFLT

Bits 4-7: Channel 2 input capture filter control.

Allowed values:

CH3MS

Bits 8-9: Channel 3 mode selection.

Allowed values:

CH3CAPPSC

Bits 10-11: Channel 3 input capture prescaler.

Allowed values:

CH3CAPFLT

Bits 12-15: Channel 3 input capture filter control.

Allowed values:

CHCTL2

Channel control register 2

Offset: 0x20, reset: 0x0000, access: read-write

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3NP
rw 		CH3P
rw 		CH3EN
rw 		CH2NP
rw 		CH2P
rw 		CH2EN
rw 		CH1NP
rw 		CH1P
rw 		CH1EN
rw 		CH0NP
rw 		CH0P
rw 		CH0EN
rw
Toggle Fields.

CH0EN

Bit 0: Channel 0 enable.

Allowed values:

CH0P

Bit 1: Channel 0 polarity.

Allowed values:

CH0NP

Bit 3: Channel 0 complementary output polarity.

Allowed values:

CH1EN

Bit 4: Channel 1 enable.

Allowed values:

CH1P

Bit 5: Channel 1 polarity.

Allowed values:

CH1NP

Bit 7: Channel 1 complementary output polarity.

Allowed values:

CH2EN

Bit 8: Channel 2 enable.

Allowed values:

CH2P

Bit 9: Channel 2 polarity.

Allowed values:

CH2NP

Bit 11: Channel 2 complementary output polarity.

Allowed values:

CH3EN

Bit 12: Channel 3 enable.

Allowed values:

CH3P

Bit 13: Channel 3 polarity.

Allowed values:

CH3NP

Bit 15: Channel 3 complementary output polarity.

Allowed values:

CNT

Counter register

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CNT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-31: current counter value.

Allowed values: 0-4294967295

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CAR
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-31: Low Auto-reload value.

Allowed values: 0-4294967295

CH0CV

Channel 0 capture/compare value register

Offset: 0x34, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH0VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH0VAL
rw
Toggle Fields.

CH0VAL

Bits 0-31: Capture or compare value of channel 0.

Allowed values: 0-4294967295

CH1CV

Channel 1 capture/compare value register

Offset: 0x38, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH1VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH1VAL
rw
Toggle Fields.

CH1VAL

Bits 0-31: Capture or compare value of channel 1.

Allowed values: 0-4294967295

CH2CV

Channel 2 capture/compare value registerV

Offset: 0x3C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH2VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH2VAL
rw
Toggle Fields.

CH2VAL

Bits 0-31: Capture or compare value of channel 2.

Allowed values: 0-4294967295

CH3CV

Channel 3 capture/compare value register

Offset: 0x40, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CH3VAL
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CH3VAL
rw
Toggle Fields.

CH3VAL

Bits 0-31: Capture or compare value of channel 3.

Allowed values: 0-4294967295

DMACFG

DMA configuration register

Offset: 0x48, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATC
rw 		DMATA
rw
Toggle Fields.

DMATA

Bits 0-4: DMA transfer access start address.

Allowed values: 0-31

DMATC

Bits 8-12: DMA transfer count.

Allowed values: 0-31

DMATB

DMA Transfer buffer register

Offset: 0x4C, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DMATB
rw
Toggle Fields.

DMATB

Bits 0-15: DMA transfer.

Allowed values: 0-65535

CFG

Configuration register

Offset: 0xFC, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CHVSEL
rw
Toggle Fields.

CHVSEL

Bit 1: Configuration register.

Allowed values:
0: Normal: Normal behaviour
1: IgnoreSame: Duplicate writes to CHxVAL are ignored

TIMER5

0x40001000: Basic-timers

13/13 fields covered. Toggle Registers.

CTL0

control register 0

Offset: 0x0, reset: 0x0000, access: read-write

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ARSE
rw 		SPM
rw 		UPS
rw 		UPDIS
rw 		CEN
rw
Toggle Fields.

CEN

Bit 0: Counter enable.

Allowed values:

UPDIS

Bit 1: Update disable.

Allowed values:

UPS

Bit 2: Update source.

Allowed values:

SPM

Bit 3: Single pulse mode.

Allowed values:
0: Disabled: Counter is not stopped at update event
1: Enabled: Counter stops counting at the next update event (clearing the CEN bit)

ARSE

Bit 7: Auto-reload shadow enable.

Allowed values:

CTL1

control register 1

Offset: 0x4, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MMC
rw
Toggle Fields.

MMC

Bits 4-6: Master mode control.

Allowed values:
0: Reset: Use UPG bit from SWEVG register
1: Enable: Use CEN bit from CTL0 register
2: Update: Use the update event

DMAINTEN

DMA/Interrupt enable register

Offset: 0xC, reset: 0x0000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UPDEN
rw 		UPIE
rw
Toggle Fields.

UPIE

Bit 0: Update interrupt enable.

Allowed values:

UPDEN

Bit 8: Update DMA request enable.

Allowed values:
0: Disabled: Update DMA request disabled
1: Enabled: Update DMA request enabled

INTF

status register

Offset: 0x10, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UPIF
rw
Toggle Fields.

UPIF

Bit 0: Update interrupt flag.

Allowed values:

SWEVG

Software event generation register

Offset: 0x14, reset: 0x0000, access: write-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
UPG
w
Toggle Fields.

UPG

Bit 0: Update generation.

Allowed values:

CNT

Counter register

Offset: 0x24, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CNT
rw
Toggle Fields.

CNT

Bits 0-15: current counter value.

Allowed values: 0-65535

PSC

Prescaler register

Offset: 0x28, reset: 0x0000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
PSC
rw
Toggle Fields.

PSC

Bits 0-15: Prescaler value of the counter clock.

Allowed values: 0-65535

CAR

Counter auto reload register

Offset: 0x2C, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CAR
rw
Toggle Fields.

CAR

Bits 0-15: Counter auto reload value.

Allowed values: 0-65535

TSI

0x40024000: Touch sensing Interface

12/132 fields covered. Toggle Registers.

CTL

control register

Offset: 0x0, reset: 0x00000000, access: read-write

0/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
CDT
rw 		CTDT
rw 		ECDT
rw 		ECEN
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ECDIV
rw 		CTCDIV
rw 		MCN
rw 		PINMOD
rw 		EGSEL
rw 		TRGMOD
rw 		TSIS
rw 		TSIEN
rw
Toggle Fields.

TSIEN

Bit 0: TSI enable.

TSIS

Bit 1: TSI start.

TRGMOD

Bit 2: Trigger mode selection.

EGSEL

Bit 3: Edge selection.

PINMOD

Bit 4: Pin mode.

MCN

Bits 5-7: Max cycle number of a sequence.

CTCDIV

Bits 12-14: CTCLK clock division factor.

ECDIV

Bit 15: ECCLK clock division factor.

ECEN

Bit 16: Extend Charge State Enable.

ECDT

Bits 17-23: Extend Charge State Maximum Duration Time.

CTDT

Bits 24-27: Charge Transfer State Duration Time.

CDT

Bits 28-31: Charge State Duration Time.

INTEN

interrupt enable register

Offset: 0x4, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNERRIE
rw 		CTCFIE
rw
Toggle Fields.

CTCFIE

Bit 0: Charge-transfer complete flag Interrupt Enable.

MNERRIE

Bit 1: Max Cycle Number Error Interrupt Enable.

INTC

interrupt flag clear register

Offset: 0x8, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CMNERR
rw 		CCTCF
rw
Toggle Fields.

CCTCF

Bit 0: Clear charge-transfer complete flag.

CMNERR

Bit 1: Clear max cycle number error.

INTF

interrupt flag register

Offset: 0xC, reset: 0x00000000, access: read-write

0/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
MNERR
rw 		CTCF
rw
Toggle Fields.

CTCF

Bit 0: Charge-Transfer complete flag.

MNERR

Bit 1: Max count error flag.

PHM

Pin hysteresis mode register

Offset: 0x10, reset: 0x00000000, access: read-write

0/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
G5P3
rw 		G5P2
rw 		G5P1
rw 		G5P0
rw 		G4P3
rw 		G4P2
rw 		G4P1
rw 		G4P0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
G3P3
rw 		G3P2
rw 		G3P1
rw 		G3P0
rw 		G2P3
rw 		G2P2
rw 		G2P1
rw 		G2P0
rw 		G1P3
rw 		G1P2
rw 		G1P1
rw 		G1P0
rw 		G0P3
rw 		G0P2
rw 		G0P1
rw 		G0P0
rw
Toggle Fields.

G0P0

Bit 0: G0P0 Schmitt trigger hysteresis mode.

G0P1

Bit 1: G0P1 Schmitt trigger hysteresis mode.

G0P2

Bit 2: G0P2 Schmitt trigger hysteresis mode.

G0P3

Bit 3: G0P3 Schmitt trigger hysteresis mode.

G1P0

Bit 4: G1P0 Schmitt trigger hysteresis mode.

G1P1

Bit 5: G1P1 Schmitt trigger hysteresis mode.

G1P2

Bit 6: G1P2 Schmitt trigger hysteresis mode.

G1P3

Bit 7: G1P3 Schmitt trigger hysteresis mode.

G2P0

Bit 8: G2P0 Schmitt trigger hysteresis mode.

G2P1

Bit 9: G2P1 Schmitt trigger hysteresis mode.

G2P2

Bit 10: G2P2 Schmitt trigger hysteresis mode.

G2P3

Bit 11: G2P3 Schmitt trigger hysteresis mode.

G3P0

Bit 12: G3P0 Schmitt trigger hysteresis mode.

G3P1

Bit 13: G3P1 Schmitt trigger hysteresis mode.

G3P2

Bit 14: G3P2 Schmitt trigger hysteresis mode.

G3P3

Bit 15: G3P3 Schmitt trigger hysteresis mode.

G4P0

Bit 16: G4P0 Schmitt trigger hysteresis mode.

G4P1

Bit 17: G4P1 Schmitt trigger hysteresis mode.

G4P2

Bit 18: G4P2 Schmitt trigger hysteresis mode.

G4P3

Bit 19: G4P3 Schmitt trigger hysteresis mode.

G5P0

Bit 20: G5P0 Schmitt trigger hysteresis mode.

G5P1

Bit 21: G5P1 Schmitt trigger hysteresis mode.

G5P2

Bit 22: G5P2 Schmitt trigger hysteresis mode.

G5P3

Bit 23: G5P3 Schmitt trigger hysteresis mode.

ASW

I/O analog switch register

Offset: 0x18, reset: 0x00000000, access: read-write

0/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
G5P3
rw 		G5P2
rw 		G5P1
rw 		G5P0
rw 		G4P3
rw 		G4P2
rw 		G4P1
rw 		G4P0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
G3P3
rw 		G3P2
rw 		G3P1
rw 		G3P0
rw 		G2P3
rw 		G2P2
rw 		G2P1
rw 		G2P0
rw 		G1P3
rw 		G1P2
rw 		G1P1
rw 		G1P0
rw 		G0P3
rw 		G0P2
rw 		G0P1
rw 		G0P0
rw
Toggle Fields.

G0P0

Bit 0: G0P0 analog switch enable.

G0P1

Bit 1: G0P1 analog switch enable.

G0P2

Bit 2: G0P2 analog switch enable.

G0P3

Bit 3: G0P3 analog switch enable.

G1P0

Bit 4: G1P0 analog switch enable.

G1P1

Bit 5: G1P1 analog switch enable.

G1P2

Bit 6: G1P2 analog switch enable.

G1P3

Bit 7: G1P3 analog switch enable.

G2P0

Bit 8: G2P0 analog switch enable.

G2P1

Bit 9: G2P1 analog switch enable.

G2P2

Bit 10: G2P2 analog switch enable.

G2P3

Bit 11: G2P3 analog switch enable.

G3P0

Bit 12: G3P0 analog switch enable.

G3P1

Bit 13: G3P1 analog switch enable.

G3P2

Bit 14: G3P2 analog switch enable.

G3P3

Bit 15: G3P3 analog switch enable.

G4P0

Bit 16: G4P0 analog switch enable.

G4P1

Bit 17: G4P1 analog switch enable.

G4P2

Bit 18: G4P2 analog switch enable.

G4P3

Bit 19: G4P3 analog switch enable.

G5P0

Bit 20: G5P0 analog switch enable.

G5P1

Bit 21: G5P1 analog switch enable.

G5P2

Bit 22: G5P2 analog switch enable.

G5P3

Bit 23: G5P3 analog switch enable.

SAMPCFG

I/O sample configuration register

Offset: 0x20, reset: 0x00000000, access: read-write

0/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
G5P3
rw 		G5P2
rw 		G5P1
rw 		G5P0
rw 		G4P3
rw 		G4P2
rw 		G4P1
rw 		G4P0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
G3P3
rw 		G3P2
rw 		G3P1
rw 		G3P0
rw 		G2P3
rw 		G2P2
rw 		G2P1
rw 		G2P0
rw 		G1P3
rw 		G1P2
rw 		G1P1
rw 		G1P0
rw 		G0P3
rw 		G0P2
rw 		G0P1
rw 		G0P0
rw
Toggle Fields.

G0P0

Bit 0: G0P0 sampling mode.

G0P1

Bit 1: G0P1 sampling mode.

G0P2

Bit 2: G0P2 sampling mode.

G0P3

Bit 3: G0P3 sampling mode.

G1P0

Bit 4: G1P0 sampling mode.

G1P1

Bit 5: G1P1 sampling mode.

G1P2

Bit 6: G1P2 sampling mode.

G1P3

Bit 7: G1P3 sampling mode.

G2P0

Bit 8: G2P0 sampling mode.

G2P1

Bit 9: G2P1 sampling mode.

G2P2

Bit 10: G2P2 sampling mode.

G2P3

Bit 11: G2P3 sampling mode.

G3P0

Bit 12: G3P0 sampling mode.

G3P1

Bit 13: G3P1 sampling mode.

G3P2

Bit 14: G3P2 sampling mode.

G3P3

Bit 15: G3P3 sampling mode.

G4P0

Bit 16: G4P0 sampling mode.

G4P1

Bit 17: G4P1 sampling mode.

G4P2

Bit 18: G4P2 sampling mode.

G4P3

Bit 19: G4P3 sampling mode.

G5P0

Bit 20: G5P0 sampling mode.

G5P1

Bit 21: G5P1 sampling mode.

G5P2

Bit 22: G5P2 sampling mode.

G5P3

Bit 23: G5P3 sampling mode.

CHCFG

I/O channel configuration register

Offset: 0x28, reset: 0x00000000, access: read-write

0/24 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
G5P3
rw 		G5P2
rw 		G5P1
rw 		G5P0
rw 		G4P3
rw 		G4P2
rw 		G4P1
rw 		G4P0
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
G3P3
rw 		G3P2
rw 		G3P1
rw 		G3P0
rw 		G2P3
rw 		G2P2
rw 		G2P1
rw 		G2P0
rw 		G1P3
rw 		G1P2
rw 		G1P1
rw 		G1P0
rw 		G0P3
rw 		G0P2
rw 		G0P1
rw 		G0P0
rw
Toggle Fields.

G0P0

Bit 0: G0P0 channel mode.

G0P1

Bit 1: G0P1 channel mode.

G0P2

Bit 2: G0P2 channel mode.

G0P3

Bit 3: G0P3 channel mode.

G1P0

Bit 4: G1P0 channel mode.

G1P1

Bit 5: G1P1 channel mode.

G1P2

Bit 6: G1P2 channel mode.

G1P3

Bit 7: G1P3 channel mode.

G2P0

Bit 8: G2P0 channel mode.

G2P1

Bit 9: G2P1 channel mode.

G2P2

Bit 10: G2P2 channel mode.

G2P3

Bit 11: G2P3 channel mode.

G3P0

Bit 12: G3P0 channel mode.

G3P1

Bit 13: G3P1 channel mode.

G3P2

Bit 14: G3P2 channel mode.

G3P3

Bit 15: G3P3 channel mode.

G4P0

Bit 16: G4P0 channel mode.

G4P1

Bit 17: G4P1 channel mode.

G4P2

Bit 18: G4P2 channel mode.

G4P3

Bit 19: G4P3 channel mode.

G5P0

Bit 20: G5P0 channel mode.

G5P1

Bit 21: G5P1 channel mode.

G5P2

Bit 22: G5P2 channel mode.

G5P3

Bit 23: G5P3 channel mode.

GCTL

I/O group control register

Offset: 0x30, reset: 0x00000000, access: Unspecified

6/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
GC5
r 		GC4
r 		GC3
r 		GC2
r 		GC1
r 		GC0
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GE5
rw 		GE4
rw 		GE3
rw 		GE2
rw 		GE1
rw 		GE0
rw
Toggle Fields.

GE0

Bit 0: Analog I/O group 0 enable.

GE1

Bit 1: Analog I/O group 1 enable.

GE2

Bit 2: Analog I/O group 2 enable.

GE3

Bit 3: Analog I/O group 3 enable.

GE4

Bit 4: Analog I/O group 4 enable.

GE5

Bit 5: Analog I/O group 5 enable.

GC0

Bit 16: Analog I/O group 0 status.

GC1

Bit 17: Analog I/O group 1 status.

GC2

Bit 18: Analog I/O group 2 status.

GC3

Bit 19: Analog I/O group 3 status.

GC4

Bit 20: Analog I/O group 4 status.

GC5

Bit 21: Analog I/O group 5 status.

G0CYCN

I/O group x cycle number register

Offset: 0x34, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

G1CYCN

I/O group x cycle number register

Offset: 0x38, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

G2CYCN

I/O group x cycle number register

Offset: 0x3C, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

G3CYCN

I/O group x cycle number register

Offset: 0x40, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

G4CYCN

I/O group x cycle number register

Offset: 0x44, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

G5CYCN

I/O group x cycle number register

Offset: 0x48, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
CYCN
r
Toggle Fields.

CYCN

Bits 0-13: Cycle number.

USART0

0x40013800: Universal synchronous asynchronous receiver transmitter

104/104 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x00000000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EBIE
rw 		RTIE
rw 		DEA
rw 		DED
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVSMOD
rw 		AMIE
rw 		MEN
rw 		WL
rw 		WM
rw 		PCEN
rw 		PM
rw 		PERRIE
rw 		TBEIE
rw 		TCIE
rw 		RBNEIE
rw 		IDLEIE
rw 		TEN
rw 		REN
rw 		UESM
rw 		UEN
rw
Toggle Fields.

UEN

Bit 0: USART enable.

Allowed values:
0: Disabled: USART prescaler and outputs disabled
1: Enabled: USART prescaler and outputs enabled

UESM

Bit 1: USART enable in Deep-sleep mode.

Allowed values:
0: Disabled: USART not able to wake the MCU from deep-sleep mode
1: Enabled: USART is able to wake the MCU from deep-sleep mode, as long as the clock source for the USART is IRC8M or LXTAL

REN

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TEN

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE line detected interrupt enable.

Allowed values:
0: Disabled: Idle line detected interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLEF=1 in the STAT register

RBNEIE

Bit 5: Read data buffer not empty interrupt and overrun error interrupt enable.

Allowed values:
0: Disabled: Read data buffer not empty and overrrun error interrupts are disabled
1: Enabled: Interrupt is generated whenever ORERR=1 or RBNE=1 in the STAT register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Transmission complete interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the STAT register

TBEIE

Bit 7: Transmitter register empty interrupt enable.

Allowed values:
0: Disabled: Transmission register empty interrupt is disabled
1: Enabled: Interrupt is generated whenever TBE=1 in the STAT register

PERRIE

Bit 8: Parity error interrupt enable.

Allowed values:
0: Disabled: Parity error interrupt is disabled
1: Enabled: Interrupt is generated whenever PERR=1 in the STAT register

PM

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCEN

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WM

Bit 11: Wakeup method in mute mode.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

WL

Bit 12: Word length.

Allowed values:
0: Bit8: 8 data bits
1: Bit9: 9 data bits

MEN

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

AMIE

Bit 14: ADDR match interrupt enable.

Allowed values:
0: Disabled: Address match interrupt is disabled
1: Enabled: Address match interrupt is enabled

OVSMOD

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DED

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0-31

DEA

Bits 21-25: Driver Enable assertion time.

Allowed values: 0-31

RTIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Receiver timeout interrupt is disabled
1: Enabled: Receiver timeout interrupt is enabled

EBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: End of block interrupt is disabled
1: Enabled: End of block interrupt is enabled

CTL1

Control register 1

Offset: 0x4, reset: 0x00000000, access: read-write

18/18 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDR
rw 		RTEN
rw 		ABDM
rw 		ABDEN
rw 		MSBF
rw 		DINV
rw 		TINV
rw 		RINV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STRP
rw 		LMEN
rw 		STB
rw 		CKEN
rw 		CPL
rw 		CPH
rw 		CLEN
rw 		LBDIE
rw 		LBLEN
rw 		ADDM
rw
Toggle Fields.

ADDM

Bit 4: Address detection mode.

Allowed values:
0: Bit4: 4-bit address detection
1: Full: Full-bit address detection

LBLEN

Bit 5: LIN break frame length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: An interrupt is generated whenever LBDF=1 in the STAT register

CLEN

Bit 8: CK length.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPH

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPL

Bit 10: Clock polarity.

Allowed values:
0: NotInverted: Steady low value on CK pin outside tranmission window
1: Inverted: Steady high value on CK pin outside tranmission window

CKEN

Bit 11: CK pin enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STB

Bits 12-13: STOP bits length.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LMEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

STRP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RINV

Bit 16: RX pin level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TINV

Bit 17: TX pin level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DINV

Bit 18: Data bit level inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBF

Bit 19: Most significant bit first.

Allowed values:
0: LSB: Data is transmitted/received with data bit 0 first, following the start bit
1: MSB: Data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABDEN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABDM

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement

RTEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADDR

Bits 24-31: Address of the USART terminal.

Allowed values: 0-255

CTL2

Control register 2

Offset: 0x8, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUIE
rw 		WUM
rw 		SCRTNUM
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEP
rw 		DEM
rw 		DDRE
rw 		OVRD
rw 		OSB
rw 		CTSIE
rw 		CTSEN
rw 		RTSEN
rw 		DENT
rw 		DENR
rw 		SCEN
rw 		NKEN
rw 		HDEN
rw 		IRLP
rw 		IREN
rw 		ERRIE
rw
Toggle Fields.

ERRIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt is disabled
1: Enabled: An interrupt is generated when FERR=1 or ORERR=1 or NERR=1 in the STAT register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDEN

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NKEN

Bit 4: NKEN enable in Smartcard mode.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DENR

Bit 6: DMA enable for reception.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DENT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSEN

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSEN

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: An interrupt is generated whenever CTS=1 in the STAT register

OSB

Bit 11: One sample bit method.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRD

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDATA register

DDRE

Bit 13: Disable DMA on reception error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity mode.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCRTNUM

Bits 17-19: Smartcard auto-retry number.

Allowed values: 0-7

WUM

Bits 20-21: Wakeup mode from Deep-sleep mode.

Allowed values:
0: Address: WUF active on address match
2: Start: WUF active on start bit detection
3: RXNE: WUF active on RBNE

WUIE

Bit 22: Wakeup from Deep-sleep mode interrupt enable.

Allowed values:
0: Disabled: Wake-up from deep-sleep mode interrupt is disabled
1: Enabled: Wake-up from deep-sleep mode interrupt is generated whenever WUF=1 in the STAT register

BAUD

Baud rate generator register

Offset: 0xC, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTDIV
rw 		FRADIV
rw
Toggle Fields.

FRADIV

Bits 0-3: Fraction part of baud-rate divider.

Allowed values: 0-15

INTDIV

Bits 4-15: Integer part of baud-rate divider.

Allowed values: 0-4095

GP

Prescaler and guard time configuration register

Offset: 0x10, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GUAT
rw 		PSC
rw
Toggle Fields.

PSC

Bits 0-7: Prescaler value for dividing the system clock.

Allowed values: 0-255

GUAT

Bits 8-15: Guard time value in smartcard mode.

Allowed values: 0-255

RT

Receiver timeout register

Offset: 0x14, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BL
rw 		RT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RT
rw
Toggle Fields.

RT

Bits 0-23: Receiver timeout value.

Allowed values: 0-16777215

BL

Bits 24-31: Block Length.

Allowed values: 0-255

CMD

Request register

Offset: 0x18, reset: 0x00000000, access: write-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFCMD
w 		RXFCMD
w 		MMCMD
w 		SBKCMD
w 		ABDCMD
w
Toggle Fields.

ABDCMD

Bit 0: Auto baudrate detection command.

Allowed values:
1: Request: Resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKCMD

Bit 1: Send break command.

Allowed values:
1: Break: Sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMCMD

Bit 2: Mute mode command.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFCMD

Bit 3: Receive data flush command.

Allowed values:
1: Discard: Clears the RBNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFCMD

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TBE flag. This allows to discard the transmit data

STAT

Interrupt & status register

Offset: 0x1C, reset: 0x000000C0, access: read-only

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
REA
r 		TEA
r 		WUF
r 		RWU
r 		SBF
r 		AMF
r 		BSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ABDF
r 		ABDE
r 		EBF
r 		RTF
r 		CTS
r 		CTSF
r 		LBDF
r 		TBE
r 		TC
r 		RBNE
r 		IDLEF
r 		ORERR
r 		NERR
r 		FERR
r 		PERR
r
Toggle Fields.

PERR

Bit 0: Parity error flag.

FERR

Bit 1: Frame error flag.

NERR

Bit 2: Noise error flag.

ORERR

Bit 3: Overrun error.

IDLEF

Bit 4: IDLE line detected flag.

RBNE

Bit 5: Read data buffer not empty.

TC

Bit 6: Transmission complete.

TBE

Bit 7: Transmit data register empty.

LBDF

Bit 8: LIN break detection flag.

CTSF

Bit 9: CTS change flag.

CTS

Bit 10: CTS level.

RTF

Bit 11: Receiver timeout.

EBF

Bit 12: End of block flag.

ABDE

Bit 14: Auto baudrate detection error.

ABDF

Bit 15: Auto baudrate detection flag.

BSY

Bit 16: Busy flag.

AMF

Bit 17: ADDR match flag.

SBF

Bit 18: Send break flag.

RWU

Bit 19: Receiver wakeup from Mute mode.

WUF

Bit 20: Wakeup from Deep-sleep mode flag.

TEA

Bit 21: Transmit enable acknowledge flag.

REA

Bit 22: Receive enable acknowledge flag.

INTC

Interrupt flag clear register

Offset: 0x20, reset: 0x00000000, access: write-only

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUC
w 		AMC
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EBC
w 		RTC
w 		CTSC
w 		LBDC
w 		TCC
w 		IDLEC
w 		OREC
w 		NEC
w 		FEC
w 		PEC
w
Toggle Fields.

PEC

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PERR bit in the STAT register

FEC

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FERR bit in the STAT register

NEC

Bit 2: Noise detected clear.

Allowed values:
1: Clear: Clears the NERR bit in the STAT register

OREC

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORERR bit in the STAT register

IDLEC

Bit 4: Idle line detected clear.

Allowed values:
1: Clear: Clears the IDLEF flag in the STAT register

TCC

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC bit in the STAT register

LBDC

Bit 8: LIN break detected clear.

Allowed values:
1: Clear: Clears the LBDF flag in the STAT register

CTSC

Bit 9: CTS change clear.

Allowed values:
1: Clear: Clears the CTSF flag in the STAT register

RTC

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RCF flag in the STAT register

EBC

Bit 12: End of timeout clear.

Allowed values:
1: Clear: Clears the EBF flag in the STAT register

AMC

Bit 17: ADDR match clear.

Allowed values:
1: Clear: Clears the AMF flag in the STAT register

WUC

Bit 20: Wakeup from Deep-sleep mode clear.

Allowed values:
1: Clear: Clears the WUF flag in the STAT register

RDATA

Receive data register

Offset: 0x24, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDATA
r
Toggle Fields.

RDATA

Bits 0-8: Receive data value.

Allowed values: 0-511

TDATA

Transmit data register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDATA
rw
Toggle Fields.

TDATA

Bits 0-8: Transmit data value.

Allowed values: 0-255

USART1

0x40004400: Universal synchronous asynchronous receiver transmitter

104/104 fields covered. Toggle Registers.

CTL0

Control register 0

Offset: 0x0, reset: 0x00000000, access: read-write

20/20 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
EBIE
rw 		RTIE
rw 		DEA
rw 		DED
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
OVSMOD
rw 		AMIE
rw 		MEN
rw 		WL
rw 		WM
rw 		PCEN
rw 		PM
rw 		PERRIE
rw 		TBEIE
rw 		TCIE
rw 		RBNEIE
rw 		IDLEIE
rw 		TEN
rw 		REN
rw 		UESM
rw 		UEN
rw
Toggle Fields.

UEN

Bit 0: USART enable.

Allowed values:
0: Disabled: USART prescaler and outputs disabled
1: Enabled: USART prescaler and outputs enabled

UESM

Bit 1: USART enable in Deep-sleep mode.

Allowed values:
0: Disabled: USART not able to wake the MCU from deep-sleep mode
1: Enabled: USART is able to wake the MCU from deep-sleep mode, as long as the clock source for the USART is IRC8M or LXTAL

REN

Bit 2: Receiver enable.

Allowed values:
0: Disabled: Receiver is disabled
1: Enabled: Receiver is enabled

TEN

Bit 3: Transmitter enable.

Allowed values:
0: Disabled: Transmitter is disabled
1: Enabled: Transmitter is enabled

IDLEIE

Bit 4: IDLE line detected interrupt enable.

Allowed values:
0: Disabled: Idle line detected interrupt is disabled
1: Enabled: Interrupt is generated whenever IDLEF=1 in the STAT register

RBNEIE

Bit 5: Read data buffer not empty interrupt and overrun error interrupt enable.

Allowed values:
0: Disabled: Read data buffer not empty and overrrun error interrupts are disabled
1: Enabled: Interrupt is generated whenever ORERR=1 or RBNE=1 in the STAT register

TCIE

Bit 6: Transmission complete interrupt enable.

Allowed values:
0: Disabled: Transmission complete interrupt is disabled
1: Enabled: Interrupt is generated whenever TC=1 in the STAT register

TBEIE

Bit 7: Transmitter register empty interrupt enable.

Allowed values:
0: Disabled: Transmission register empty interrupt is disabled
1: Enabled: Interrupt is generated whenever TBE=1 in the STAT register

PERRIE

Bit 8: Parity error interrupt enable.

Allowed values:
0: Disabled: Parity error interrupt is disabled
1: Enabled: Interrupt is generated whenever PERR=1 in the STAT register

PM

Bit 9: Parity selection.

Allowed values:
0: Even: Even parity
1: Odd: Odd parity

PCEN

Bit 10: Parity control enable.

Allowed values:
0: Disabled: Parity control disabled
1: Enabled: Parity control enabled

WM

Bit 11: Wakeup method in mute mode.

Allowed values:
0: Idle: Idle line
1: Address: Address mask

WL

Bit 12: Word length.

Allowed values:
0: Bit8: 8 data bits
1: Bit9: 9 data bits

MEN

Bit 13: Mute mode enable.

Allowed values:
0: Disabled: Receiver in active mode permanently
1: Enabled: Receiver can switch between mute mode and active mode

AMIE

Bit 14: ADDR match interrupt enable.

Allowed values:
0: Disabled: Address match interrupt is disabled
1: Enabled: Address match interrupt is enabled

OVSMOD

Bit 15: Oversampling mode.

Allowed values:
0: Oversampling16: Oversampling by 16
1: Oversampling8: Oversampling by 8

DED

Bits 16-20: Driver Enable deassertion time.

Allowed values: 0-31

DEA

Bits 21-25: Driver Enable assertion time.

Allowed values: 0-31

RTIE

Bit 26: Receiver timeout interrupt enable.

Allowed values:
0: Disabled: Receiver timeout interrupt is disabled
1: Enabled: Receiver timeout interrupt is enabled

EBIE

Bit 27: End of Block interrupt enable.

Allowed values:
0: Disabled: End of block interrupt is disabled
1: Enabled: End of block interrupt is enabled

CTL1

Control register 1

Offset: 0x4, reset: 0x00000000, access: read-write

18/18 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
ADDR
rw 		RTEN
rw 		ABDM
rw 		ABDEN
rw 		MSBF
rw 		DINV
rw 		TINV
rw 		RINV
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
STRP
rw 		LMEN
rw 		STB
rw 		CKEN
rw 		CPL
rw 		CPH
rw 		CLEN
rw 		LBDIE
rw 		LBLEN
rw 		ADDM
rw
Toggle Fields.

ADDM

Bit 4: Address detection mode.

Allowed values:
0: Bit4: 4-bit address detection
1: Full: Full-bit address detection

LBLEN

Bit 5: LIN break frame length.

Allowed values:
0: Bit10: 10-bit break detection
1: Bit11: 11-bit break detection

LBDIE

Bit 6: LIN break detection interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: An interrupt is generated whenever LBDF=1 in the STAT register

CLEN

Bit 8: CK length.

Allowed values:
0: NotOutput: The clock pulse of the last data bit is not output to the CK pin
1: Output: The clock pulse of the last data bit is output to the CK pin

CPH

Bit 9: Clock phase.

Allowed values:
0: First: The first clock transition is the first data capture edge
1: Second: The second clock transition is the first data capture edge

CPL

Bit 10: Clock polarity.

Allowed values:
0: NotInverted: Steady low value on CK pin outside tranmission window
1: Inverted: Steady high value on CK pin outside tranmission window

CKEN

Bit 11: CK pin enable.

Allowed values:
0: Disabled: CK pin disabled
1: Enabled: CK pin enabled

STB

Bits 12-13: STOP bits length.

Allowed values:
0: Stop1: 1 stop bit
1: Stop0p5: 0.5 stop bit
2: Stop2: 2 stop bit
3: Stop1p5: 1.5 stop bit

LMEN

Bit 14: LIN mode enable.

Allowed values:
0: Disabled: LIN mode disabled
1: Enabled: LIN mode enabled

STRP

Bit 15: Swap TX/RX pins.

Allowed values:
0: Standard: TX/RX pins are used as defined in standard pinout
1: Swapped: The TX and RX pins functions are swapped

RINV

Bit 16: RX pin level inversion.

Allowed values:
0: Standard: RX pin signal works using the standard logic levels
1: Inverted: RX pin signal values are inverted

TINV

Bit 17: TX pin level inversion.

Allowed values:
0: Standard: TX pin signal works using the standard logic levels
1: Inverted: TX pin signal values are inverted

DINV

Bit 18: Data bit level inversion.

Allowed values:
0: Positive: Logical data from the data register are send/received in positive/direct logic
1: Negative: Logical data from the data register are send/received in negative/inverse logic

MSBF

Bit 19: Most significant bit first.

Allowed values:
0: LSB: Data is transmitted/received with data bit 0 first, following the start bit
1: MSB: Data is transmitted/received with MSB (bit 7/8/9) first, following the start bit

ABDEN

Bit 20: Auto baud rate enable.

Allowed values:
0: Disabled: Auto baud rate detection is disabled
1: Enabled: Auto baud rate detection is enabled

ABDM

Bits 21-22: Auto baud rate mode.

Allowed values:
0: Start: Measurement of the start bit is used to detect the baud rate
1: Edge: Falling edge to falling edge measurement

RTEN

Bit 23: Receiver timeout enable.

Allowed values:
0: Disabled: Receiver timeout feature disabled
1: Enabled: Receiver timeout feature enabled

ADDR

Bits 24-31: Address of the USART terminal.

Allowed values: 0-255

CTL2

Control register 2

Offset: 0x8, reset: 0x00000000, access: read-write

19/19 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUIE
rw 		WUM
rw 		SCRTNUM
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
DEP
rw 		DEM
rw 		DDRE
rw 		OVRD
rw 		OSB
rw 		CTSIE
rw 		CTSEN
rw 		RTSEN
rw 		DENT
rw 		DENR
rw 		SCEN
rw 		NKEN
rw 		HDEN
rw 		IRLP
rw 		IREN
rw 		ERRIE
rw
Toggle Fields.

ERRIE

Bit 0: Error interrupt enable.

Allowed values:
0: Disabled: Error interrupt is disabled
1: Enabled: An interrupt is generated when FERR=1 or ORERR=1 or NERR=1 in the STAT register

IREN

Bit 1: IrDA mode enable.

Allowed values:
0: Disabled: IrDA disabled
1: Enabled: IrDA enabled

IRLP

Bit 2: IrDA low-power.

Allowed values:
0: Normal: Normal mode
1: LowPower: Low-power mode

HDEN

Bit 3: Half-duplex selection.

Allowed values:
0: NotSelected: Half duplex mode is not selected
1: Selected: Half duplex mode is selected

NKEN

Bit 4: NKEN enable in Smartcard mode.

Allowed values:
0: Disabled: NACK transmission in case of parity error is disabled
1: Enabled: NACK transmission during parity error is enabled

SCEN

Bit 5: Smartcard mode enable.

Allowed values:
0: Disabled: Smartcard Mode disabled
1: Enabled: Smartcard Mode enabled

DENR

Bit 6: DMA enable for reception.

Allowed values:
0: Disabled: DMA mode is disabled for reception
1: Enabled: DMA mode is enabled for reception

DENT

Bit 7: DMA enable transmitter.

Allowed values:
0: Disabled: DMA mode is disabled for transmission
1: Enabled: DMA mode is enabled for transmission

RTSEN

Bit 8: RTS enable.

Allowed values:
0: Disabled: RTS hardware flow control disabled
1: Enabled: RTS output enabled, data is only requested when there is space in the receive buffer

CTSEN

Bit 9: CTS enable.

Allowed values:
0: Disabled: CTS hardware flow control disabled
1: Enabled: CTS mode enabled, data is only transmitted when the CTS input is asserted

CTSIE

Bit 10: CTS interrupt enable.

Allowed values:
0: Disabled: Interrupt is disabled
1: Enabled: An interrupt is generated whenever CTS=1 in the STAT register

OSB

Bit 11: One sample bit method.

Allowed values:
0: Sample3: Three sample bit method
1: Sample1: One sample bit method

OVRD

Bit 12: Overrun Disable.

Allowed values:
0: Enabled: Overrun Error Flag, ORE, is set when received data is not read before receiving new data
1: Disabled: Overrun functionality is disabled. If new data is received while the RXNE flag is still set the ORE flag is not set and the new received data overwrites the previous content of the RDATA register

DDRE

Bit 13: Disable DMA on reception error.

Allowed values:
0: NotDisabled: DMA is not disabled in case of reception error
1: Disabled: DMA is disabled following a reception error

DEM

Bit 14: Driver enable mode.

Allowed values:
0: Disabled: DE function is disabled
1: Enabled: The DE signal is output on the RTS pin

DEP

Bit 15: Driver enable polarity mode.

Allowed values:
0: High: DE signal is active high
1: Low: DE signal is active low

SCRTNUM

Bits 17-19: Smartcard auto-retry number.

Allowed values: 0-7

WUM

Bits 20-21: Wakeup mode from Deep-sleep mode.

Allowed values:
0: Address: WUF active on address match
2: Start: WUF active on start bit detection
3: RXNE: WUF active on RBNE

WUIE

Bit 22: Wakeup from Deep-sleep mode interrupt enable.

Allowed values:
0: Disabled: Wake-up from deep-sleep mode interrupt is disabled
1: Enabled: Wake-up from deep-sleep mode interrupt is generated whenever WUF=1 in the STAT register

BAUD

Baud rate generator register

Offset: 0xC, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
INTDIV
rw 		FRADIV
rw
Toggle Fields.

FRADIV

Bits 0-3: Fraction part of baud-rate divider.

Allowed values: 0-15

INTDIV

Bits 4-15: Integer part of baud-rate divider.

Allowed values: 0-4095

GP

Prescaler and guard time configuration register

Offset: 0x10, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
GUAT
rw 		PSC
rw
Toggle Fields.

PSC

Bits 0-7: Prescaler value for dividing the system clock.

Allowed values: 0-255

GUAT

Bits 8-15: Guard time value in smartcard mode.

Allowed values: 0-255

RT

Receiver timeout register

Offset: 0x14, reset: 0x00000000, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
BL
rw 		RT
rw
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RT
rw
Toggle Fields.

RT

Bits 0-23: Receiver timeout value.

Allowed values: 0-16777215

BL

Bits 24-31: Block Length.

Allowed values: 0-255

CMD

Request register

Offset: 0x18, reset: 0x00000000, access: write-only

5/5 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TXFCMD
w 		RXFCMD
w 		MMCMD
w 		SBKCMD
w 		ABDCMD
w
Toggle Fields.

ABDCMD

Bit 0: Auto baudrate detection command.

Allowed values:
1: Request: Resets the ABRF flag in the USART_ISR and request an automatic baud rate measurement on the next received data frame

SBKCMD

Bit 1: Send break command.

Allowed values:
1: Break: Sets the SBKF flag and request to send a BREAK on the line, as soon as the transmit machine is available

MMCMD

Bit 2: Mute mode command.

Allowed values:
1: Mute: Puts the USART in mute mode and sets the RWU flag

RXFCMD

Bit 3: Receive data flush command.

Allowed values:
1: Discard: Clears the RBNE flag. This allows to discard the received data without reading it, and avoid an overrun condition

TXFCMD

Bit 4: Transmit data flush request.

Allowed values:
1: Discard: Set the TBE flag. This allows to discard the transmit data

STAT

Interrupt & status register

Offset: 0x1C, reset: 0x000000C0, access: read-only

22/22 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
REA
r 		TEA
r 		WUF
r 		RWU
r 		SBF
r 		AMF
r 		BSY
r
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
ABDF
r 		ABDE
r 		EBF
r 		RTF
r 		CTS
r 		CTSF
r 		LBDF
r 		TBE
r 		TC
r 		RBNE
r 		IDLEF
r 		ORERR
r 		NERR
r 		FERR
r 		PERR
r
Toggle Fields.

PERR

Bit 0: Parity error flag.

FERR

Bit 1: Frame error flag.

NERR

Bit 2: Noise error flag.

ORERR

Bit 3: Overrun error.

IDLEF

Bit 4: IDLE line detected flag.

RBNE

Bit 5: Read data buffer not empty.

TC

Bit 6: Transmission complete.

TBE

Bit 7: Transmit data register empty.

LBDF

Bit 8: LIN break detection flag.

CTSF

Bit 9: CTS change flag.

CTS

Bit 10: CTS level.

RTF

Bit 11: Receiver timeout.

EBF

Bit 12: End of block flag.

ABDE

Bit 14: Auto baudrate detection error.

ABDF

Bit 15: Auto baudrate detection flag.

BSY

Bit 16: Busy flag.

AMF

Bit 17: ADDR match flag.

SBF

Bit 18: Send break flag.

RWU

Bit 19: Receiver wakeup from Mute mode.

WUF

Bit 20: Wakeup from Deep-sleep mode flag.

TEA

Bit 21: Transmit enable acknowledge flag.

REA

Bit 22: Receive enable acknowledge flag.

INTC

Interrupt flag clear register

Offset: 0x20, reset: 0x00000000, access: write-only

12/12 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
WUC
w 		AMC
w
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EBC
w 		RTC
w 		CTSC
w 		LBDC
w 		TCC
w 		IDLEC
w 		OREC
w 		NEC
w 		FEC
w 		PEC
w
Toggle Fields.

PEC

Bit 0: Parity error clear flag.

Allowed values:
1: Clear: Clears the PERR bit in the STAT register

FEC

Bit 1: Framing error clear flag.

Allowed values:
1: Clear: Clears the FERR bit in the STAT register

NEC

Bit 2: Noise detected clear.

Allowed values:
1: Clear: Clears the NERR bit in the STAT register

OREC

Bit 3: Overrun error clear flag.

Allowed values:
1: Clear: Clears the ORERR bit in the STAT register

IDLEC

Bit 4: Idle line detected clear.

Allowed values:
1: Clear: Clears the IDLEF flag in the STAT register

TCC

Bit 6: Transmission complete clear flag.

Allowed values:
1: Clear: Clears the TC bit in the STAT register

LBDC

Bit 8: LIN break detected clear.

Allowed values:
1: Clear: Clears the LBDF flag in the STAT register

CTSC

Bit 9: CTS change clear.

Allowed values:
1: Clear: Clears the CTSF flag in the STAT register

RTC

Bit 11: Receiver timeout clear flag.

Allowed values:
1: Clear: Clears the RCF flag in the STAT register

EBC

Bit 12: End of timeout clear.

Allowed values:
1: Clear: Clears the EBF flag in the STAT register

AMC

Bit 17: ADDR match clear.

Allowed values:
1: Clear: Clears the AMF flag in the STAT register

WUC

Bit 20: Wakeup from Deep-sleep mode clear.

Allowed values:
1: Clear: Clears the WUF flag in the STAT register

RDATA

Receive data register

Offset: 0x24, reset: 0x00000000, access: read-only

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
RDATA
r
Toggle Fields.

RDATA

Bits 0-8: Receive data value.

Allowed values: 0-511

TDATA

Transmit data register

Offset: 0x28, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
TDATA
rw
Toggle Fields.

TDATA

Bits 0-8: Transmit data value.

Allowed values: 0-255

WWDGT

0x40002C00: Window watchdog timer

6/6 fields covered. Toggle Registers.

CTL

Control register

Offset: 0x0, reset: 0x0000007F, access: read-write

2/2 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
WDGTEN
rw 		CNT
rw
Toggle Fields.

CNT

Bits 0-6: watchdog timer counter.

Allowed values: 0-127

WDGTEN

Bit 7: Start the Window watchdog timer.

Allowed values:
0: Disabled: Watchdog disabled
1: Enabled: Watchdog enabled

CFG

Configuration register

Offset: 0x4, reset: 0x0000007F, access: read-write

3/3 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EWIE
rw 		PSC
rw 		WIN
rw
Toggle Fields.

WIN

Bits 0-6: The Window value.

Allowed values: 0-127

PSC

Bits 7-8: Prescaler.

Allowed values:
0: Div1: Counter clock (PCLK1 div 4096) div 1
1: Div2: Counter clock (PCLK1 div 4096) div 2
2: Div4: Counter clock (PCLK1 div 4096) div 4
3: Div8: Counter clock (PCLK1 div 4096) div 8

EWIE

Bit 9: Early wakeup interrupt enable.

Allowed values:
1: Enable: interrupt occurs whenever the counter reaches the value 0x40

STAT

Status register

Offset: 0x8, reset: 0x00000000, access: read-write

1/1 fields covered.

31 30 29 28 27 26 25 24 23 22 21 20 19 18 17 16
15 14 13 12 11 10 9 8 7 6 5 4 3 2 1 0
EWIF
rw
Toggle Fields.

EWIF

Bit 0: EEarly wakeup interrupt flag.

Allowed values:
1: Pending: The EWI Interrupt Service Routine has been triggered
0: Finished: The EWI Interrupt Service Routine has been serviced